TS 3095-1978 Determination of color of dyed aviation gasolines《着色航空汽油颜色的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 1749-1989 MJ螺纹紧固件 螺母的形状和位置公差.pdf

QJ 175-1993 超高强度钢熔焊通用技术条件.pdf

QJ 1750-1989 MJ螺纹紧固件 螺栓试验方法.pdf

QJ 1751-1989 MJ螺纹紧固件最高工作温度小于或等于425℃的普通和开槽螺母试验方法.pdf

QJ 1752-1989 MJ螺纹紧固件最高工作温度小于或等于425℃的自锁螺母试验方法.pdf

QJ 1753-1989 MJ螺纹紧固件最高工作温度大于425℃的自锁螺母试验方法.pdf

QJ 1756-1989 MJ螺纹紧固件最高工作温度大于425℃的自锁螺母技术条件.pdf

QJ 1757-1989 MJ螺纹紧固件1100MPa合金钢螺栓技术条件.pdf

QJ 1758-1989 MJ螺纹紧固件 1100MPa耐热不锈钢螺栓技术条件.pdf