1、 IEC 61340-4-7 Edition 2.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrostatics Part 4-7: Standard test methods for specific applications Ionization lectrostatique Partie 4-7: Mthodes dessai normalises pour des applications spcifiques Ionisation IEC 61340-4-7:2017-01(en-fr) THIS PUBLIC
2、ATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing f
3、rom either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further informati
4、on. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de
5、lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue
6、 de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About
7、 IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the en
8、tire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of cr
9、iteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online an
10、d also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical
11、Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CIS
12、PR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale
13、qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendu
14、m ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes
15、Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Ju
16、st Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniqu
17、es et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechn
18、iques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur
19、cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61340-4-7 Edition 2.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrostatics Part 4-7: Standard test methods for specific applications Ionization lectrostatique Partie 4-7: Mthodes dessai normalises pour des a
20、pplications spcifiques Ionisation INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 17.200.99; 29.020 ISBN 978-2-8322-3775-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warn
21、ing! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61340-4-7:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and defin
22、itions 7 4 Test fixture and instrumentation . 9 5 Specific requirements for equipment categories . 11 5.1 Specific requirements for all ionization equipment . 11 5.2 Room ionization 12 5.3 Laminar flow hood ionization . 14 5.4 Work surface ionization . 16 5.5 Compressed gas ionizers Guns and nozzles
23、 19 Annex A (informative) Theoretical background and additional information on the standard test method for the performance of ionizers 21 A.1 Introductory remarks . 21 A.2 Air ions . 21 A.3 Mobility and ion current . 21 A.4 Neutralization current 21 A.5 Neutralization rate 22 A.6 Ion depletion and
24、field suppression . 22 A.7 Charged plate monitor and charge neutralization 22 A.8 Relationship between charged plate monitor decay time and actual object 23 A.9 Offset voltage . 23 A.10 Preparation of test area 23 A.11 Ion transport in airflow 24 A.12 Obstruction of airflow around the charged plate
25、monitor 24 A.13 Effect of “air blanket” 24 A.14 Sources of measurement error 25 A.14.1 Typical decay time variability . 25 A.14.2 Plate isolation 25 A.14.3 Charging voltage . 25 A.14.4 Materials near the plate . 25 A.14.5 Other field-producing devices in test area 25 A.14.6 Effect of offset voltage
26、on decay time 25 A.15 Importance of ionization equipment maintenance 26 Annex B (normative) Method of measuring the capacitance of an isolated conductive plate . 27 B.1 Method . 27 B.2 Equipment 27 B.3 Procedure . 27 B.4 Example 27 B.5 Sources of error 28 B.5.1 Measuring equipment 28 B.5.2 Poor plat
27、e isolation 28 B.5.3 Objects in the environment 29 B.5.4 Stray capacitance 29 Annex C (informative) Safety considerations 30 IEC 61340-4-7:2017 IEC 2017 3 C.1 General . 30 C.2 Electrical . 30 C.3 Ozone . 30 C.4 Radioactive . 30 C.5 X-ray . 30 C.6 Installation 30 Bibliography 31 Figure 1 Charged plat
28、e monitor components for non-contacting plate measurement 10 Figure 2 Charged plate monitor components for contacting plate measurement . 10 Figure 3 Conductive plate detail for the non-contacting CPM . 11 Figure 4 Conductive plate detail for the voltage follower CPM 11 Figure 5 Test locations for r
29、oom ionization AC grids and DC bar systems . 13 Figure 6 Test locations for room ionization Single polarity emitter systems . 13 Figure 7 Test locations for room ionization Dual DC line systems 14 Figure 8 Test locations for room ionization Pulsed DC emitter systems . 14 Figure 9 Test locations for
30、vertical laminar flow hood Top view . 15 Figure 10 Test locations for vertical laminar flow hood Side view 15 Figure 11 Test locations for horizontal laminar flow hood Top view . 16 Figure 12 Test locations for horizontal laminar flow hood Side view 16 Figure 13 Test locations for benchtop ionizer T
31、op view . 17 Figure 14 Test locations for benchtop ionizer Side view 18 Figure 15 Test locations for overhead ionizer Top view . 18 Figure 16 Test locations for overhead ionizer Side view 19 Figure 17 Test locations for compressed gas ionizer (gun or nozzle) Side view . 20 Table 1 Test set-ups and t
32、est locations/points (TP) 12 Table B.1 Example measurement data . 28 4 IEC 61340-4-7:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROSTATICS Part 4-7: Standard test methods for specific applications Ionization FOREWORD 1) The International Electrotechnical Commission (IEC) is a worl
33、dwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other a
34、ctivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subj
35、ect dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions de
36、termined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Com
37、mittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in whi
38、ch they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publica
39、tion and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is no
40、t responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its techni
41、cal committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC P
42、ublications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject
43、 of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61340-4-7 has been prepared by IEC technical committee 101: Electrostatics. This second edition cancels and replaces the first edition, published in 2010, and constitutes a
44、technical revision. This edition includes the following significant technical changes with respect to the previous edition: the use of contacting plate voltage measurements in addition to the previous non- contacting plate voltage measurements has been added. Charged plate monitors (CPMs) using this
45、 technology have been in use in the industry for many years. IEC 61340-4-7:2017 IEC 2017 5 The text of this standard is also based on the following documents: FDIS Report on voting 101/521/FDIS 101/524/RVD Full information on the voting for the approval of this standard can be found in the report on
46、 voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61340 series, published under the general title Electrostatics, can be found on the IEC website. The committee has decided that the contents of th
47、is publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 61340-4-7:2017 IEC
48、2017 INTRODUCTION Grounding is the primary method used to limit static charge when protecting electrostatic discharge sensitive items in the work environment. However, grounding methods are not effective in removing static charges from the surfaces of non-conductive (insulative) or isolated conducti
49、ve materials. Air ionization techniques, by means of ionizer systems, can be utilized to reduce this charge. The preferred way of evaluating the ability of an ionizer to neutralize a static charge is to directly measure the rate of charge decay. Charges to be neutralized may be located on insulators as well as on isolated conductors. It is difficult to charge
