1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 636 Holdup Alarm Units and Systems STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AU
2、THORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Holdup Alarm Units and Systems, UL 636 Eleventh Edition, Dated January 30, 2018 Summary of Topics This eleventh edition of the Standard for Holdup Alarm Units and Systems, UL 636, was issued to al
3、low the use of electronic media for providing documentation. The revised requirements are substantially in accordance with Proposal(s) on this subject dated October 23, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
4、by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In n
5、o event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised
6、 of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any los
7、s, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. JANUARY 30, 2018 UL 636 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER
8、REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 30, 2018 UL 636 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 30, 2018 1 UL 636 Standard for Holdup Alarm Units and Systems First Edition July,
9、 1933 Second Edition June, 1945 Third Edition November, 1952 Fourth Edition February, 1958 Fifth Edition September, 1972 Sixth Edition July, 1973 Seventh Edition August, 1978 Eighth Edition July, 1980 Ninth Edition June, 1987 Tenth Edition November, 1996 Eleventh Edition January 30, 2018 This ANSI/U
10、L Standard for Safety consists of the Eleventh Edition. The most recent designation of ANSI/UL 636 as an American National Standard (ANSI) occurred on January 30, 2018. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, and Title Page. The Department of Defense (DoD) ha
11、s adopted UL 636 on July 30, 1987. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs
12、On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall rema
13、in the sole and exclusive property of UL. COPYRIGHT 2018 UNDERWRITERS LABORATORIES INC. ANSI/UL 636-2018UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 2 No Text on This PageUL COPYRIG
14、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .8 2 Components8 3 Units of Measurement .8 4 Undated References 9 5 Terminology 9 6 Glossary .9 INSTRUCTIONS AND DRAWINGS 7 General.10 CONSTRUCTION ASSEMBLY 8 General.11 9 P
15、rotection of Service Personnel .11 10 Enclosures .12 10.1 General .12 10.2 Openings13 10.3 Cast Metal.18 10.4 Sheet Metal .19 10.5 Nonmetallic 21 10.6 Doors, covers, and guards 22 10.7 Screens and expanded metal 22 11 Electric Shock 23 12 Corrosion Protection 23 FIELD WIRING CONNECTIONS 13 General24
16、 13.1 General .24 13.2 Field wiring compartment24 13.3 Terminals general application 24 13.4 Terminals qualied application .25 13.5 Leads .26 13.6 Cords and plugs .26 13.7 Polarity identication 27 14 Grounding .28 INTERNAL WIRING 15 General28 16 Separation of Circuits .29 17 Bonding for Grounding 29
17、 JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL COMPONENTS ELECTRICAL 18 General31 18.1 Mounting of components 31 18.2 Insulating materials .31 18.3 Current-carrying parts.32 18.4 Bu
18、shings 32 19 Capacitors .33 20 Overcurrent Protection 33 21 Semiconductors 33 22 Switches.33 23 Transformers, Coils, and Relays 33 SPACINGS 24 General34 PERFORMANCE 25 General35 26 Test Samples and Miscellaneous Data 36 27 FCC Requirements .36 28 Test Voltages 36 TESTS 29 Normal Operation Test 36 30
19、 Circuit Protection Test .37 31 Input Test37 32 Power Supply Test37 32.1 General .37 32.2 Battery tests .38 33 Power Failure Test39 34 Component Malfunction Test .39 35 Undervoltage Operation Test .39 36 Overvoltage Operation Test 40 37 Variable Ambient Temperature Test.40 38 Humidity Test 40 39 Lea
20、kage Current Tests for Cord-Connected Products .40 40 Electric Shock Current Test 45 41 Overload Test 48 41.1 General .48 41.2 Separately energized circuits 49 42 Endurance Test 49 42.1 General .49 42.2 Separately energized circuits 49 43 Jarring Test 49 44 Temperature Test.50 45 Dielectric Voltage-
21、Withstand Test .54 46 Abnormal Operation Test 55 47 Electrical Transient Tests 55 47.1 General .55 47.2 Supply line transients .55 JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 47.3
22、 Internally induced transients .57 47.4 Input/output circuit transients 57 48 AC Induction Test.58 49 Radio Frequency Interference Test .59 50 Polymeric Materials Test.60 51 Battery Replacement Test .60 52 Drop Test 60 53 Strain Relief Test .61 53.1 Flexible cords 61 53.2 Field-wiring leads.61 54 Ig
23、nition Through Bottom-Panel Openings Tests.61 54.1 General .61 54.2 Hot, aming oil .61 54.3 Molten PVC and copper.62 55 Mechanical Strength Tests for Enclosures .62 56 Tests on Special Terminal Assemblies 63 56.1 General .63 56.2 Disconnection and reconnection .63 56.3 Mechanical secureness .63 56.4
24、 Flexing test 63 56.5 Millivolt drop test .64 56.6 Temperature test .64 57 Marking Permanency Tests 64 SHORT RANGE RADIO FREQUENCY (RF) OPERATED INITIATING DEVICES 58 General64 59 Time to Report Alarm .65 60 Inoperative Transmitter Reporting.65 61 Battery Status Indication .66 62 Tamper Protection 6
25、6 63 Interference Protection 67 64 Reference Level Determination .67 64.1 Method I 67 64.2 Method 2 69 65 Interference Immunity .72 66 Frequency Selectivity73 67 Clash74 68 Clash Error 74 69 Error (Falsing) Rate .75 70 Throughput Rate76 71 Transmitter Stability Test 77 72 Transmitter Accelerated Agi
26、ng Test .77 73 Installation Instructions and User Manual 78 74 Test .78 75 Drop Test 78 MANUFACTURING AND PRODUCTION TESTS 76 General .79 77 Production Line Dielectric Voltage-Withstand Test for High-Voltage Products 79 78 Production Line Grounding Continuity Test for High-Voltage Cord-Connected Pro
27、ducts .80 JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARKING 79 General80 ACCESSORY EQUIPMENT 80 General82 81 Construction .83 82 Performance (Installation) Test .83 83 Markings.
28、83 OPERATION AND ELECTRICAL SUPERVISION 84 General84 POWER SUPPLIES 85 General84 86 Battery Standby 85 87 Rechargeable Batteries85 88 Nonrechargeable Batteries .86 INSTALLATION 89 Types of Remote Stations .87 90 Extent of Protection .87 90.1 General .87 90.2 Bandit-Resisting Enclosure and Alarm 87 9
29、0.3 Semiautomatic Alarm .88 90.4 Manual Alarm 88 OUTSIDE CABLES 91 General89 91.1 General .89 91.2 Underground wires .89 91.3 Overhead wires 89 WIRES INSIDE BUILDING 92 General90 92.1 General .90 92.2 Running and fastening 90 92.3 Splices and connections 91 92.4 Separation of interconnecting and pro
30、tective wiring from other wiring or objects91 92.5 Passage through oors and walls 91 MAINTENANCE 93 General92 Appendix A JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Standards for
31、ComponentsA1 JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover holdup alarm systems of the remote-station type intended for installatio
32、n in banks, stores, cashiers cages, pay offices, and the like to provide a means of transmitting a silent call for help in the event of interior robbery. These systems are divided into the three classes listed in 1.2 and are dened under Extent of Protection, Section 90. 1.2 The three classes are: Ba
33、ndit-Resisting Enclosure and Alarm, Semiautomatic Alarm, and Manual Alarm. 2 Components 2.1 Except as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the prod
34、ucts covered by this standard. 2.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.3 A comp
35、onent shall be used in accordance with its rating established for the intended conditions of use. 2.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures
36、not exceeding specied limits, and shall be used only under those specic conditions. 3 Units of Measurement 3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 3.2 Unless otherwise indicated, all voltage and current values menti
37、oned in this standard are rms. JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 4 Undated References 4.1 Any undated reference to a code or standard appearing in the requirements of th
38、is standard shall be interpreted as referring to the latest edition of that code or standard. 5 Terminology 5.1 The term product as used in this standard refers to all types of holdup alarm units. 6 Glossary 6.1 For the purpose of this standard the following denitions apply. 6.2 ALARM INITIATING DEV
39、ICE A switch operated by hand or foot, by key, by removal of currency bills, or by other means to initiate a holdup alarm signal. 6.3 CIRCUITS, ELECTRICAL: a) HIGH-VOLTAGE A circuit involving a potential of not more than 600 volts and having circuit characteristics in excess of those of a low-voltag
40、e power limited circuit. b) LOW-VOLTAGE A circuit involving a potential of not more than 30 volts AC, rms, 42.4 volts DC or AC peak. c) POWER LIMITED A circuit whose output is limited as specied in Tables 6.1 and 6.2. The power limitation shall be provided by the construction of the transformer, a x
41、ed impedance, a noninterchangeable fuse, a nonadjustable manual reset circuit protective device, or a regulating network. Table 6.1 Power limitations for inherently limited power source (Overcurrent protection not required) Circuit voltage V max a AC-DC, (volts) Maximum nameplate ratings Current lim
42、itation I max , b (amperes) VA, (volt amperes) Current, (amperes) 0to20 5.0 V max a 5.0 8.0 over 20 to 30 100 100/V max a 8.0 over 30 to 100 100 100/V max a 100/V max a over 100 to 250 DC only 0.030 V max a 0.030 0.030 NOTE Reproduced in part from the National Electrical Code ( NFPA 70), 1996 Editio
43、n, copyright National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. a V max : Maximum output voltage regardless of load with rated input applied. b I max : Maximum output after 1 minute of operation under any noncapacitive load, including short circuit. 6.4 LINE-VOLTAGE The volta
44、ge at any eld-connected source of supply nominally 50 60 Hz; 115, 208, or 230 volts. JANUARY 30, 2018 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 6.2 Power limitations for power sources not
45、inherently limited (Overcurrent protection required) Circuit voltage V max a AC-DC, (volts) Maximum nameplate ratings Current limitation I max , b (amperes) Power limitation (VA) max , c (volt amperes) Maximum overcurrent protection, (amperes) VA, (volt amperes) Current, (amperes) 0to20 5.0 V max a
46、5.0 1000/V max a 250 d 5.0 over 20 to 100 100 100/V max a 1000/V max a 250 d 100/V max a over 100 to 150 100 100/V max a 1.0 NA 1.0 NOTE Reproduced in part from the National Electrical Code ( NFPA 70), 1996 Edition, copyright National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
47、 a V max : Maximum output voltage regardless of load with rated input applied. b I max : Maximum output after 1 minute of operation under any noncapacitive load, including short circuit, and with overcurrent protection bypassed. c (VA) max : Maximum volt-ampere output regardless of load with overcur
48、rent protection bypassed. d If the power source is a transformer (VA) max is 350 or less when V max is 15 or less. 6.5 NORMAL STANDBY CONDITION The ready-to-operate condition existing prior to tripping or operation of the product. 6.6 PRIMARY BATTERY Any battery which by design or construction is no
49、t intended to be recharged. 6.7 RADIO FREQUENCY Electromagnetic radiation generally greater than 20 kHz. 6.8 SAFETY CIRCUIT Any primary or secondary circuit that is relied upon to reduce the risk of re, electric shock, or injury to persons (for example, an interlock). 6.9 SECONDARY BATTERY Any battery which by construction is intended to be recharged. INSTRUCTIONS AND DRAWINGS 7 General 7.1 Each product shall be provided with installation instructions and drawings w
