UNE 55-802-1985 《表面药剂 阳离子表面药剂（盐酸和溴酸）胶术信息的关键密度确定 离子对比活动的测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

FORD WSS-M4D663-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 33% GLASS FIBER REINFORCED LASER MARKABLE TO BE USED WITH FORD WSS-M99P1111-A 《可用激光标识的33%玻璃纤维增强的受热稳定的聚酰胺(PA)66 与标准FORD .pdf

FORD WSS-M4D664-A3-2006 POLYMIDE (PA) 6 HEAT STABILIZED 33% GLASS FIBER REINFORCED MINIMUM 25% PCR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D968-A)《最低PCR含量为25%的33%玻.pdf

FORD WSS-M4D664-A4-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER MINERAL REINFORCED MINIMUM 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D968.pdf

FORD WSS-M4D664-B1-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部热稳定30%玻璃纤维增强聚酰胺(PA)6模塑材料 与福特.pdf

FORD WSS-M4D665-A3-2012 POLYAMIDE 6 (PA6) 15% GLASS FIBER REINFORCED POST INDUSTRIAL RECYCLATE (PIR) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D665-B1-2016 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D665-B2-2017 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D666-A2-2006 POLYAMIDE 66 (PA66) IMPACT MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用冲击改性聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D666-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf