DB64 T 163-1996 《饲料原料质量标准》.pdf

相关资源

CB- 3123-1982 轧制钢材气割面质量标准.pdf

DL T 1282-2013 火力发电厂气相缓蚀剂质量标准.pdf

DL T 1368-2014 电能质量标准源校准规范.pdf

DL T 912-2005 超临界火力发电机组水汽质量标准.pdf

DL T 941-2005 运行中变压器用六氟化硫质量标准.pdf

CB T 4000-2005 中国造船质量标准.pdf

CJJ T 174-2013 城市水域保洁作业及质量标准.pdf

JGJ 52-1992 普通混凝土用砂质量标准及检验方法.pdf

JGJ 53-1992 普通混凝土用碎石或卵石质量标准及检验方法.pdf

NY T 1353-2007 农业机械作业质量标准编写规则.pdf

猜你喜欢

GOST 24247-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转位的多面带孔和双面有碎屑器槽的硬质合金切.pdf

GOST 24248-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转位的多面带孔和双面有碎屑器槽硬质合金切削刀片 结.pdf

GOST 24249-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes on both faces Desing and dimensions《可转.pdf

GOST 24250-1980 Triangular throw-away (indexable) carbide cutting inserts with end-clearance angle and chip-breaking flutes Design and dimensions《可转位的多面带后角和碎屑器槽的三菱形硬质合金切削刀片 结构及尺寸》.pdf

GOST 24251-1980 Triangular throw-away (indexable) carbide cutting inserts with 20 end-clearance angle Design and dimensions《可转位的多面后角20硬质合金三菱切削刀片 结构及尺寸》.pdf

GOST 24252-1980 Square throw-away (indexable) carbide cutting inserts with end-clearance angle and chip-breaking flutes Design and dimensions《可转位的带后角和切屑槽的多面硬质合金方形切削刀片 结构及尺寸》.pdf

GOST 24253-1980 Square throw-away (indexable) carbide cutting inserts with 20 end-clearance angle Design and dimensions《可转位的后面20角的多面硬质合金矩形切削刀片 结构及尺寸》.pdf

GOST 24254-1980 Rhombic throw-away (indexable) carbide shims with 55 included angle Design and dimensions《可转位的菱形55角的多面硬质合金支承刀片 结构及尺寸》.pdf

GOST 24255-1980 Rhombic throw-away (indexable) carbide cutting inserts with 55 included angle and cylindrical holes Design and dimensions《可转位的菱形55带孔角的多面硬质合金切削刀片 结构及尺寸》.pdf