1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1017 Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing MachinesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPY
2、RIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines, UL 1017 Ninth Edition, Dated April 13, 2015 Summary of Topics The new edition of ANSI/UL 1017 dated
3、 April 13, 2015, was issued to incorporate the following new and revised requirements: a) Molded and Stamped Marking Dimensions, b) International Symbol for DC Rated Products, c) End Product Flame Tests, d) Pet Grooming Attachment, e) Test Carpet Requirements, f) Abnormal Operation: Electronic Compo
4、nent Exception for Motor-Driven Brushes, g) Maintenance of Mean Wattage During Normal Temperature Test, h) Grounding of Permanently Connected Appliances, i) Shop-type Vacuum Provided with Two or More General-Use Receptacles, j) Cord Reels, k) Electronic Control Requirements and Switch Requirements,
5、l) Appliances Shipped Partially Disassembled, m) Motor Requirements, n) Class F (155 C) Insulation System Maximum Temperature Rise Requirements, o) Cleaning Fluid Identication, p) Attachment Plug Conguration and Amp Ratings, q) Electrical Bonding Through Motor Bearing Surfaces, r) Exceptions to Ther
6、moplastic Motor Insulation System Tests, s) Cord Retention and Extension Cord Requirements, t) Air Flow Rate for the Internal Abrasion Test, u) Vacuum Cleaner with Steam-Cleaning Attachment, v) Wet/Dry Pick-Up Household and Blower Cleaner not Provided with a Container, w) SPT Cord, x) Update of UL/C
7、SA Standards for Outlet Boxes and Cover Plates, y) Hard Surface Attachment and/or Proprietary Fluid not Provided with the Appliance, z) Mechanical Valve Endurance Test, aa) Component Requirements, ab) Glow-Wire End-Product Test in Lieu of HWI Requirements, ac) Figure 25 Correction, ad) Automatic Rec
8、hargeable Battery-Powered Vacuum Cleaner Requirements, ae) Electrical Quick-Connect Terminals, af) Temperature of Hot Water, ag) Internal Wiring and Interconnecting Cord Flexing Test Alternate Compliance Criteria, ah) Shop-Type Vacuum Cautionary Marking and Instructions, ai) Appliances Generating Ul
9、traviolet (UV) Radiation, aj) Secondary Circuits and the Level of Evaluation Required, ak) Floor Sweeper Requirements, al) Rotating Plug Used on Current-Carrying Hose End Fitting, am) Movable Guard on a Motorized Nozzle, an) Polymeric Fluid-Handling Component Requirements Revisions, Corrections, and
10、 Proposed New Conditioning, ao) Motor Overload Protection Overcurrent Protection, ap) Switches Used with Central Vacuums, aq) Revisions to Clause 7 Rechargeable Battery- Powered Portable Appliance Requirements, ar) Ampere Ratings for an Attachment Plug, as) Clarication of the Location for the Cord F
11、lex Test, at) Clarication of Height and Distance Requirements for Use with Volatile Flammable Liquids, au) Clarication of Marking Requirements, av) Clarication of Location for Measuring Cord Length, aw) Addition of Wording Regarding Connections Using Pigtail Cords on Wet Surfaces, ax) Addition of Wo
12、rding Allowing Very Large Utility Vacuum Cleaners to be Rated at Full Supply Ampacity. The new and revised requirements are substantially in accordance with Proposal(s) on this subject dated May 30, 2014, and November 7, 2014. For further information regarding the Summary of Requirements, please vis
13、it https:/ THIS NINTH EDITION REPLACES THE EIGHTH EDITION. AS OF JANUARY 2, 2018, UL 1017, EIGHTH EDITION WILL BE WITHDRAWN. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying,
14、 recording, or otherwise without prior permission of UL. APRIL 13, 2015 UL 1017 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not l
15、imited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability t
16、o use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards f
17、or Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer sys
18、tem. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated on this transmittal notice. The prior text for requirements that have been revised and that have a future e
19、ffective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. APRIL 13, 2015 UL 1017 tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CSA C22.2 No. 243-15 Fifth Edition Underwriters Laborator
20、ies Inc. UL 1017 Ninth Edition Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines April 13, 2015 ANSI/UL 1017-2015UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly
21、 by the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the
22、standards development procedures of CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-77139-599-1 2015 CSA Group All rights reserved. No part of this publication may be reproduced
23、 in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information t
24、o inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store
25、 at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2015 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and r
26、ights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Ninth Edition. The most recent designation of ANSI/UL 1017 as an American National Standard (ANSI) occurred on April 13, 2015. ANSI approval for a standard does not in
27、clude the Cover Page, Transmittal Pages, Title Page (front and back), Preface, or Annex H. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development Syste
28、m (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .7 1 Scope .9 2 General .10 2.1 Attachments 10 2.2 Fluids Proprietary
29、 11 2.3 Instructions provided with the appliance 12 2.4 Secondary circuits .12 2.5 Units of measurement 12 2.6 Reference publications .12 3 Denitions 21 4 Construction .24 4.1 Components 24 4.2 Enclosures .26 4.3 Mechanical assembly 31 4.4 Corrosion protection .32 4.5 Supply connections 33 4.6 Curre
30、nt-carrying parts 40 4.7 Internal wiring and external interconnections 41 4.8 Electrical insulation 45 4.9 Motors .46 4.10 Switches, relays, and similar controls .49 4.11 Controls End product test parameters .53 4.12 Capacitors .56 4.13 Lampholders .57 4.14 Receptacles .58 4.15 Spacings 60 4.16 Grou
31、nding and bonding .63 4.17 Protective devices 64 4.18 Heating elements Vacuum with steam-cleaning attachment 66 4.19 Thermal links 66 4.20 Protection against injury to persons .66 5 Tests .73 5.1 General 73 5.2 Normal loads .73 5.3 Leakage current .77 5.4 Leakage current following humidity condition
32、ing .78 5.5 Leakage current Abnormal operating conditions .79 5.6 Starting current 79 5.7 Rating .80 5.8 Temperature 80 5.9 Severe operating conditions 82 5.10 Abnormal operation .82 5.11 Dielectric voltage-withstand test 84 5.12 Resistance to moisture 85 5.13 Stability .97 5.14 Strain relief 98 5.1
33、5 Switches, relays, and similar controls .98 5.16 Cord reel exing .99 5.17 Power-supply cord exing 100 APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.18 Internal wiring and interconnecting cord
34、 exing .101 5.19 Physical abuse .102 5.20 Strength of handles .103 5.21 Polymeric enclosure parts 104 5.22 Polymeric materials used as structural support 109 5.23 Adhesives 109 5.24 Thermoplastic motor insulation systems 111 5.25 End-product arc resistance .113 5.26 Abnormal overload 113 5.27 Glow-w
35、ire end-product test .114 5.28 Blower cleaner impeller tests .114 5.29 Integral insulation .115 5.30 Testing of temperature control devices used in a vacuum with a steam-cleaning attachment .116 5.31 Mechanical valve endurance test 117 5.32 General purpose transformers 117 5.33 Interlock system endu
36、rance Floor sweepers 118 6 Double Insulation .118 6.1 Scope 118 6.2 Denitions .119 6.3 Construction general 119 6.4 Reinforced insulation .120 6.5 Power supply cord 123 6.6 Strain relief 123 6.7 Bushings 123 6.8 Capacitors .123 6.9 Extra-low voltage circuits .123 6.10 Spacings .123 6.11 Internal wir
37、ing .123 6.12 Leakage-current test .124 6.13 Dielectric voltage-withstand test .125 6.14 Insulation resistance .125 6.15 Resistance to impact test 126 6.16 Abnormal operation test 126 6.17 Overload test on motors .126 6.18 Investigation of armature employing reinforced insulation 127 6.19 Resistance
38、 to moisture test .128 6.20 Manufacturing and production tests .128 7 Rechargeable Battery-Powered Appliances 128 8 Current-carrying hoses and accessory electried wall valves .130 8.1 Scope 130 8.2 Construction General .131 8.3 Tests General 132 8.4 Dielectric voltage-withstand test 132 8.5 Leakage-
39、current test 132 8.6 Oven conditioning test 133 8.7 Voltage drop test .133 8.8 Temperature test .133 8.9 Overload test 134 8.10 Limited overcurrent test 134 8.11 Crushing test .135 8.12 Thermal shock test 135 8.13 Flexing test .136 APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 4UL COPYRIGHTED MATERIAL
40、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 8.14 Abrasion test .137 8.15 Wet pick-up 138 8.16 Endurance test .139 8.17 Marking 139 9 Appliances Generating Ultraviolet (UV) Radiation .139 9.1 General .139 9.2 Construction .140 9.3 Protection against injury to p
41、ersons .140 9.4 Performance .142 9.5 Markings 145 9.6 Instructions 146 10 Manufacturing and Production Tests .146 10.1 Dielectric voltage-withstand .146 10.2 Grounding-continuity .148 11 Marking 148 11.1 General 148 11.2 Permanence 150 11.3 Details .150 11.4 Cautionary .152 12 Instruction Manual .15
42、6 12.1 General 156 12.2 Instructions pertaining to a risk of re, electric shock, or injury to persons 157 12.3 Grounding/double insulation instructions .162 12.4 Polarization instructions 164 12.5 Installation and operating instructions 164 12.6 User-maintenance instructions 167 12.7 Proprietary uid
43、 instructions 167 ANNEX A (Normative) A1 Probe Tolerances .207 ANNEX B (Normative) Tab Terminals B1 General 208 B2 Material Requirements .208 B3 Dimensional Requirements .208 ANNEX C (Normative) C1 International Symbols 214 ANNEX D (Informative) Secondary Circuits and the Level of Evaluation Require
44、d D1 General 215 D2 Class 2 Circuits .216 D3 Limited Voltage/Current Circuits .217 D4 Limited Voltage Circuit Requirements 218 D5 Limited Energy Circuits 219 APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSIO
45、N FROM UL D6 Limiting Impedance Circuits 220 D7 Safety Extra-Low Voltage Circuits .222 D8 Secondary Circuit Tests 222 D8.1 General 222 D8.2 Maximum voltage .223 D8.3 Maximum current test for inherently limited circuits 223 D8.4 Maximum power (limited energy) test 224 D8.5 Limited power point determi
46、nation test .224 D8.6 Power dissipation test .225 D8.7 Component failure 225 ANNEX E (Informative) E1 Test Carpet and Padding Specications 227 ANNEX F (Informative) F1 Flowchart For Polymeric Fluid Handling Components (PFHC) .228 ANNEX G (Informative) Methods of Applying ISO 13849-1 to Appliances G1
47、 General 230 G2 Risk Assessment 230 G3 Residual Risk Analysis .230 G4 Performance Levels .231 ANNEX H French Language Markings This ANNEX is provided for information only APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITH
48、OUT PERMISSION FROM UL Preface This is the harmonized CSA Group, and UL standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines. It is the fth edition of CSA-C22.2 No. 243, and the ninth edition of UL 1017. This edition of CSA-C22.2 No. 243 supersedes the previous editi
49、on(s) published in 2010. This edition of UL 1017 supersedes the previous edition(s) published in 2010. This harmonized standard was prepared by the CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Vacuum Cleaner industry of both the USA and Canada are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This
