1、 IEC 61249-2-40 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Materials for printed boards and other interconnecting structures Part 2-40: Reinforced base materials, clad and unclad High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (ver
2、tical burning test), copper-clad for lead-free assembly Matriaux pour circuits imprims et autres structures dinterconnexion Partie 2-40: Matriaux de base renforcs, plaqus et non plaqus Feuilles stratifies en tissu de verre de type E poxyde non halogn haute performance, plaques cuivre, dinflammabilit
3、 dfinie (essai de combustion verticale), pour les assemblages sans plomb IEC61249-2-40:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
4、 means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publicat
5、ion, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou
6、mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou co
7、ntactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization tha
8、t prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might h
9、ave been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Publ
10、ished - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms conta
11、ining more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need
12、 further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologie
13、s apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La rech
14、erche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouve
15、lles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et df
16、initions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des q
17、uestions contactez-nous: csciec.ch. IEC 61249-2-40 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Materials for printed boards and other interconnecting structures Part 2-40: Reinforced base materials, clad and unclad High performance, non-halogenated epoxide woven E-glass laminate
18、sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly Matriaux pour circuits imprims et autres structures dinterconnexion Partie 2-40: Matriaux de base renforcs, plaqus et non plaqus Feuilles stratifies en tissu de verre de type E poxyde non halogn haute performa
19、nce, plaques cuivre, dinflammabilit dfinie (essai de combustion verticale), pour les assemblages sans plomb INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 31.180 PRICE CODE CODE PRIX ISBN 978-2-83220-493-1 Registered trademark of the International Electrot
20、echnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61249-2-40 IEC:2012 CONTENTS FORE
21、WORD . 4 1 Scope . 6 2 Normative references . 6 3 Materials and construction 6 3.1 General . 6 3.2 Resin system . 6 3.3 Metal foil . 7 3.4 Reinforcement . 7 4 Internal marking . 7 5 Electrical properties 7 6 Non-electrical properties of the copper-clad laminate . 8 6.1 Appearance of the copper-clad
22、sheet 8 6.1.1 General . 8 6.1.2 Indentations (pits and dents) . 8 6.1.3 Wrinkles 8 6.1.4 Scratches 8 6.1.5 Raised areas . 9 6.1.6 Surface waviness 9 6.2 Appearance of the unclad face 9 6.3 Laminate thickness 9 6.4 Bow and twist 10 6.5 Properties related to the copper foil bond 10 6.6 Punching and ma
23、chining . 11 6.7 Dimensional stability . 11 6.8 Sheet sizes . 12 6.8.1 Typical sheet sizes 12 6.8.2 Tolerances for sheet sizes . 12 6.9 Cut panels . 12 6.9.1 Cut panel sizes 12 6.9.2 Size tolerances for cut panels 12 6.9.3 Rectangularity of cut panels 12 7 Non-electrical properties of the base mater
24、ial after complete removal of the copper foil 13 7.1 Appearance of the dielectric base material 13 7.2 Flexural strength . 13 7.3 Flammability 13 7.4 Water absorption . 14 7.5 Measling 14 7.6 Glass transition temperature and cure factor . 15 7.7 Decomposition temperature . 15 7.8 Time to delaminatio
25、n . 15 7.9 Z-axis expansion . 15 8 Quality assurance . 16 8.1 Quality system . 16 8.2 Responsibility for inspection 16 8.3 Qualification inspection . 16 61249-2-40 IEC:2012 3 8.4 Quality conformance inspection . 16 8.5 Certificate of conformance . 16 8.6 Safety data sheet 17 9 Packaging and marking
26、17 10 Ordering information . 17 Annex A (informative) Engineering information 18 Annex B (informative) Common laminate constructions 20 Annex C (informative) Guideline for qualification and conformance inspection . 22 Bibliography 23 Table 1 Electrical properties 7 Table 2 Indentations 8 Table 3 Nom
27、inal thickness and tolerance of metal-clad laminate 9 Table 4 Bow and twist requirements . 10 Table 5 Pull-off and peel strength requirements . 10 Table 6 Dimensional stability . 11 Table 7 Size tolerances for cut panels . 12 Table 8 Rectangularity of cut panels 12 Table 9 Flexural strength requirem
28、ents 13 Table 10 Flammability requirements . 14 Table 11 Water absorption requirements 14 Table 12 Measling requirements 15 Table 13 Glass transition temperature and cure factor requirements 15 Table 14 Decomposition temperature requirements 15 Table 15 Time to delamination requirements 15 Table 16
29、Z-axis expansion requirements 16 Table B.1 Thickness 20 Table C.1 Qualification and conformance testing . 22 4 61249-2-40 IEC:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES Part 2-40: Reinforced base materials, clad and unclad High
30、performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechni
31、cal committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
32、Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, gove
33、rnmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions
34、or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internation
35、al use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to
36、 promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly
37、indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodie
38、s. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property
39、damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this
40、publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or a
41、ll such patent rights. International Standard IEC 61249-2-40 has been prepared by IEC technical committee 91: Electronics assembly technology. The text of this standard is based on the following documents: FDIS Report on voting 91/1053/FDIS 91/1066/RVD Full information on the voting for the approval
42、 of this standard can be found in the report on voting indicated in the above table. 61249-2-40 IEC:2012 5 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61249 series, under the general title Materials for printed boards and other
43、interconnecting structures, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the p
44、ublication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 61249-2-40 IEC:2012 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES Part 2-40: Reinforced base materials, clad and unclad High performance, non-halogenated epoxide woven E-glass laminate sheets
45、of defined flammability (vertical burning test), copper-clad for lead-free assembly 1 Scope This part of IEC 61249 specifies requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet of a thickness of 0,05 mm up to 3,2 mm, of defined flammability (vertical burning
46、 test), copper-clad. The glass transition temperature is defined to be 170 C minimum. Its flame resistance is defined in terms of the flammability requirements of 7.3. Some property requirements may have several classes of performance. The class desired should be specified on the purchase order, oth
47、erwise the default class of material will be supplied. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest
48、edition of the referenced document (including any amendments) applies. IEC 61189-2:2006, Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Test methods for materials and other interconnection structures IEC 61249-5-1:1995, Materials for
49、 interconnection structures Part 5: Sectional specification set for conductive foils and films with or without coatings Section 1: Copper foils (for the manufacture of copper-clad base materials) IEC/PAS 61249-6-3:2011, Specification for finished fabric woven from E-glass for printed boards ISO 11014:2009, Safety data sheet for chemical products Content and order of s
