UNE 71-107 Pt 2-1991 Identification cards Integrated circuit(s) with contacts Part 2 Dimensions and Location of the contacts《触摸式集成电路卡 第2部分：触点的尺寸及定位》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E62-154-1985 Machine tools Hack sawing machines Acceptance conditions Testing of accuracy 《机床 往复式锯床 验收条件 精确度测试》.pdf

NF E62-155-1985 Machine tools Vertical band saws Acceptance conditions Testing of accuracy 《机床 立式带锯机 验收条件 精确度测试》.pdf

NF E62-156-1985 Machines tools Horizontal band saws Acceptance conditions Testing of accuracy 《机床 卧式带锯机 验收条件，精确度测试》.pdf

NF E62-181-1983 Machine tools Vertical internal broaching machines Designation Dimensions Characteristics 《机床 立式内拉床 名称、尺寸和特征》.pdf

NF E62-182-1983 Machine tools Horizontal internal broaching machines Designation Dimensions Characteristics 《机床 卧式内拉床 名称、尺寸和特征》.pdf

NF E62-183-1983 Pullers with 4 clamps for internal pull-type broaching Part 1 general 《内拉式拉削用带四个夹具的拉出器 第1部分 总则》.pdf

NF E62-185-1983 Pullers with 4 clamps for internal pull-type broaching Part 3 dimensions and characteristics of pullers for broaches of diameters 28 to 32 《内拉削用带四个夹具的拉出器 第3部分 直径28.pdf

NF E62-190-1989 Tail end head with two catch fingers for pull broaching Dimensions and characteristics of heads for broaching tools of diameters 4 to 50 《拉削用的带两个卡销的尾挂钩头 直径4到50拉刀的主轴.pdf

NF E62-196-1989 Machine-tools Retriever for internal push type broaching with full ends shape W Part 1 general 《机床 内孔后推式拉削刀具端头 SW型 W形状 第1部分 总则》.pdf