1、 IEC 62271-209Edition 1.0 2007-08INTERNATIONAL STANDARD NORME INTERNATIONALEHigh-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-termi
2、nations Appareillage haute tension Partie 209: Raccordement de cbles pour appareillage sous enveloppe mtallique isolation gazeuse de tension assigne suprieure 52 kV Cbles remplis dun fluide ou isolation extrude Extrmit de cble sche ou remplie dun fluide IEC62271-209:2007 THIS PUBLICATION IS COPYRIGH
3、T PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
4、 IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de rep
5、roduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays
6、du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Swi
7、tzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content
8、of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (refer
9、ence number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line
10、and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocab
11、ulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Com
12、mission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est const
13、amment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (
14、numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles public
15、ations parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additio
16、nnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email
17、: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62271-209Edition 1.0 2007-08INTERNATIONAL STANDARD NORME INTERNATIONALEHigh-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Fluid-filled and extruded
18、insulation cables Fluid-filled and dry-type cable-terminations Appareillage haute tension Partie 209: Raccordement de cbles pour appareillage sous enveloppe mtallique isolation gazeuse de tension assigne suprieure 52 kV Cbles remplis dun fluide ou isolation extrude Extrmit de cble sche ou remplie du
19、n fluide INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PICS 29.130.10 PRICE CODECODE PRIXISBN 2-8318-9242-2 2 62271-209 IEC:2007 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Terms and definitions .6 4 Limits of supply 7 4.1 General .7 4.2 Over-volt
20、age protection .7 5 Rating 7 5.1 General .7 5.2 Rated voltage7 5.3 Rated insulation level 8 5.4 Rated normal current and temperature rise8 5.5 Rated short-time and peak withstand currents and rated duration of short circuit 8 5.6 Rated filling pressure of insulating gas in the cable connection enclo
21、sure .8 6 Design and construction requirements9 6.1 Pressure withstand requirements.9 6.2 Mechanical forces on cable-terminations .9 7 Standard dimensions10 7.1 Fluid-filled cable-terminations10 7.2 Dry-type cable-terminations.10 7.3 Three-phase cable-termination enclosure10 8 Tests 10 8.1 General .
22、10 8.2 Dielectric type tests of cable-terminations .11 8.2.1 General .11 8.2.2 Dielectric type test of cable-terminations in a single phase enclosure 11 8.2.3 Dielectric type test of cable-termination in a three phase enclosure.11 8.3 Tests after cable system installation11 9 Information to be given
23、 with enquiries, tenders and orders .12 10 Rules for transport, storage, erection, operation and maintenance .12 Figure 1 Operating pressure of the gas insulation in the cable connection enclosure .9 Figure 2 Fluid-filled cable connection assembly Typical arrangement13 Figure 3 Fluid-filled cable co
24、nnection Assembly dimensions .14 Figure 4 Dry-type cable connection assembly Typical arrangement.15 Figure 5 Dry-type cable connection assembly Assembly dimensions.16 62271-209 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 209: Cable connections
25、for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-terminations FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
26、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe
27、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern
28、ational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form
29、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo
30、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4
31、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal
32、l be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liabi
33、lity shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (inclu
34、ding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of
35、this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62271-209 has been prepared by subcommittee 17
36、C: High-voltage switchgear and controlgear assemblies, of IEC technical committee 17: Switchgear and controlgear. This first edition of IEC 62271-209 cancels and replaces the second edition of IEC/TS 60859 and constitutes a technical revision. The changes from IEC/TS 60859 are as follows: the minimu
37、m voltage rating was changed from “72,5 kV” to ”above 52 kV”; the current rating was increased to 3150 A; 4 62271-209 IEC:2007 simplifications and modifications of the dimension tables in Figure 2 and Figure 4 such as diameters for 123 kV to 170 kV have been adopted in order to accommodate larger ca
38、ble cross-sections; new dimensions accept old terminations, new terminations may not meet old GIS standards; the following dimensions have been deleted: l1, l3 as well as note 3 on Figure 4; in Figure 4, new dimensions have been adopted for the voltage range from 245 kV to 300 kV, interchangeability
39、 for 245 kV to 300 kV is not maintained due to reduction in GIS cable termination housing; the lengths l7 and l8 have been modified; changes in the text in relation to minimum functional pressure for insulation pme(Table 1 has been removed); the limit of 170 kV for 3-phase application was deleted (S
40、ubclause 5.2); Figure 5 was deleted. The text of this standard is based on the following documents: FDIS Report on voting 17C/405/FDIS 17C/412/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has
41、been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 62271 series, under the general title High-voltage switchgear and controlgear, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged unt
42、il the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62271-209 IEC:2007 5 HIGH-VOLTAGE SWITCHGEAR AND CONTRO
43、LGEAR Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-terminations 1 Scope This standard covers the connection assembly of fluid-filled and extruded cables to gas-insula
44、ted metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable-terminations are fluid-filled or dry type and there is a separating insulating barrier between the cable insulation and the gas insulation of the switchgear. The purpose of this standard is to establish elect
45、rical and mechanical interchangeability between cable-terminations and the gas-insulated metal-enclosed switchgear and to determine the limits of supply. It complements and amends, if necessary, the relevant IEC standards. For the purpose of this standard the term “switchgear“ is used for “gas-insul
46、ated metal enclosed switchgear“. It does not cover directly immersed cable terminations, as described in CIGRE brochure 89. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For unda
47、ted references, the latest edition of the referenced document (including any amendments) applies. IEC 60038:1983, IEC standard voltages 1Amendment 1 (1994) Amendment 2 (1997) IEC 60141 (all parts), Tests on oil-filled and gas-pressure cables and their accessories IEC 60141-1:1993, Tests on oil-fille
48、d and gas-pressure cables and their accessories Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV IEC 60141-2:1963, Tests on oil-filled and gas-pressure cables and their accessories Part 2: Internal gas-pressure cables and
49、accessories for alternating voltages up to 275 kV IEC 60694:1996, Common specifications for high-voltage switchgear and controlgear standards IEC 60840:2004, Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um= 170 kV) Test methods and requirements 1There exists a conso
