TS 2658-1977 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO BOLLING WATER AND WATER VAPOUR《瓷釉和搪瓷 耐沸水和水蒸汽的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 3578-1996 PACKING PREFORMED C O-RING SEAL AMS7271《包装 O型环密封AMS 7271 FSC 5330》.pdf

SAE AS 3580-1996 BOLT MACHINE - DOUBLE HEX HEAD PD SHANK UNS N07718 - 185 KSI《UNS UNS N07718-185 KSIFSC 5306 PD杆双六角头机器螺栓》.pdf

SAE AS 3581-1996 PACKING PREFORMED C O-RING SEAL AMS7259《包装 O型环密封AMS 7259 FSC 5330》.pdf

SAE AS 3582-1996 PACKING PREFORMED C O-RING SEAL AMS3304《包装 O型环密封AMS 3304 FSC 5330》.pdf

SAE AS 3584A-2009 Pin and Plug Expansion Set of Parts CRES 416 or 416SE Long STD and 010 Oversize Diameters UNS S41600 UNS S41623《长型416或416SE成套零件膨胀销钉和插头 UNSS41600 UNS S41623型标准和 01.pdf

SAE AS 3585A-2009 Pin and Plug Expansion Set of Parts Cres 416 or 416SE STD and 010 Oversize Diameters Short UNS S41600 UNS S41623《UNS S41600 UNS S41623短型416或416SE标准及 010特大直径成套零件Cr.pdf

SAE AS 3586A-2009 Pin and Plug Expansion Set of Parts Cres 303 Long UNS S30300《UNS S30300长型Cres 303成套零件膨胀销钉和插头》.pdf

SAE AS 3587A-2009 Pin and Plug Expansion Set of Parts Std and 010 Oversize Diameters Cres 303 Short UNS S30300《UNS S30300短型Cres 303标准和 010特大直径成套零件膨胀销钉和插头》.pdf

SAE AS 3588A-2009 Pin and Plug Expansion Set of Parts AL Alloy 2024-T4 and 2024-T351 Short STD and 010 Oversize Diameters UNS A92024《2024-T4和2024-T351铝合金短型成套部件膨胀插针和插头 UNS A92024型标准.pdf