1、 IEC 61169-42 Edition 1.0 2013-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors Connecteurs pour frquences radiolectriques Partie 42: Spcification intermdiaire pour connecteurs coaxiaux R.F. ver
2、rouillage rapide, srie CQN IEC 61169-42:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
3、 including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address b
4、elow or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie
5、 et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la C
6、EI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internat
7、ional Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links:
8、 IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpubli
9、shed Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and
10、definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please conta
11、ct the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des public
12、ations CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouv
13、er des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just
14、 Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais
15、, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.c
16、h. IEC 61169-42 Edition 1.0 2013-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors Connecteurs pour frquences radiolectriques Partie 42: Spcification intermdiaire pour connecteurs coaxiaux R.F. v
17、errouillage rapide, srie CQN INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 33.120.30 PRICE CODE CODE PRIX ISBN 978-2-83220-910-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internati
18、onale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 61169-42 IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative reference . 6
19、3 Mating face and gauge information . 6 Dimensions General connectors Grade 2 . 6 3.1Connector with pin-centre contact 6 3.1.1Connector with socket-centre contact 9 3.1.2Gauges . 9 3.2Gauge pins for socket-centre contact . 9 3.2.1Test procedure 10 3.2.2Dimensions- standard test connectors Grade 0. 1
20、1 3.3Connector with pin-centre contact 11 3.3.1Connector with socket-centre contact 13 3.3.2 4 Quality assessment procedure 14 General . 14 4.1Rating and characteristics (see Clause 6 of IEC 61169-1:1992) 14 4.2Test schedule and inspection requirements Acceptance tests . 17 4.3Acceptance tests . 17
21、4.3.1Periodic tests. 18 4.3.2Procedures 20 4.4Quality conformance inspection . 20 4.4.1Qualification approval and its maintenance 20 4.4.2 5 Instructions for preparation of detail specifications . 21 General . 21 5.1Identification of the component 21 5.2Performance 21 5.3Marking, ordering informatio
22、n and related matters . 21 5.4Selection of tests, test conditions and severities 21 5.5Blank detail specification pro-forma for type CQN connector . 23 5.6Figure 1 Connector with pin-centre contact 7 Figure 2 Connector with socket-centre contact . 9 Figure 3 Gauge pins for socket-centre contact . 9
23、Figure 4 Connector with pin-centre contact 11 Figure 5 Connector with socket-centre contact . 13 Table 1 Dimensions of connector with pin-centre contact . 8 Table 2 Dimensions of connector with socket-centre contact 10 Table 3 Dimensions of gauge pins for socket-centre contact 10 Table 4 Dimensions
24、of connector with pin-centre contact . 12 Table 5 Dimensions of connector with socket-centre contact 14 Table 6 Rating and characteristics . 15 Table 7 Acceptance tests . 17 Table 8 Periodic tests 18 61169-42 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 42:
25、Sectional specification for CQN series quick lock RF coaxial connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote inter
26、national co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafte
27、r referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also partici
28、pate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an i
29、nternational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all re
30、asonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply
31、IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of con
32、formity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this public
33、ation. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, o
34、r for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the corre
35、ct application of this publication. International Standard IEC 61169-42 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This first edition c
36、ancels and replaces the first edition of IEC/PAS 61169-42 published in 2009. This bilingual version (2013-06) corresponds to the monolingual English version, published in 2013-01. The text of this standard is based on the following documents: CDV Report on voting 46F/142/CDV 46F/165/RVC Full informa
37、tion on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 61169-42 IEC:2013 The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all
38、parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data
39、related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct un
40、derstanding of its contents. Users should therefore print this document using a colour printer. 61169-42 IEC:2013 5 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent conce
41、rning the design of these connectors given in Subclause 3.1. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and cond
42、itions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Mr. Qu jinliang Address: Room 302, Gudai road 126648,Ghanghai 201102 China (021-54148062). Shaanxi huada S&T CO., LTD Address: No.3
43、 Dianzixijie Electronic Indusrtrial Park, Xian P.R China HUADA is the trade name of Shaanxi huada S&T CO., LTD. This information is given for the information of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this pro
44、file does not require use of the trade name HUADA. Use of the trade name HUADA requires permission from Shaanxi huada S&T CO., LTD Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be
45、held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. 6 61169-
46、42 IEC:2013 RADIO-FREQUENCY CONNECTORS Part 42: Sectional specification for CQN series quick lock RF coaxial connectors 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for CQN series RF coaxial
47、connectors, with characteristic impedance of 50 , with threaded coupling and operating frequency limit up to 11 GHz, used in wireless, microwave, telecommunication, and other fields, connecting with RF cables or micro-strips. It also prescribes mating face dimensions for general connectors-grade 2,
48、dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to CQN series connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail
49、 specification and it covers test schedules and inspection requirements for assessment levels M and H (see Tables 8 and 9). 2 Normative reference The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i
