1、 IEC 60695-9-2 Edition 1.0 2014-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fire hazard testing Part 9-2: Surface spread of flame Summary and relevance of test methods Essais relatifs aux risques du feu Partie 9-2: Propagation des flammes en surface Rsum et pertinence des mthodes dessai IEC 60695
2、-9-2:2014-03(en-fr) BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec
3、tronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please
4、contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y
5、compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit n
6、ational de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publi
7、shes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published.
8、IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - w
9、ww.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new
10、IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French
11、, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publicat
12、ions issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec
13、.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publ
14、ications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Sp
15、cifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, com
16、it dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une foi
17、s par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Elect
18、rotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publicat
19、ions des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60695-9-2 Edition 1.0 2014-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fire hazard testing
20、Part 9-2: Surface spread of flame Summary and relevance of test methods Essais relatifs aux risques du feu Partie 9-2: Propagation des flammes en surface Rsum et pertinence des mthodes dessai INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 13.220.40, 29.020
21、 PRICE CODE CODE PRIX ISBN 978-2-8322-1386-5 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an a
22、uthorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60695-9-2:2014 IEC:2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Summary of published test methods 11 4.1 Small-s
23、cale and intermediate-scale burning tests . 11 4.1.1 Horizontal and vertical 50 W and 500 W flame tests IEC 60695-11-10 and IEC 60695-11-20 11 4.1.2 Vertical burning test for cables IEC 60332-1 3 . 12 4.1.3 Vertical burning test for cables IEC 60332-2 4 . 13 4.1.4 Lateral flame spread on building an
24、d transport products ISO 5658-2 5 13 4.1.5 Intermediate scale test of vertical flame spread ISO 5658-4 8 . 14 4.1.6 Fire propagation apparatus, ISO 12136 9 . 15 4.1.7 Vertical burning test for aircraft materials FAR 25 19 . 16 4.1.8 Horizontal burning rate for road vehicle materials ISO 3795 20. 17
25、4.2 Large-scale burning tests . 17 4.2.1 General 17 4.2.2 Vertical burning tests for cables (ladder tests) 17 4.2.3 Vertical burning test for cables NF C 32-070 40 . 18 4.2.4 Vertical burning test for riser cables UL 1666 41 23 4.2.5 Horizontal flame spread test for cables EN 50289-4-11 and NFPA 262
26、 . 23 Annex A (informative) Repeatability and reproducibility data ISO 5658-2 25 Annex B (informative) Repeatability and reproducibility data ISO 5658-4 26 Annex C (informative) Repeatability and reproducibility data NFPA 262 27 Bibliography 28 Table 1 Summary and comparison of IEC 60332 vertical la
27、dder test methods 21 a)19 Table 2 Summary and comparison of non-IEC vertical ladder test methods 21 Table A.1 Interlaboratory test data for ISO 5658-2 . 25 Table B.1 Reproducibility and repeatability data for ISO 5658-4 . 26 Table C.1 Repeatability and reproducibility data for NFPA 262 27 IEC 60695-
28、9-2:2014 IEC:2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIRE HAZARD TESTING Part 9-2: Surface spread of flame Summary and relevance of test methods FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrot
29、echnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificati
30、ons, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International,
31、 governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal deci
32、sions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for inter
33、national use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In or
34、der to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cl
35、early indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification
36、 bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, pro
37、perty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in
38、 this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying an
39、y or all such patent rights. International Standard IEC 60695-9-2 has been prepared by IEC technical committee 89: Fire hazard testing. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This first edition cancels and replaces the second edition of
40、 IEC TS 60695-9-2 published in 2005. This edition constitutes a technical revision. The text of this standard is based on the following documents: FDIS Report on voting 89/1202/FDIS 89/1209/RVD Full information on the voting for the approval of this standard can be found in the report on voting indi
41、cated in the above table. 4 IEC 60695-9-2:2014 IEC:2014 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the 60695 series, under the general title Fire hazard testing, can be found on the IEC web site. This International standard is to b
42、e used in conjunction with IEC 60695-9-1. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be
43、reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60695-9-2:2014 IEC:2014 5 INTRODUCTION The risk of fire needs to be considered in any electrical circuit. The objective of component, circuit and equipment design, as well as the choice of materials, is to reduce the likelihood o
44、f fire, even in the event of foreseeable abnormal use, malfunction or failure. Electrotechnical products, primarily as victims of fire, may nevertheless contribute to the fire. Fire hazard increases as the burning area increases, leading in some cases to flashover and a fully developed fire. This is
45、 a typical fire scenario in buildings. It is therefore useful to measure the rate and extent of the surface spread of flame. This part of IEC 60695-9 describes surface spread of flame test methods in common use to assess electrotechnical products or materials used in electrotechnical products. It fo
46、rms part of the IEC 60695-9 series which gives guidance to product committees wishing to incorporate test methods for surface spread of flame in product standards. IEC 60695-9 consists of the following parts: Part 9-1: Surface spread of flame General guidance Part 9-2: Surface spread of flame Summar
47、y and relevance of test methods. 6 IEC 60695-9-2:2014 IEC:2014 FIRE HAZARD TESTING Part 9-2: Surface spread of flame Summary and relevance of test methods 1 Scope This part of IEC 60695 presents a summary of published test methods that are used to determine the surface spread of flame of electrotech
48、nical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use. The list of test methods is not to be considered exhaustive, and test methods that were not developed
49、 by IEC TC89 are not to be considered as endorsed by IEC TC89 unless this is specifically stated. This summary cannot be used in place of published standards which are the only valid reference documents. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC G