C0000500_374 Trimmed Sizes of Writing and Printing Paper《纸张尺度（裁切后）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

Q GDW 567-2010 配电自动化系统验收技术规范及编制说明.pdf

Q GDW 719-2012 审计综合管理系统编码规范及编制说明.pdf

Q GDW 550-2010 输电线路降低可听噪声设计和建设导则及编制说明.pdf

Q GDW 551-2010 变电站控制电晕噪声技术导则（导体金具） 及编制说明.pdf

Q GDW 705-2012 输电线路钢管塔用法兰及编制说明.pdf

Q GDW 706-2012 输电铁塔用热轧大规格等边角钢及编制说明.pdf

Q GDW 707-2012 输电线路钢管塔薄壁管对接焊缝超声波检验及质量评定及编制说明.pdf

Q GDW 708-2012 输电杆塔高强钢焊接及热加工技术规程及编制说明.pdf

Q GDW 709-2012 输电线路铁塔组立专用塔式起重机通用技术条件及编制说明.pdf