1、 IEC 60454-3-11 Edition 2.0 2007-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and
2、 pressure-sensitive adhesive Rubans adhsifs sensibles la pression usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 11: Combinaisons de film polyester avec filament de verre, papier cellulosique crp, polyester non tiss, poxy et adhsif sensible la pression IEC 60454-3-11:20
3、07 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permissio
4、n in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for fur
5、ther information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Co
6、mit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +
7、41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and relat
8、ed technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The adva
9、nced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just P
10、ublished details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms
11、 in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de l
12、a CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la C
13、EI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (
14、numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Di
15、sponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues addit
16、ionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60454-3-11 Edition 2.0 2007-05 INTERNATIONAL STAN
17、DARD NORME INTERNATIONALE Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive Rubans adhsifs sensibles
18、la pression usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 11: Combinaisons de film polyester avec filament de verre, papier cellulosique crp, polyester non tiss, poxy et adhsif sensible la pression INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE I
19、NTERNATIONALE N ICS 29.035.20 PRICE CODE CODE PRIX ISBN 978-2-83220-339-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attentio
20、n! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60454-3-11 IEC:2007 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms and definitions . 6 4 Classification and designation . 7 5 Requirements . 8 6 Test methods 9 7 Marking, l
21、abelling and packaging 9 Table 1 Requirements for all types and combinations 10 Table 2 Polyester film/glass filament combinations; specific requirements for various types . 11 Table 3 Creped cellulosic paper/Polyester film combinations with thermosetting adhesive; specific requirements for various
22、types 12 Table 4 Polyester film/polyester non-woven combinations with rubber thermosetting adhesive; specific requirements for various types 13 Table 5 Polyester/epoxy combinations with pressure-sensitive adhesive; specific requirements for various types 14 60454-3-11 IEC:2007 3 INTERNATIONAL ELECTR
23、OTECHNICAL COMMISSION _ PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive FOREWORD 1) The Internation
24、al Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic
25、fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any
26、 IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standard
27、ization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repre
28、sentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
29、 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional public
30、ations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an
31、IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inj
32、ury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references
33、cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identi
34、fying any or all such patent rights. International Standard IEC 60454-3-11 has been prepared by IEC technical committee 15: Solid electrical insulating materials. This second edition of IEC 60454-3-11 replaces the first edition, published in 1998, as well as replacing IEC 60454-3-15 (2001), IEC 6045
35、4-3-16 (2003) and IEC 60454-3-17 (2001). It constitutes a technical revision. IEC 60454-3-15, IEC60454-3-16 and IEC 60454-3-17 are to be withdrawn at the time of this publication. The main changes with regard to the previous edition is the consolidation of Parts 3-11, 3-15, 3-16 and 3-17. 4 60454-3-
36、11 IEC:2007 This bilingual version (2012-09) corresponds to the monolingual English version, published in 2007-05. The text of this standard is based on the following documents: FDIS Report on voting 15/374/FDIS 15/383/RVD Full information on the voting for the approval of this standard can be found
37、 in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the mai
38、ntenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60454-3-11 IEC:2007 5 INTRODUCTION This International Standard is
39、 one of a series which deals with pressure-sensitive adhesive tapes, intended primarily for electrical purposes. The series consists of three parts: Part 1: General requirements (IEC 60454-1); Part 2: Methods of test (IEC 60454-2); Part 3: Specifications for individual materials (IEC 60454-3). This
40、standard contains one of the sheets comprising Part 3 as follows: Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive. SAFETY WARNING It is the responsibility of the user of the methods contained or referred t
41、o in this standard to ensure that they are used in a safe manner. 6 60454-3-11 IEC:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, e
42、poxy and pressure-sensitive adhesive 1 Scope This sheet of IEC 60454-3 contains the requirements for pressure-sensitive adhesive tapes, made with combined backings based on polyester film: PET film/glass filament combination tapes; Creped cellulosic paper/PET film combination tapes; PET film/polyest
43、er non-woven combination tapes; PET film/epoxy combination tapes. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performa
44、nce in that application, and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc
45、ument (including any amendments) applies. IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials. IEC 60454-1:1992, Specifications for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements. IEC 60454-2, Specification for pressur
46、e-sensitive adhesive tapes for electrical purposes Part 2: Methods of test 1IEC 60674-3-2:1992, Specification for plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used fo
47、r electrical insulation 3 Terms and definitions For the purposes of this document, refer to the definitions applicable to these materials in IEC 60454-1. _ 1A third edition of IEC 60454-2 is due to be published which will replace the current second edition dated 1998. 60454-3-11 IEC:2007 7 4 Classif
48、ication and designation The products supplied according to this standard shall be classified as follows: 4.1 Polyester film/glass filament combinations with pressure-sensitive adhesive Type 1: Products having properties characteristic of polyester film/glass filament combinations with a temperature
49、index of 130 with a rubber thermosetting adhesive, of nominal tape thickness (0,13 0,19) mm and a breaking strength of 280 N/10 mm minimum. Type 2: Products having properties characteristic of polyester film/glass filament combinations with a temperature index of 130 with a rubber thermosetting adhesive, of nominal tape thickness (0,18 0,25) mm and a breaking strengt
