UNE 48-082-1985 《染料及清漆的变形梯度粘性的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 26604-1985 Non-woven textile sheets (backing) of fibres for thermal-sound-insulating linoleum Specifications《不同纤维制成的保暖隔音抗菌无纺布 技术条件》.pdf

GOST 26606-1985 Fibre-covered plastic-covered film-covered and enamelled fiber covered magned wire General specifications《瓷漆-纤维 纤维 塑料 薄膜绝缘绕组线 一般技术条件》.pdf

GOST 26607-1985 System of ensuring of geometrical parameters accuracy in construction Functional tolerances《保证建筑工程几保精度的体系 实用公差》.pdf

GOST 26608-1985 Blocks of two-kassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm Design and dimensions《800×800mm加热板.pdf

GOST 26609-1985 Blocks of three-cassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm Design and dimensions《800×800mm加.pdf

GOST 26611-1985 Straigh luming undercutting and coping tool holders with clamped changeable inserts pressed from the top Desing and dimensions《机械夹固式多刃刀片外圆车刀 结构及尺寸》.pdf

GOST 26612-1985 Boring tools with clamped shangeable inserts pressed from the top Design and dimensions《机械夹固式多刃刀片镗刀 结构及尺寸》.pdf

GOST 26614-1985 Powder antifriction materials Test method for determination of tribotechnical properties《抗磨粉末材料 磨擦技术性能测定法》.pdf

GOST 26615-1985 Enamelled winding wires Specifications《漆包绕组线 一般技术条件》.pdf