UNE 14 022 《用暴露电弧为非合金钢和弱合金钢进行手工焊接时为确定电极的拉伸和回弹试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESE-M1C171-A2-2008 GREASE - SILICONE CONTAINS FLUORESCENT DYE TO BE USED WITH FORD WSS-M99P1111-A (Shown On FORD ESE-M1C171-A)《含荧光染料的硅润滑脂 与标准FORD WSS-M99P1111-A一起使用 列于标准FO.pdf

FORD ESE-M1J61-C-2012 ENAMEL AIR DRY ENGINE EXEMPT SOLVENTS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESE-M1L100-A-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和三.pdf

FORD ESE-M1L100-B-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和三.pdf

FORD ESE-M1L102-A-2003 CABLE IGNITION - HIGH TENSION-RESISTANCE CORE (WIRE WOUND) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(线绕式)硅树脂护套和三.pdf

FORD ESE-M1L102-B-2002 CABLE IGNITION - HIGH TENSION - RESISTANCE CORE (WIRE WOUND) SILICONE JACKET AND EPDM INSULATION (8 MM) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(线绕式)硅树脂护套.pdf

FORD ESE-M1L115-A-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和三.pdf

FORD ESE-M1L116-A-2003 IGNITION CABLE - HIGH TENSION - RESISTANCE CORE (WIRE WOUND) ETHYLENE COPOLYMER JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯.pdf

FORD ESE-M1L99-A-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和绝缘层(8 m.pdf