C0010500_952 Scheduled Information to be Given on Enquiring and Ordering of Electric Machines (Medium and Small Size A.C Synchronous Motors)《询价与订购电机应开列之条款（中小型同步电动机）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 7294-2-2003 General tolerances Part 2 Geometrical tolerances for features without individual tolerance indications《一般公差 第2部分 未单独标注公差特性的几何公差》.pdf

TCVN 7295-2003 Geometrical product specification (GPS) Geometrical tolerancing Positional tolerancing《产品几何技术规范(GPS) 几何公差 位置公差》.pdf

TCVN 7296-2003 Welding General tolerances for welded constructions Dimensions for lengths and angles Shape and position《焊接 焊接结构的通用公差 长度和角度尺寸 形状和位置》.pdf

TCVN 7297-2003 Castings System of dimensional tolerances and machining allowances《铸件 尺寸公差和加工余量系统》.pdf

TCVN 7298-2003 Guide to choice of series of preferred numbers and of series containing more rounded values of preferred numbers《优先数和优先数化整值系列的选用指南》.pdf

TCVN 7299-2003 Guide to the use of preferred numbers and of series of preferrd numbers《优先数和优先数系的使用指南》.pdf

TCVN 7300-2003 Safety of machinery Prevention of unexpected start-up《机械安全 防止意外启动》.pdf

TCVN 7301-1-2008 Safety of machinery Risk assessment Part 1 Principles《机械安全 风险评估 第1部分 原则》.pdf

TCVN 7301-2-2008 Safety of machinery Risk assessment Part 2 Practical guidance and examples of methods《机械安全 风险评估 第2部分 使用指南和方法例证》.pdf