UNE 21-127-1991 《额定电压》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 93E-2013 Cones Rear Propeller Hub《螺旋桨毂后锥体》.pdf

SAE AS 9403-1999 RIVET SOLID C UNIVERSAL HEAD AMS5737《FSC 5320 AMS 5737 通用头实心铆钉》.pdf

SAE AS 942A-1996 Pressure Altimeter System Minimum Safe Performance Standard《气压高度计系统的最低安全性能标准》.pdf

SAE AS 9432B-2003 BOLT TEE HEAD CHAMFERED - CRES UNS S66286 130 KSI MIN 1900-32 UNJF-3A《最小值为130 KSI的有槽UNS S66286耐蚀钢T形头螺栓 1900-32 UNJF-3A》.pdf

SAE AS 9434B-2003 BOLT TEE HEAD CHAMFERED - CRES UNS S66286 130 KSI MIN 3125-24 UNJF-3A《最小值为130 KSI的UNS S66286耐蚀钢刻槽T形头螺栓 3125-24 UNJF-3A》.pdf

SAE AS 943A-1986 Starter Pneumatic Aircraft Engine General Specification for.pdf

SAE AS 943A-1986 Starter Pneumatic Aircraft Engine General Specification for《飞机发动机气动启动器的一般规格》.pdf

SAE AS 9441B-2014 BOLT MACHINE - HEXAGON DRILLED 6 HOLES PD SHANK NICKEL CADMIUM PLATED STEEL UNS K14675 195 KSI MIN 2500-28 UNJF-3A《机制螺栓 2500-28 UNJF-3A 最小值为195 KSI UNS K14675钢制镀有.pdf

SAE AS 9444B-2014 BOLT MACHINE - HEXAGON DRILLED 6 HOLES PD SHANK NICKEL CADMIUM PLATED STEEL UNS K14675 195 KSI MIN 4375-20 UNJF-3A《机制螺栓 4375-20 UNJF-3A 最小值为195 KSI UNS K14675钢制镀有.pdf