1、 IEC 62317-2Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEFerrite cores Dimensions Part 2: Pot-cores for use in telecommunications, power supply, and filter applications Noyaux ferrites Dimensions Partie 2: Circuits magntiques en pots utiliss dans des applications de tlcommunications
2、, dalimentation lectrique et de filtre IEC62317-2:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, inc
3、luding photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below
4、 or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et
5、les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI d
6、e votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical,
7、 electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/search
8、pub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Jus
9、t Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent te
10、rms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Emai
11、l: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A pr
12、opos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-lig
13、ne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles pub
14、lications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions
15、 en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si
16、vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62317-2Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEFerrite cores Dimensions Part 2: Pot-cores for use in telecommunications, power supply,
17、and filter applications Noyaux ferrites Dimensions Partie 2: Circuits magntiques en pots utiliss dans des applications de tlcommunications, dalimentation lectrique et de filtre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE MICS 29.100.10 PRICE CODECODE PRIXISBN
18、 978-2-88912-005-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62317-2 IEC:2010 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Primary standards 5 3.1 Dimensions of pot-cores5 3.1.1 Principal dimensi
19、ons5 3.1.2 Wire-ways .7 3.1.3 Effective parameter values 8 3.2 Main dimensions for coil formers .9 Annex A (informative) Pot-core design.11 Annex B (informative) Example of a standard for gauges to check the dimensions of pot-cores meeting the IEC primary standard .12 Figure 1 Principal dimensions o
20、f pot-cores without back-wall slots.6 Figure 2 Principal dimensions of pot-cores with back-wall slots7 Figure 3 Main dimensions of coil formers for pot-cores 9 Figure B.1 Dimensions of gauge A .12 Figure B.2 Dimensions of gauges B and C .13 Table 1 Principal dimensions of pot-cores6 Table 2 Limits f
21、or dimensions C and G .7 Table 3 Minimum wire-way depth .8 Table 4 Effective parameter values pot-cores with a centre hole 8 Table 5 Effective parameter values pot-cores without a centre hole .9 Table 6 Main dimensions of coil formers for pot-cores10 Table A.1 Ratio of diameter to height.11 Table B.
22、1 Dimensions of gauge A 12 Table B.2 Dimensions of gauges B and C 13 62317-2 IEC:2010 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FERRITE CORES DIMENSIONS Part 2: Pot-cores for use in telecommunications, power supply, and filter applications FOREWORD 1) The International Electrotechnical Commissio
23、n (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in ad
24、dition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee inter
25、ested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance wi
26、th conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested
27、IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible fo
28、r the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between
29、 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of confo
30、rmity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and membe
31、rs of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or
32、 any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication ma
33、y be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62317-2 has been prepared by technical committee 51: Magnetic components and ferrite materials. According to IEC 62317-1 clause 3-b) and Table A.1 in Annex A
34、, the publication number of IEC 60133 should be updated to IEC 62317-2 at the time of new revision of this standard. This first edition cancels and replaces the fourth edition of IEC 60133 published in 2000. This International Standard constitutes a technical revision of IEC 60133. The main changes
35、with respect to the previous edition of IEC 60133 are listed below: changed “e dimension” of P4,6/3,1 in Table 6 from 3,20 Max. to 3,40 Max.; removed “derived standards” from Annex B (informative) in the fourth edition of IEC 60133; 4 62317-2 IEC:2010 changed the name of core parts in Subclause 3.1.
36、2 from “Grooves” to “Wire-ways” in accordance with IEC 62317-1 Subclause 5.6. The text of this standard is based on the following documents: FDIS Report on voting 51/980/FDIS 51/982/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in
37、 the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62317 series, under the general title Ferrite coresDimensions, can be found on the IEC website. The committee has decided that the contents of this publication will r
38、emain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62317-2 IEC:2010 5 FERRITE CORES DIMENSIONS P
39、art 2: Pot-cores for use in telecommunications, power supply, and filter applications 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be
40、 used with them. The selection of core sizes for this standard is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting cor
41、e sizes to be included. The general considerations upon which the design of this range of cores is based are given in Annex A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For u
42、ndated references, the latest edition of the referenced document (including any amendments) applies. IEC 60205, Calculation of the effective parameters of magnetic piece parts IEC 62317-1, Ferrite cores Dimensions Part 1: General specification 3 Primary standards 3.1 Dimensions of pot-cores Complian
43、ce with the following requirements ensures mechanical interchangeability of complete assemblies and wound coil formers. 3.1.1 Principal dimensions The principal dimensions of pot-cores shall be as given in Table 1, Figure 1 and Figure 2. 6 62317-2 IEC:2010 Table 1 Principal dimensions of pot-cores D
44、imensions in millimetres A E F H 2B 2D r1aSize Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Max. Figures P3,3/2,6 3,18 3,30 2,50 2,60 1,30 1,40 2,50 2,60 1,70 1,90 0,20 1 P4,6/3,1 4,40 4,60 3,50 3,65 1,90 2,00 3,00 3,10 2,10 2,30 0,20 1 P5,8/3,3 5,65 5,80 4,50 4,60 2,40 2,50 0,95 1,05
45、 3,20 3,30 2,20 2,40 0,20 1 P7,4/4,0 7,15 7,35 5,80 5,95 2,95 3,00 1,05 1,15 4,10 4,20 2,80 3,00 0,20 1 P9/5 9,00 9,30 7,50 7,75 3,70 3,90 2,00 2,20 5,10 5,40 3,60 3,90 0,25 2 P11/7 10,9 11,3 9,00 9,40 4,50 4,70 2,00 2,20 6,30 6,60 4,40 4,70 0,25 2 P14/8 13,8 14,3 11,6 12,0 5,80 6,00 3,00 3,20 8,20
46、8,50 5,60 6,00 0,25 2 P18/11 17,6 18,4 14,9 15,4 7,30 7,60 3,00 3,20 10,4 10,7 7,20 7,60 0,25 2 P22/13 21,2 22,0 17,9 18,5 9,10 9,40 4,40 4,70 13,2 13,6 9,20 9,60 0,35 2 P26/16 25,0 26,0 21,2 22,0 11,1 11,5 5,40 5,70 15,9 16,3 11,0 11,4 0,35 2 P30/19 29,5 30,5 25,0 25,8 13,1 13,5 5,40 5,70 18,6 19,0
47、 13,0 13,4 0,35 2 P36/22 35,0 36,2 29,9 30,9 15,6 16,2 5,40 5,70 21,4 22,0 14,6 15,0 0,35 2 NOTE P3,3/2,6 and P4,6/3,1 cores are without the centre hole shown in Figure 1. aSharp inner corners of pot-cores are preferable but in practice some rounding may occur, provided that radius r1is not exceeded
48、. X Section X-X G A EfH 2B2Dr1X F IEC 1378/10 Figure 1 Principal dimensions of pot-cores without back-wall slots 62317-2 IEC:2010 7 C G A EF H 2B 2D r1X X Section X-X IEC 1379/10 Figure 2 Principal dimensions of pot-cores with back-wall slots NOTE The dimensions of the cores may be checked by means
49、of gauges. By way of example, a possible standard for these gauges is given in Annex B. In order to facilitate production it may be necessary to use gauges having dimensions differing from those given in Annex B, although no relaxation of the requirements for the dimensions of the cores given in Table 1 and in Table 2 is permitted. Table 2 Limits for
