UNE 74-020-1991 Acoustics Standard reference zero for the calibration of pure tone air conduction audiometers《空气式纯音听度计刻度用的标准零度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 3293-2016 Morse taper shank countersinks for angles 60 degrees 90 degrees and 120 degrees inclusive《60、90和120的莫氏锥柄锪钻》.pdf

BS ISO 3294-2016 Parallel shank countersinks for angles 60 90 and 120 degrees inclusive《60、90和120的直柄锪钻》.pdf

BS ISO 3302-1-2014 Rubber Tolerances for products Dimensional tolerances《橡胶 第1部分 产品公差 尺寸公差》.pdf

BS ISO 3303-1-2012 Rubber- or plastics-coated fabrics Determination of bursting strength Steel-ball method《橡胶或塑料涂层织物 破裂强度的测定 钢球法》.pdf

BS ISO 3303-2-2012 Rubber- or plastics-coated fabrics Determination of bursting strength Hydraulic method《橡胶或塑料涂层织物 破裂强度的测定 液压法》.pdf

BS ISO 3308-2012 Routine analytical cigarette-smoking machine Definitions and standard conditions《常规分析用吸烟机 定义和标准条件》.pdf

BS ISO 3310-1-2016 Test sieves Technical requirements and testing Test sieves of metal wire cloth《试验用筛 技术要求和试验 金属丝网布试验用筛》.pdf

BS ISO 3310-2-2013 Test sieves Technical requirements and testing Test sieves of perforated metal plate《试验筛 技术要求和试验 穿孔金属网试验筛》.pdf

BS ISO 3317-2015 Assembly tools for screws and nuts Square drive adaptor with hexagon or cylindrical flat drive for power socket wrenches《螺钉和螺母用装配工具 电源插座扳手用带有六角或圆柱平面传动的方形传动适配器》.pdf