UNE 38-168-1994 Aluminium and aluminium alloys Determination of silicon Gravimetric method《铝和铝合金 硅的确定 重力测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D936-A1-2012 POLYPROPYLENE (PP) COPOLYMER 30 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 30%玻璃纤维增强模塑材料 与福特WSS-M99P1111-A.pdf

FORD WSS-M4D937-A1-2010 POLYETHYLENE TEREPHTHALATE (PET) 13% GLASS FIBER MICA REINFORCED MOLDING COMPOUND 100% RECYCLED POLYMER TO BE USED WITH FORD WSS-M99P1111-A 《100%回收聚合物和13%.pdf

FORD WSS-M4D937-A2-2010 POLYETHYLENE TEREPHTHALATE (PET) 15 % GLASS FIBER REINFORCED MOLDING COMPOUND 100 % RECYCLED POLYMER TO BE USED WITH FORD WSS-M99P1111-A 《100%回收聚合物和15%玻璃纤.pdf

FORD WSS-M4D938-A1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D938-B1-2012 THERMOPLASTIC ELASTOMER (TPO) MOLDING COMPOUND MOLDED-IN-COLOR INTERIOR HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D939-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER HEAT STABILIZED 33% TALC FILLED 25% MIN RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《可再生料含量最低25%的.pdf

FORD WSS-M4D940-A1-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的热塑性聚烯径(TEO)弹性体成型料 与标准.pdf

FORD WSS-M4D940-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 18% GLASS FIBER REINFORCED HIGH IMPACT LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSS-M4D940-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 25% GLASS FIBER REINFORCED HIGH IMPACT HIGH SCRATCH RESISTANCE LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO.pdf