TS 50-1962 FUSE PLUGS FOR DOMESTIC USE《国内使用插塞式保险丝》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 7687-2-2013 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2 Machines with movable column and fixed table《机.pdf

TCVN 7687-3-2013 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 3 Machines with movable column and movable table.pdf

TCVN 7688-2007 Test conditions for internal cylindrical grinding machines with horizontal spindle Testing of accuracy《水平轴内圆磨床试验条件 精度检验》.pdf

TCVN 7689-2007 Machine tools Test conditions for surface grindingmachines with vertical grinding wheel spindle and reciprocating table Testing of the accuracy《机床 设有立式磨床心轴和往复式工作台的平面.pdf

TCVN 7690-2005 Plastic form work for concrete《混凝土塑性工作》.pdf

TCVN 7691-2007 Test conditions for surface grinding machines with two columns Machines for grinding slideways Testing of the accuracy《双柱式平面磨床的验收条件 导轨磨床 精度试验》.pdf

TCVN 7693-2007 Gears Surface temper etch inspection after grinding《齿轮 磨光后的表面回火侵蚀检查》.pdf

TCVN 7694-2007 Solid (monobloc) gear hobs with tenon drive or axial keyway 0 5 to 40 module Nominal dimensions《模数0 5至40榫传动或轴键带动的实心(整体)齿轮滚刀 标称尺寸》.pdf

TCVN 7695-1-2007 Gears FZG test procedures Part 1 FZG test method A 8 3 90 for relative scuffing load-carrying capacity of oils《齿轮 FZG试验程序 第1部分 油品的相对变形承载能力用FZG试验方法A 8 3 90》.pdf