C0090100_459 Enamel Lamp Shape《搪瓷灯罩（适用于螺纹式灯头）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ASTM D2683-2014 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing.pdf

ANSI ASTM D2686-2006 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape《聚四氟乙烯背面压敏电绝缘胶带的规范》.pdf

ANSI ASTM D2729-2011 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings《聚氯乙烯(PVC)污水管及管配件规格》.pdf

ANSI ASTM D2737 REV A-2012 Standard Specification for Polyethylene (PE) Plastic Tubing.pdf

ANSI ASTM D2749-2013 Standard Symbols for Dimensions of Plastic Pipe Fittings《塑料管配件的尺寸表示符号》.pdf

ANSI ASTM D2756-2007 Standard Test Method for Weight Loss of Electrical Insulating Varnishes《电绝缘清漆的重量损失用试验方法》.pdf

ANSI ASTM D2774-2012 Standard Practice for Underground Installation of Thermoplastic Pressure Piping《热塑压力管地下安装用实施规程》.pdf

ANSI ASTM D2837-2013 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products《获得热塑性塑料管材.pdf

ANSI ASTM D2846 D2846M REV B-2017 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems.pdf