1、 IEC 60384-3-1 Edition 2.0 2006-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ Condensateurs fixes
2、utiliss dans les quipements lectroniques Partie 3-1: Spcification particulire cadre: Condensateurs fixes lectrolytiques au tantale pour montage en surface, lectrolyte solide au dioxyde de manganse Niveau dassurance EZ IEC 60384-3-1:2006 QC 300801 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 200
3、6 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Com
4、mittee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf in
5、dication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous ave
6、z des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec
7、.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is ke
8、pt under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, techni
9、cal committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electr
10、opedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Se
11、rvice Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique
12、Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vou
13、s assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte,
14、comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible
15、 en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel
16、Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 9
17、19 02 11 Fax: +41 22 919 03 00 IEC 60384-3-1 Edition 2.0 2006-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment
18、 level EZ Condensateurs fixes utiliss dans les quipements lectroniques Partie 3-1: Spcification particulire cadre: Condensateurs fixes lectrolytiques au tantale pour montage en surface, lectrolyte solide au dioxyde de manganse Niveau dassurance EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION
19、 ELECTROTECHNIQUE INTERNATIONALE N ICS 31.060.30 PRICE CODE CODE PRIX ISBN 2-8318-9861-7 QC 300801 2 60384-3-1 IEC:2006 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacit
20、ors with manganese dioxide solid electrolyte Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internationa
21、l co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter refer
22、red to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in
23、 this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internat
24、ional consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonabl
25、e efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Pub
26、lications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approva
27、l and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expe
28、rts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC P
29、ublication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC P
30、ublication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-3-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and re
31、places the first edition published in 1989 and constitutes a minor revision related to tables, figures and references. This bilingual version, published in 2008-06, corresponds to the English version. The text of this standard is based on the following documents: FDIS Report on voting 40/1772/FDIS 4
32、0/1790/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 60384-3-1 IEC:2006 3 The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives
33、, Part 2. The QC numbers that appear on the front cover of this publication are the specification numbers in the IEC Quality Assessment System for Electronic Components (IECQ). A list of all the parts of the IEC 60384 series, under the general title Fixed capacitors for use in electronic equipment,
34、can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be
35、reconfirmed; withdrawn; replaced by a revised edition; or amended. 4 60384-3-1 IEC:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 3: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ INTRODUCTION
36、Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in a
37、ccordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between square brackets on the first page of the detail specification correspond to the following
38、information, which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission” (IEC) or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number
39、of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short description of the type of
40、 capacitor. 6 Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed circuit board applications, this is clearly stated in the detail specification in this position. 7 Outline drawing with main dimensions which are of importance for intercha
41、ngeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment level. 9 Reference data on the most important properties, to allow c
42、omparison between the various capacitor types. 60384-3-1 IEC:2006 5 1 IEC 60384-3-1-XXX 2 QC 300801-XXX IEC 60384-3-1 4 QC 300801 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-3 3 SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID
43、ELECTROLYTE 5 6 OUTLINE DRAWING: (see Table 1) (first angle projection) 7 (Other shapes are permitted within the dimensions given.) ASSESSMENT LEVEL(S): EZ 8 NOTE For 1 to 9: see previous page. 9 Information on the availability of components qualified to this detail specification is given in the Qua
44、lified Products List. 1 General data 1.1 Recommended method of mounting (to be inserted) The capacitors are mounted by their terminations (see 1.3.2 and 4.3 of IEC 60384-3). 1.2 Dimensions Table 1 Case-size reference and dimensions Dimensions mm or inches and mm Case-size reference l h d When there
45、is no case-size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. 6 60384-3-1 IEC:2006 The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Capacitance range (see Table
46、 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Variation of capacitance with temperature (see Table 3) Tangent of loss angle Leakage current (see Table 3) Impedance (if applicable) (see Table 4) Equiva
47、lent series resistance (ESR) (if required) (see Table 5) Surge voltage Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltage aCase size Case size Case size Case size Rated capacitance (in F) aIf different from the rated voltage. 60384-3-1 IEC:2006 7 Table
48、3 Characteristics at high and low temperature Maximum values Capacitance change % Tangent of loss angle % Leakage current A U R V C R F T A T R T B T A 20 C T R T B 20 C T R T B aT A is the lower category temperature. T B is the upper category temperature. T R is the rated temperature. aMeasured wit
49、h the category voltage. Table 4 Impedance at 100 kHz (if required) Case size Impedance Table 5 Equivalent series resistance (ESR) at 100 kHZ (if required) Rated voltage U R V Rated capacitance F Maximum ESR m 8 60384-3-1 IEC:2006 1.4 Normative references IEC 60286-3, Packaging of components for automatic handling Part 3: Packaging of s
