1、 IEC 61340-4-10 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrostatics Part 4-10: Standard test methods for specific applications Two-point resistance measurement lectrostatique Partie 4-10: Mthodes dessai normalises pour des applications spcifiques Mesure de la rsistance en
2、deux points IEC61340-4-10:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
3、microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC membe
4、r National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans lac
5、cord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence
6、. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all elec
7、trical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - w
8、ww.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all
9、new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and F
10、rench, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Cent
11、re: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu techni
12、que des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en u
13、tilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouve
14、lles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quiva
15、lents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61340-4-10 Edition 1.
16、0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrostatics Part 4-10: Standard test methods for specific applications Two-point resistance measurement lectrostatique Partie 4-10: Mthodes dessai normalises pour des applications spcifiques Mesure de la rsistance en deux points INTERNATIONAL
17、ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE L ICS 17.220.99; 29.020 PRICE CODE CODE PRIX ISBN 978-2-83220-488-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you o
18、btained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61340-4-10 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 General discussion . 5 4 Equipment 5 4.1 Probe 5 4.2 Sample s
19、upport surface . 7 4.3 Resistance measurement apparatus 7 4.4 Test leads . 8 4.5 Verification resistors 8 5 Sample preparation 9 6 Verification procedure 9 7 Test procedure . 10 8 Test results 10 Annex A (informative) Test method notes . 11 Figure 1 Two-point probe configuration 6 Figure 2 Probe to
20、instrumentation connection 8 Figure 3 Resistance verification fixture 9 Figure 4 Spring compression for measurement 10 Table 1 Material for two-point probe . 7 61340-4-10 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROSTATICS Part 4-10: Standard test methods for specific applications
21、Two-point resistance measurement FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions
22、concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”).
23、 Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborat
24、es closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the
25、 relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that
26、 the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the ma
27、ximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodie
28、s provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to I
29、EC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and e
30、xpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) A
31、ttention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61340-4-10 has been prepared by IEC technical committee 101: Electro
32、statics. The text of this standard is based on ANSI/ESD STM11.13-2004. It was submitted to the National Committees for voting under the Fast Track Procedure. The text of this standard is based on the following documents: FDIS Report on voting 101/368/FDIS 101/377/RVD Full information on the voting f
33、or the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61340-4-10 IEC:2012 The committee has decided that the contents of this publication will remain unchanged until t
34、he stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61340-4-10 IEC:2012 5 ELECTROSTATICS Part 4-10: Standard test method
35、s for specific applications Two-point resistance measurement 1 Scope This part of IEC 61340 provides a test method to measure the resistance between two points on an items surface. It is intended for measuring the resistance of items in the range of 104R1012. 2 Normative references The following doc
36、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ASTM D257-07, Standard T
37、est Methods for DC Resistance or Conductance of Insulating Materials ASTM D2240, Standard Test Method for Rubber Property Durometer Hardness 3 General discussion This method is recommended for testing items with irregularly shaped surfaces. Conventional concentric ring and parallel bar electrode con
38、figurations are used for testing planar items only. However, most packaging items are not planar. Examples include shipping tubes, trays, tote boxes and carrier tapes. This probe employs springs to apply consistent contact pressure between the electrode and the item. Force created by springs is subj
39、ect to variance from wear, contamination and manufacturing tolerance. This variance is acceptable for this application. Elastomeric electrodes compensate for uneven item surfaces. These features yield consistent results between laboratories and test operators. 4 Equipment 4.1 Probe Refer to Figure 1
40、 and Table 1. This two-point probe consists of an insulated metal body with a polytetrafluoroethylene (PTFE) insulator inserted into each end. One insulator holds test leads; the other holds receptacles that accept spring-loaded pins. One receptacle is surrounded by a cylindrical insulator, which is
41、 surrounded by a metal shield. The pins are gold plated and have a spring force of 4,56 N 10 % at a travel of 4,32 mm (0,170 in). The pin tips are machined to accept friction fitted 3,18 mm (0,125 in) diameter electrically conductive rubber electrodes. The rubber has a Shore A (IRHD) durometer hardn
42、ess of 50-70 (ASTM D2240). The electrodes are 3,18 mm (0,125 in) long. Electrode volume resistivity is 500 cm. 6 61340-4-10 IEC:2012 PTFE Insulator PTFE insulator Electrode insulator Pins Electrode shield Receptacles Electrodes Body Body insulator Leads Receptacles Electrode insulator Electrode shie
43、ld PTFE insulator Electrodes Pin 3,18 mm (0,125 in) Electrode dimensions Electrodes and pins Shielded electrode NOTE The probe body size and shape are not critical to the measurement and may be of any convenient shape and size Photo Probe parts Probe 3,18 mm (0,125 in) 3,18 mm (0,125 in) IEC 2129/12
44、 Figure 1 Two-point probe configuration Table 1 provides a list of the key components in Figure 1. 61340-4-10 IEC:2012 7 Table 1 Material for two-point probe Item Detail Example PTFE insulators Approximately 25,4 mm (1,0 in) by 12,7 mm (0,5 in) diameter Electrode shield Metal tubing approximately 31
45、,8 mm (1,25 in) by 4,75 mm (0,187 in) diameter Electrode insulator Heat shrinkable PTFE or other insulator Receptacles Receptacle with solder cup Interconnect devices Inc. R-5-SC Pins Spring pin force is 4,56 N at 4,32 mm (0,170 in) travel. Tip machined to accept electrode Interconnect devices Inc.
46、S-5-F-16.4-G Electrodes 3,18 mm (0,125 in) by 3,18 mm (0,125 in) diameter conductive material with a Shore A (IRHD) durometer hardness between 50 and 70. Volume resistivity to be 500 -cm. Vanguard products, VC-7815 NOTE This is not intended to be a complete materials list for probe construction, but
47、 does provide key elements that enable performance replication. Refer to Figure 1 for part placement. Part manufacturers and numbers information are for reference. Equivalent parts may be used. 4.2 Sample support surface An insulative surface, when used for specimen support, shall have a resistance
48、of greater than 1,0 1013 when measured in accordance with ASTM D257-07. 4.3 Resistance measurement apparatus The measurement apparatus, called the meter, whether it is a single meter or a collection of instruments, has the following capabilities: a) Meter for laboratory evaluations The meter shall h
49、ave an output voltage of 100 V (5 %) while under load for measurements of 1,0 106 and above, and 10 V (5 %) while under load for measurements less than 1,0 106. The meter shall be capable of making measurements from 1,0 103 (10 % accuracy) to 1,0 1013 (10 % accuracy). b) Meter for acceptance testing The laboratory evaluation meter may be used for acceptance testing or the fo
