TS 769-1971 OILSEED RES DUES DETERMINATION OF OIL CONTENT《油籽残留物 含油量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 20105-A02-1994 en Textiles - Tests for Colour Fastness - Part A02 Grey Scale for Assessing Change in Colour《纺织品 色牢度试验 第A02部分 颜色变化评定用灰度标》.pdf

EN 20105-A03-1994 en Textiles - Tests for Colour Fastness - Part A03 Grey Scale for Assessing Staining《纺织品 色牢度试验 第A03部分 沾污评定的灰度标［ISO 105-A03-1993］》.pdf

EN 20105-N01-1995 en Textiles - Tests for Colour Fastness - Part N01 Colour Fastness to Bleaching Hypochlorite《纺织品 色牢度试验 第N01部分 耐漂白色牢度 次氯酸盐(ISO 105-N01-1993)》.pdf

EN 20273-1991 en Fasteners - Clearance Holes for Bolts and Screws《紧固件 螺栓和螺钉通孔》.pdf

EN 20594-1 A1-1997 Conical fittings with a 6% (Luer) taper for syringes needles and certain other medical equipment - Part 1 General requirements (ISO 594-1 1986) Amendment A1《注射器、.pdf

EN 20594-1-1993 en Conical Fittings with a 6% (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1 General Requirements (Incorporates Amendment A1 1997)《注.pdf

EN 20693-1991 en Dimensions of Seam Welding Wheel Blanks《缝焊轮坯尺寸 (ISO 693-82)》.pdf

EN 20811-1992 en Textiles - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test《纺织品 耐透水性的测定 静水压试验》.pdf

EN 20865-1991 en Slots in Platens for Projection Welding Machines《凸焊机面板槽(ISO 865-81)》.pdf