1、 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE61300-2-51First editionPremire dition2007-06Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-51: Tests Fibre optic connector test for transmission with applied tensile load Singlemode and multimo
2、de Dispositifs dinterconnexion et composants passifs fibres optiques Mthodes fondamentales dessais et de mesures Partie 2-51: Essais Essai des connecteurs fibres optiques en transmission lorsquune charge de traction est applique Unimodal et multimodal Reference number Numro de rfrence IEC/CEI 61300-
3、2-51:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without pe
4、rmission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee
5、for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI o
6、u du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office
7、3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About I
8、EC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to
9、search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new pub
10、lications released. Available on-line and also by email. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax:
11、 +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu tec
12、hnique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des
13、recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtai
14、lle deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou c
15、ontactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE61300-2-51First editionPremire dition2007-06Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-51: Tests Fibre optic conne
16、ctor test for transmission with applied tensile load Singlemode and multimode Dispositifs dinterconnexion et composants passifs fibres optiques Mthodes fondamentales dessais et de mesures Partie 2-51: Essais Essai des connecteurs fibres optiques en transmission lorsquune charge de traction est appli
17、que Unimodal et multimodal H Commission Electrotechnique InternationaleInternational Electrotechnical Commission PRICE CODE CODE PRIX For price, see current cataloguePour prix, voir catalogue en vigueur 2 61300-2-51 IEC:2007 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references5 3 General description
18、.5 4 Apparatus.5 5 Procedure.7 5.1 General .7 5.2 Preparation of specimen 7 5.3 Preconditioning7 5.4 Initial measurements .7 5.5 Test method 7 5.6 Recovery.8 5.7 Final measurements 8 6 Details to be specified.8 Figure 1 Test apparatus for transmission with applied tensile load 6 Figure 2 Application
19、 of the load in the case of duplex cordage 6 Table 1 Preferred tensile loads and angles for transmission with applied load .7 61300-2-51 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES Part 2-51:
20、Tests Fibre optic connector test for transmission with applied tensile load Singlemode and multimode FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The obje
21、ct of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specificatio
22、ns (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaisi
23、ng with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express,
24、 as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees
25、 in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Co
26、mmittees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no markin
27、g procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants
28、or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, u
29、se of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that
30、 some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61300-2-51 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components,
31、 of IEC technical committee 86: Fibre optics The text of this standard is based on the following documents: FDIS Report on voting 86B/2510/FDIS 86B/2544/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This public
32、ation has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61300-2-51 IEC:2007 A list of all parts of the IEC 61300 series, published under the general title Fibre optic interconnecting devices and passive components Basic test and measurement procedures, can be found on the IEC web
33、site. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, rep
34、laced by a revised edition, or amended. _ NOTICE This document contains material that is Copyright 2006, Telcordia Technologies, Inc. (“Telcordia“). All rights reserved. The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use of said material in this
35、IEC document may differ from that of Telcordia. TELCORDIA MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION CONTAINED HEREIN. ANY USE OF OR RELIANCE UPON SAID INFORMATION OR OPINION IS AT THE RISK OF THE USER.
36、 TELCORDIA SHALL NOT BE LIABLE FOR ANY DAMAGE OR INJURY INCURRED BY ANY PERSON ARISING OUT OF THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION CONTAINED HEREIN. 61300-2-51 IEC:2007 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES P
37、art 2-51: Tests Fibre optic connector test for transmission with applied tensile load Singlemode and multimode 1 Scope This part of IEC 61300 describes a test to quantitatively assess the capability of fibre optic connector terminated fibre assemblies to withstand static tensile loads without uncoup
38、ling of the connector, physical damage to the assembly or degradation of optical performance. This test is intended to apply to fibre assemblies using any of the following: Media type 1: reinforced jacketed cordage of any diameter, Media type 2: cable with 900 m buffer coating that may or may not be
39、 reinforced or Media type 3: connectors terminating fibre with 250 m coating. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
40、renced document (including any amendments) applies. IEC 61300-1: Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance guidance IEC 61300-3-1, Fiber optic interconnecting devices and passive components Basic test and measurement
41、 procedures Part 3-1: Examinations and measurements Visual examination IEC 61300-3-6, Fiber optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return Loss IEC 61300-3-34, Fibre optic interconnecting devices and passive c
42、omponents - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors 3 General description Static loads are applied in this test to the fibre or cable of the terminated assembly while the mated connector assembly is held fixed by the a
43、dapter. The loads are applied in increments parallel to and at angles to the connector axis and held for a fixed time. The sample is measured for attenuation and return loss before application of the loads, during the application of the load at each combination of load and angle and at the end of th
44、e test after the sequence of load and angle combinations have been applied. 4 Apparatus The apparatus for this test is shown in Figure 1. Fibre/cable tension is applied with weights through a capstan. The patchcord is flexed at the point of entrance to the connector plug by rotating the test arm. Th
45、e position of the connector assembly along the test arm should be adjusted so that, when the arm is at 90, the centerline 6 61300-2-51 IEC:2007 along which the fibre/cable hangs, passes through the test point. The fixture is to be designed to allow the capstan to be rotated about the axis of the sec
46、tion of fibre/cable under tension. The bracket on which the adapter is mounted is to have provision for mounting the adapter at one of the three specified angles from 0 to 135 to the axis of the connector. For transmission with applied load, angle is 0, 90 and 135 (only 90 shown) Pivot point of test
47、 arm 20 cm-28 cm Test arm Connector GuidesWeights Capstan 7,5 cm Jumper cableIEC 955/07 Figure 1 Test apparatus for transmission with applied tensile load In the case of duplex cordage, the loads shall not be doubled and the cordage shall be bent in the minor axis direction as shown in Figure 2. Loa
48、d Duplex cordage IEC 954/07Figure 2 Application of the load in the case of duplex cordage 61300-2-51 IEC:2007 7 5 Procedure 5.1 General The following procedure shall be used in this test. The combinations of loads and angles to be applied at a rate of 5 N/s are those designated in the relevant speci
49、fication. If these are not specified, the preferred loads and angles given in Table 1 may be used. For small form factor connectors the preferred loads at the 90 and 135 tests are 2/3 those specified in Table 1. All optical measurements are made at singlemode 1 310 nm and 1 550 nm wavelengths and mu
