DB51 T 925-2009 《无公害川芎产地环境条件》.pdf

上传人:孙刚 文档编号:1233277 上传时间:2019-08-22 格式:PDF 页数:7 大小:147.59KB
下载 相关 举报
DB51 T 925-2009 《无公害川芎产地环境条件》.pdf_第1页
第1页 / 共7页
DB51 T 925-2009 《无公害川芎产地环境条件》.pdf_第2页
第2页 / 共7页
DB51 T 925-2009 《无公害川芎产地环境条件》.pdf_第3页
第3页 / 共7页
DB51 T 925-2009 《无公害川芎产地环境条件》.pdf_第4页
第4页 / 共7页
DB51 T 925-2009 《无公害川芎产地环境条件》.pdf_第5页
第5页 / 共7页
点击查看更多>>
资源描述

1、 13.020.99 DB51B38 四川省地方标准DB51/T 9252009无公害川芎产地环境条件 2009-03-05 发布 2009-03-10 实施四川省质量技术监督局发布DB51/T 9282009 I 目 次 前 言 . II 1 范围 1 2 规范性引用文件 1 3 技术要求 . . 14 检测方法 . 1 5 采样规则 . 3 6 判定原则 . 4 4 DB51/T 9282009 II 前 言 本标准由四川省农业厅提出并归口。 本标准由四川省质量技术监督局批准。 本标准由四川省农产品质量安全中心、四川省乐山农产品(畜产品)质量检测中心负责起草。 本标准主要起草人:纪建书、张

2、卫东、黄峥荣、杨徳芬、邱鹏、杨远、余俊修。 DB51/T 9282009 1 无公害川芎产地环境条件 1 范围 本标准规定了无公害川芎产地环境的质量指标、技术要求、检测方法和判定原则 本标准适用于评判无公害川芎产地环境质量。 2 规范性引用文件 下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。 GB/T 6920 水质 pH 值的测定 玻璃电极法 GB/T 7467 水质 六价铬的测定 二苯

3、碳酰二肼分光光度法 GB/T 7468 水质 总汞的测定 冷原子吸收分光光度法 GB/T 7475 水质 铜、铅、镉的测定 原子吸收分光光度法 GB/T 7484 水质 氟化物的测定 离子选择电极法 GB/T 7485 水质 总砷的测定 二乙基二硫代氨基甲酸银分光光度法 GB/T 7487 水质 氰化物的测定 第二部分 氰化物的测定 GB/T 8170 数值修约规定 GB/T 11896 水质 氯化物的测定 硝酸银滴定法 GB/T 11914 水质 化学需氧量的测定 重铬酸盐法 GB/T 15262 环境空气 二氧化硫的测定 甲醛吸收副玫瑰苯胺分光光度法 GB/T 15432 环境空气 总悬浮

4、颗粒物的测定 重量法 GB/T 15433 环境空气 氟化物的测定 滤膜氟离子选择电极法 GB/T 15435 环境空气 二氧化氮的测定 Saltzman 法 GB/T 16488 水质 石油类的测定 红外光度法 GB/T 17137 土壤质量 总铬的测定 火焰原子吸收分光光度法 GB/T 17138 土壤质量 铜的测定 火焰原子吸收分光光度法 GB/T 17141 土壤质量 铅、镉的测定 石墨炉原子吸收分光光度法 GB/T 22105.2 土壤质量 总汞、总砷、总铅的测定 原子荧光光谱法 NY/T 1121.5 土壤检测 第 5部分:石灰性土壤阳离子交换量的测定 NY/T 1121.12 土

5、壤检测 第12部分 土壤铬的测定 NY/T 1377 土壤pH的测定 SL 327.14 砷、汞、硒、铅的测定 原子荧光光谱法 HJ/T 84 水质 无机阴离子的测定 离子色谱法 DB51/T 336 无公害农产品( 种植业)产地环境条件 3 技术要求 3.1 无公害川芎产地环境条件 DB51/T 9282009 2 3.1.1 无公害川芎产地环境条件 选择海拔450mm 750mm,年平均气温1516, 年降水量1000mm 1300mm ,生态条件良好、远离污染源、有可持续生产能力的农业区域。 3.2 无公害川芎产地环境质量要求 3.2.1 灌溉水质量 应符合表 1 的规定。 表 1 灌溉

6、水质量指标 项 目 指 标 pH值 5.58.5 总砷(mg/L) 0.1 总铅(mg/L 0.2 总镉(mg/L) 0.01 六价铬(mg/L) 0.1 总汞(mg/L) 0.001 铜(mg/L) 1.0 石油类(mg/L) 10 化学需氧量(mg/L) 200 氯化物(mg/L) 350 氟化物(mg/L) 3.0 氰化物(mg/L) 0.5 3.2.2 土壤环境质量 应符合表 2 的规定。 表 2 土壤环境质量指标 项 目 指 标 pH值 6.5 6.57.5 7.5 镉,mg/kg 0.30 0.30 0.60 汞,mg/kg 0.30 0.50 1.0 砷,mg/kg 40 30

7、25 铅,mg/kg 250 300 350 铬,mg/kg 150 200 250 铜,mg/kg 50 100 100 3.2.3 空气环境质量 应符合表 3 的规定。 表 3 空气环境质量指标 项 目 日平均浓度 1小时平均浓度 总悬浮颗粒物(TSP)(标准状态),mg/ m3 0.30 二氧化氮(NO 2) (标准状态),mg/ m3 0.12 0.24 二氧化硫(SO 2) (标准状态),mg/ m3 0.15 0.50 氟化物(F)(标准状态) g/(dm2d)(挂片法) 7 DB51/T 9282009 3 4 检测方法 4.1 灌溉水质检测 4.1.1 pH 值的测定 按GB/

8、T 6920执行。 4.1.2 氯化物的测定 按GB/T 11896或HJ/T 84执行。 4.1.3 氟化物的测定 按GB/T 7484或HJ/T 84执行。 4.1.4 氰化物的测定 按GB/T 7487执行。 4.1.5 总汞的测定 按GB/T 7468或SL 327.2执行。 4.1.6 镉、铅的测定 按GBT 7475执行。 4.1.7 总砷的测定 按GBT 7485或SL 327.1执行。 4.1.8 铜的测定 按GB/T7475执行。 4.1.9 六价铬的测定 按GBT 7467执行。 4.1.10 石油类的测定 按GBT 16488执行。 4.2 土壤环境质量检测 4.2.1

9、总铅的测定 按GBT 17141执行。 4.2.2 总镉的测定 按GBT 17141执行 4.2.3 总汞的测定 按GB/T 22105.2执行。 4.2.4 总砷的测定 按GB/T 22105.2执行。 4.2.5 总铬的测定 按GBT 17137或NY/ T 1121.12执行。 4.2.6 铜的测定 按GBT 17138执行。 4.2.7 pH 的测定 按NY/T 1377执行。 4.3 环境空气质量检测 4.3.1 总悬浮颗粒物的测定 按GBT 15432执行。 4.3.2 二氧化硫的测定 按GBT 15262执行。 4.3.3 二氧化氮的测定 按GBT 15435执行。 DB51/T

10、 9282009 4 4.3.4 氟化物的测定 按GBT 15433执行。 5 采样规则 按DB51/336规定执行。 6 判定原则 6.1 检验结果的数据修约 按GBT 8170执行。 6.2 判定方法 按DB51/336执行。 6.3 无公害判定标准 6.3.1 水质判定标准 根据DB51/336判定方法计算获得的灌溉水质的综合污染指数,按表4标准对产地灌溉水质量进行判定。 表 4 无公害川芎产地环境水质质量判定标准 综合污染指数 污染程度 污染水平 判定原则 0.5 清洁 安全 适宜 0.51.0 尚清洁 标准限量内 基本适宜 1.0 污染 超出警戒水平 不适宜 6.3.2 土壤质量判定

11、标准 根据DB51/336判定方法计算获得的土壤的综合污染指数, 按表5标准对产地土壤环境质量进行判定。 表 5 无公害川芎产地环境土壤质量判定标准 综合污染指数 污染程度 污染水平 判定原则 0.7 清洁 安全 适宜 0.71.0 尚清洁 标准限量内 基本 1.0 污染 超出警戒水平 不适宜 6.3.3 环境空气质量判定标准 根据DB51/336判定方法计算获得的环境空气的综合污染指数, 按表6标准对产地空气质量进行判定。 表 6 无公害川芎产地环境空气质量判定标准 综合污染指数 污染程度 污染水平 判定原则 0.6 清洁 安全 适宜 0.61.0 尚清洁 标准限量内 基本适宜 1.0 污染 超出警戒水平 不适宜 6.4 无公害产地环境质量总体判定标准 产地的农用水、土壤、空气中,只要有一类或一类以上综合污染指数1,则判该产地环境条件不适宜无公害川芎生产。 _

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 60712-1995 Helical-scan video-tape cassette system using 19 mm (3 4 in) magnetic tape known as U-format (IEC 60712 1993 + A1 1993) German version EN 60712 1994 + A1 1994《U格式.pdf DIN EN 60712-1995 Helical-scan video-tape cassette system using 19 mm (3 4 in) magnetic tape known as U-format (IEC 60712 1993 + A1 1993) German version EN 60712 1994 + A1 1994《U格式.pdf
  • DIN EN 60717-2012 Method for the determination of the space required by capacitors and resistors with unidirectional terminations (IEC 60717 2012) German version EN 60717 2012《单向终端.pdf DIN EN 60717-2012 Method for the determination of the space required by capacitors and resistors with unidirectional terminations (IEC 60717 2012) German version EN 60717 2012《单向终端.pdf
  • DIN EN 60719-1994 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450.pdf DIN EN 60719-1994 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450.pdf
  • DIN EN 60721-1-1997 Classification of environmental conditions - Part 1 Environmental parameters and their severities (IEC 60721-1 1990 + A1 1992 + A2 1995) German version EN 60721.pdf DIN EN 60721-1-1997 Classification of environmental conditions - Part 1 Environmental parameters and their severities (IEC 60721-1 1990 + A1 1992 + A2 1995) German version EN 60721.pdf
  • DIN EN 60721-3-0-1994 Classification of environmental conditions part 3 classification of groups of environmental parameters and their severities introduction (IEC 60721-3-0 1984 +.pdf DIN EN 60721-3-0-1994 Classification of environmental conditions part 3 classification of groups of environmental parameters and their severities introduction (IEC 60721-3-0 1984 +.pdf
  • DIN EN 60721-3-1-1998 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 1 Storage (IEC 60721-3-1.pdf DIN EN 60721-3-1-1998 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 1 Storage (IEC 60721-3-1.pdf
  • DIN EN 60721-3-2-1998 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 2 Transportation (IEC 60.pdf DIN EN 60721-3-2-1998 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 2 Transportation (IEC 60.pdf
  • DIN EN 60721-3-3 A2-1997 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 3 Stationary use at w.pdf DIN EN 60721-3-3 A2-1997 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 3 Stationary use at w.pdf
  • DIN EN 60721-3-3-1995 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 3 Stationary use at weat.pdf DIN EN 60721-3-3-1995 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities section 3 Stationary use at weat.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 地方标准

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1