1、 IEC 61169-38 Edition 1.0 2008-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 38: Sectional specification Radio frequency coaxial connectors model, slide-in (rack and panel applications) Characteristic impedance 50 (type TMA) 50 applications Connecteurs pour frquences
2、 radiolectriques Partie 38: Spcification intermdiaire Connecteurs coaxiaux pour frquences radiolectriques, de type glissant (applications en panneau et fond de panier) Impdance caractristique 50 (type TMA) Applications 50 IEC 61169-38:2008-11(EN-FR) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright
3、2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National
4、Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf
5、 indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez
6、 des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-121
7、1 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content
8、 of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC
9、 International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technic
10、al committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electrope
11、dia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC
12、Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Se
13、rvice Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publi
14、e des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peu
15、t avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Re
16、cherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webs
17、tore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. I
18、l contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniqu
19、es, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cet
20、te publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61169-38 Edition 1.0 2008-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 38: Sectional specification Radio frequency coaxial connectors model, slide-in (rack and panel applications) Characteri
21、stic impedance 50 (type TMA) 50 applications Connecteurs pour frquences radiolectriques Partie 38: Spcification intermdiaire Connecteurs coaxiaux pour frquences radiolectriques, de type glissant (applications en panneau et fond de panier) Impdance caractristique 50 (type TMA) Applications 50 INTERNA
22、TIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 33.120.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1351-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you ob
23、tained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61169-38 IEC:2008 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 Mating face and gauge information . 7 3.1 Dimensions General con
24、nectors Grade 2 . 7 3.1.1 Connector with pin centre contact (see Figure 1) 7 3.1.2 Connectors with socket-centre contact (see Figure 2) . 8 3.2 Gauges . 9 3.2.1 Connectors with pin-centre contact 9 3.2.2 Connectors with socket-centre contact 10 3.3 Dimensions standard test connectors Grade 0 . 11 3.
25、3.1 Connector with pin-centre contact (see Figure 5) . 11 3.3.2 Connector with socket-centre contact (see Figure 6) . 12 3.4 General requirements for connector mounting in modules and on panels. 14 3.4.1 Radial misalignment 14 3.4.2 Axial misalignment . 14 4 Quality assessment procedure 15 4.1 Gener
26、al . 15 4.2 Rating and characteristics ( see Clause 6 of IEC 61169-1/QC220000) 15 4.3 Test schedule and inspection requirements . 18 4.3.1 Acceptance tests (see Table 8) 18 4.3.2 Periodic tests (see Table 9) . 19 4.4 Procedures 20 4.4.1 Quality conformance inspection . 20 4.4.2 Qualification approva
27、l and its maintenance 20 5 Instructions for preparation of detail specifications . 20 5.1 General . 20 5.2 Identification of the detail specification 21 5.3 Identification of the component 21 5.4 Performance 21 5.5 Marking, ordering information and related matters . 21 5.6 Selection of tests, test c
28、onditions and severities 22 5.7 Blank detail specification pro-forma for type TMA connector 23 Figure 1 Connector with pin-centre contact (for dimensions, see Table 1) 7 Figure 2 Connector with socket-centre contact (for dimensions, see Table 2) 8 Figure 3 Gauge for outer contact of pin connector (f
29、or dimensions, see Table 3) . 9 Figure 4 Gauge pin for socket-centre contact (for dimensions, see Table 4). 10 Figure 5 Standard test connector with pin-centre contact (for dimensions, see Table 5) . 11 Figure 6 Standard test connector with socket-centre contact (for dimensions, see Table 6) 12 Figu
30、re 7 The sketch map of connector radial misalignment 14 Figure 8 The sketch map of rigidly mounted and float-mounted connector 14 Table 1 Dimensions of connector with pin-centre contact . 7 61169-38 IEC:2008 3 Table 2 Dimensions of connector with socket-centre contact 8 Table 3 Dimensions of gauge f
31、or outer contact of pin connector 9 Table 4 Dimensions of gauge pin for socket-center contact 10 Table 5 Dimensions of standard test connector with pin-centre contact 11 Table 6 Dimensions of standard test connector with socket-centre contact 13 Table 7 Rating and characteristics . 15 Table 8 Accept
32、ance tests . 18 Table 9 Periodic tests 19 4 61169-38 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 38: Sectional specification Radio frequency coaxial connectors model, slide-in (rack and panel applications) Characteristic impedance 50 (type TMA) 50 application
33、s FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in t
34、he electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted
35、 to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Internatio
36、nal Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each
37、technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
38、Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their
39、 national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared
40、 to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Co
41、mmittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn
42、 to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not b
43、e held responsible for identifying any or all such patent rights. International Standard IEC 61169-38 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and acces
44、sories. This bilingual version (2014-01) corresponds to the monolingual English version, published in 2008-11. This standard cancels and replaces IEC/PAS 61169-38 published in 2007. 61169-38 IEC:2008 5 The text of this standard is based on the following documents: CDV Report on voting 46F/75/CDV 46F
45、/90/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all
46、parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in
47、the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the c
48、orrect understanding of its contents. Users should therefore print this document using a colour printer. 6 61169-38 IEC:2008 RADIO-FREQUENCY CONNECTORS Part 38: Sectional specification Radio frequency coaxial connectors model, slide-in (rack and panel applications) Characteristic impedance 50 (type
49、TMA) 50 applications 1 Scope This part of 61169, which is a sectional specification, provides information and rules for the preparation of detail specifications for series TMA r.f. connectors together with the pro forma blank detail specification. Series TMA connectors have a characteristic impedance of 50 and are norm
