IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf

上传人:刘芸 文档编号:1236746 上传时间:2019-08-24 格式:PDF 页数:22 大小:462.29KB
下载 相关 举报
IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf_第1页
第1页 / 共22页
IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf_第2页
第2页 / 共22页
IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf_第3页
第3页 / 共22页
IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf_第4页
第4页 / 共22页
IEC 61755-2-2-2006 Fibre optic connector optical interfaces - Part 2-2 Optical interface standard single mode angled physically contacting fibres《纤维光学连接器光学接口.第2-2部分 标准物理角连接单模光纤的光学接口》.pdf_第5页
第5页 / 共22页
点击查看更多>>
资源描述

1、 NORME INTERNATIONALECEIIECINTERNATIONAL STANDARD 61755-2-2Premire ditionFirst edition2006-07Interfaces optiques de connecteurs pour fibres optiques Partie 2-2: Interfaces optiques pour fibres unimodales en contact physique avec angle Fibre optic connector optical interfaces Part 2-2: Optical interf

2、ace standard single mode angled physically contacting fibres Numro de rfrence Reference number CEI/IEC 61755-2-2:2006 Numrotation des publications Depuis le 1er janvier 1997, les publications de la CEI sont numrotes partir de 60000. Ainsi, la CEI 34-1 devient la CEI 60034-1. Editions consolides Les

3、versions consolides de certaines publications de la CEI incorporant les amendements sont disponibles. Par exemple, les numros ddition 1.0, 1.1 et 1.2 indiquent respectivement la publication de base, la publication de base incorporant lamendement 1, et la publication de base incorporant les amendemen

4、ts 1 et 2. Informations supplmentaires sur les publications de la CEI Le contenu technique des publications de la CEI est constamment revu par la CEI afin quil reflte ltat actuel de la technique. Des renseignements relatifs cette publication, y compris sa validit, sont dispo-nibles dans le Catalogue

5、 des publications de la CEI (voir ci-dessous) en plus des nouvelles ditions, amendements et corrigenda. Des informations sur les sujets ltude et lavancement des travaux entrepris par le comit dtudes qui a labor cette publication, ainsi que la liste des publications parues, sont galement disponibles

6、par lintermdiaire de: Site web de la CEI (www.iec.ch) Catalogue des publications de la CEI Le catalogue en ligne sur le site web de la CEI (www.iec.ch/searchpub) vous permet de faire des recherches en utilisant de nombreux critres, comprenant des recherches textuelles, par comit dtudes ou date de pu

7、blication. Des informations en ligne sont galement disponibles sur les nouvelles publications, les publications remplaces ou retires, ainsi que sur les corrigenda. IEC Just Published Ce rsum des dernires publications parues (www.iec.ch/online_news/justpub) est aussi dispo-nible par courrier lectroni

8、que. Veuillez prendre contact avec le Service client (voir ci-dessous) pour plus dinformations. Service clients Si vous avez des questions au sujet de cette publication ou avez besoin de renseignements supplmentaires, prenez contact avec le Service clients: Email: custserviec.ch Tl: +41 22 919 02 11

9、 Fax: +41 22 919 03 00 Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example,

10、 edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by

11、 the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideratio

12、n and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub)

13、 enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued

14、 publications (www.iec.ch/online_news/justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Cent

15、re: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 . NORME INTERNATIONALECEIIECINTERNATIONAL STANDARD 61755-2-2Premire ditionFirst edition2006-07Interfaces optiques de connecteurs pour fibres optiques Partie 2-2: Interfaces optiques pour fibres unimodales en contact physique avec

16、angle Fibre optic connector optical interfaces Part 2-2: Optical interface standard single mode angled physically contacting fibres Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2006 Droits de reproduction rservs Copyright - all rights reserved Aucune partie de cette publ

17、ication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanic

18、al, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch CODE PRIX PRIC

19、E CODE G Commission Electrotechnique InternationaleInternational Electrotechnical Commission 2 61755-2-2 CEI:2006 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ INTERFACES OPTIQUES DE CONNECTEURS POUR FIBRES OPTIQUES Partie 2-2: Interfaces optiques pour fibres unimodales en contact physique avec angle

20、AVANT-PROPOS 1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de norma

21、lisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“). Le

22、ur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOr

23、ganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn qu

24、e les Comits nationaux intresss sont reprsents dans chaque comit dtudes. 3) Les Publications de la CEI se prsentent sous la forme de recommandations internationales et sont agres comme telles par les Comits nationaux de la CEI. Tous les efforts raisonnables sont entrepris afin que la CEI sassure de

25、lexactitude du contenu technique de ses publications; la CEI ne peut pas tre tenue responsable de lventuelle mauvaise utilisation ou interprtation qui en est faite par un quelconque utilisateur final. 4) Dans le but dencourager lunification internationale, les Comits nationaux de la CEI sengagent ap

26、pliquer de faon transparente, dans toute la mesure possible, les normes internationales de la CEI dans leurs normes nationales et rgionales. Toutes divergences entre toutes Publications de la CEI et toutes publications nationales ou rgionales correspondantes doivent tre indiques en termes clairs dan

27、s ces dernires. 5) La CEI na prvu aucune procdure de marquage valant indication dapprobation et nengage pas sa responsabilit pour les quipements dclars conformes une de ses Publications. 6) Tous les utilisateurs doivent sassurer quils sont en possession de la dernire dition de cette publication. 7)

28、Aucune responsabilit ne doit tre impute la CEI, ses administrateurs, employs, auxiliaires ou mandataires, y compris ses experts particuliers et les membres de ses comits dtudes et des Comits nationaux de la CEI, pour tout prjudice caus en cas de dommages corporels et matriels, ou de tout autre domma

29、ge de quelque nature que ce soit, directe ou indirecte, ou pour supporter les cots (y compris les frais de justice) et les dpenses dcoulant de la publication ou de lutilisation de cette Publication de la CEI ou de toute autre Publication de la CEI, ou au crdit qui lui est accord. 8) Lattention est a

30、ttire sur les rfrences normatives cites dans cette publication. Lutilisation de publications rfrences est obligatoire pour une application correcte de la prsente publication. 9) Lattention est attire sur le fait que certains des lments de la prsente Publication de la CEI peuvent faire lobjet de droi

31、ts de proprit intellectuelle ou de droits analogues. La CEI ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et de ne pas avoir signal leur existence. La Norme internationale CEI 61755-2-2 a t tablie par le sous-comit 86B. Dispositifs dinterconnexion et compos

32、ants passifs fibres optiques, du comit dtudes 86 de la CEI: Fibres optiques. Le texte de cette norme est issu des documents suivants: FDIS Rapport de vote 86B/2317/FDIS 86B/2372/RVD Les rapports de vote indiqus dans le tableau ci-dessus donnent toute information sur le vote ayant abouti lapprobation

33、 de cette norme. Cette publication a t rdige selon les Directives ISO/CEI, Partie 2. 61755-2-2 IEC:2006 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC CONNECTOR OPTICAL INTERFACES Part 2-2: Optical interface standard single mode angled physically contacting fibres FOREWORD 1) The Internat

34、ional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electron

35、ic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees;

36、any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standa

37、rdization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has rep

38、resentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, I

39、EC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publ

40、ications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with a

41、n IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal i

42、njury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative reference

43、s cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for iden

44、tifying any or all such patent rights. International Standard IEC 61755-2-2 has been prepared by subcommittee 86B. Fibre optic interconnecting devices and passive components of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on vot

45、ing 86B/2317/FDIS 86B/2372/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2 4 61755-2-2 CEI:2006 Une liste de toutes les parties

46、de la srie CEI 61755, prsentes sous le titre gnral Interfaces optiques de connecteurs pour fibres optiques, peut tre consulte sur le site web de la CEI. Le comit a dcid que le contenu de cette publication ne sera pas modifi avant la date de maintenance indique sur le site web de la CEI sous http:/we

47、bstore.iec.ch dans les donnes relatives la publication recherche. A cette date, la publication sera reconduite; supprime; remplace par une dition rvise, ou amende. 61755-2-2 IEC:2006 5 A list of all parts of the IEC 61755 series, under the general title Fibre optic connector optical interfaces, can

48、be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 6 61755-2-2 CEI:2006 INTERFACES OPTIQUES DE CONNECTEURS POUR FIBRES OPTIQUES Partie 2-2: Interfaces optiques pour fibres unimodales en contact physique

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1