UNE 49 005 h2 《装量为12千克柠檬的底面积为400 x 300 的木盒》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 14268-2013 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268 2012) German version EN ISO 14268 2012《皮革 物理和机械试验 水蒸气渗透性测定(ISO.pdf

DIN EN ISO 14270-2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot seam and embossed projection.pdf

DIN EN ISO 14272-2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection wel.pdf

DIN EN ISO 14273-2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds .pdf

DIN EN ISO 14284-2003 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284 1996) German version EN ISO 14284 2002《钢铁 化合物样品取.pdf

DIN EN ISO 14310-2009 Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310 2008) English version EN ISO 14310 2008《石油和天然气工业 向下钻孔设备 封隔器和桥塞.pdf

DIN EN ISO 14314-2010 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314 2004) German version EN ISO 14314 2009《往复式内燃机 反冲起动.pdf

DIN EN ISO 14323-2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance sp).pdf

DIN EN ISO 14324-2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324 2003) German version EN ISO 14324 2003《.pdf