UNE 56-849-1987 《重型软物在中空门门页上碰撞的试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 5208-4-2008 Cranes Requirements for mechanisms Part 4 Jib cranes《起重机 机构要求 第4部分 臂架起重机》.pdf

TCVN 5208-5-2008 Cranes Requirements for mechanisms Part 5 Bridge and gantry cranes《起重机 机构要求 第5部分 桥式和龙门起重机》.pdf

TCVN 5209-1990 Loading cranes Safety requirements for electrical equipments《装载起重机 电气设备的安全要求》.pdf

TCVN 5210-1990 Loading cranes Requirements for electric preservative command apparatus《装载起重机 电力防腐剂命令装置的要求》.pdf

TCVN 5218-1990 Metal cutting machines Methods of perpendicularity inspection of the directions of two displacements《金属切削机 两次位移方向的垂直度检查方法》.pdf

TCVN 5219-1990 Metal cutting machines Methods for control of ecvidistance tradition《金属切削机 ecvidistance惯例的控制方法》.pdf

TCVN 5220-1990 Metal cutting machines Methods of parallelism inspection of the axis to plane《金属切削机 平面轴的平行度检查方法》.pdf

TCVN 5221-1990 Metal cutting machines Methods for control of constancy diameters of specimen《金属切削机 试样的等直径的控制方法》.pdf

TCVN 5222-1990 Vletal cutting machines Methods of inspection of the distance constant between trajectory of machine operating device and real surface《金属切削机 机械操作设备轨迹和实际表面之间距离常数的检查方法.pdf