UNE 66-802-1989 《实验室水平测试的组织及实行》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SNV 24052E-1943 《圆头螺栓上的铝制接头 直流及交流电 持续荷载 》.pdf

SNV 24053 E-1943 《纺织品 色牢度试验 第P01部分：耐干热干热色牢度（不包括烫平）》.pdf

SNV 24060E-1943 《螺栓，螺母和类似部件 技术供货条件 规格和尺寸准确性》.pdf

SNV 24440-1937 《P 型固定联轴器（配合螺栓）目录》.pdf

SNV 24441-1942 《直柄T形槽铣刀》.pdf

SNV 24460-1937 《管道 黑色金属管道注解和准则 无孔法兰》.pdf

SNV 24462-1937 《建筑物内部给水用节流阀》.pdf

SNV 24470-1937 《铣刀刀刃的几何形状 高速钢制成的机器和手动铰刀》.pdf

SNV 24472-1937 《数字控制的机器 数字控制的机械仪器穿孔带程序结构 格式规定》.pdf