1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a
2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): LZFEStandard Number: UL 1995Standard Title: Standard for Heating and Cooling EquipmentEdition Date: July 31, 2015Edition Number: 5Section / Paragraph Referen
3、ce: 79.10Subject: Correction of the water failure testDECISION:Water failure test79.10 A heat pump water heater shall be operated in accordance with Clauses 79.5 to 79.7 until allconditions have stabilized. The water flow shall then be restricted or stopped. The refrigerant pressure thatresults unde
4、r this condition shall not exceed one-fifth third of the pressure that the system is capable ofwithstanding without failure.RATIONALE FOR DECISION:The strength tests in UL 1995, 5thedition, Clause 34.3, were reduced from 5X pressure to 3X pressure toalign with the pressure requirements in UL 60335-2
5、40. This fact was incorrectly overlooked in UL 1995,5thedition, and this Certification Requirement Decision is intended to document this correction.In the water failure test, UL 1995, 4thedition, the refrigerant pressure was required not to exceed 1/5 ofthe system pressure based on the pressure com
6、ponents required to meet a 5X pressure strength test.Since UL 1995, 5thedition requires a 3X pressure strength test, the pressure requirements in Clause79.10 are required to be 1/3 of that total pressure, rather than 1/5 of the total system pressure.Copyright 2015 Underwriters Laboratories Inc.UL, i
7、n performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of Underwriters Laboratories Inc. in
8、practically applying the requirements of the standard. They do not represent formal interpretations of thestandard under American National Standards Institute (ANSI) processes. UL shall not be responsible toanyone for the use of or reliance upon Certification Requirement Decisions by anyone. UL shal
9、l not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the use or reliance upon Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1995 -2-No Text on This Page
