C0170900_809 Eriochrome Black T [ 1-(1-Hydroxy-2-Naphthylazo)-6-Nitro-2-Naphthol-4-Sulfonic Acid Sodium Salt ]《化学试药（毛染铬黑Ｔ）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

UNI 7002-1971 Measuring instruments Not go screw gauging members with profil with truncated flanks and collet for ISO metric threads with nominal diameter above 50 to 100 mm 《测量工具 .pdf

UNI 7003-1971 Measuring instruments Not go screw gauging members with profil with truncated flanks and collet for ISO metric threads with nominal diameter above 50 to 100 mm 《测量工具 .pdf

UNI 7004-1971 Measuring instruments Screw gauging members with complete flanks (one half) and truncated flanks (one half) and collet for ISO metric threads with nominal diameter ab.pdf

UNI 7005-1971 Measuring instruments Go gauging members with taper shaft for nominal sizes above 1 5 to 50 mm 《测量工具 标称尺寸超过1 5－50mm 的带圆锥手柄连接的过端光滑校准工具》.pdf

UNI 7006-1971 Measuring instruments Not go gauging members with taper shaft for nominal sizes above 1 5 to 50 mm 《测量工具 标称尺寸超过1 5－50mm 的带圆锥手柄连接光滑不过端校准工具》.pdf

UNI 7007-1971 Measuring instruments Go and not go gauging members with collet for nominal sizes above 50 to 100 mm 《测量工具 标称尺寸超过50－100mm 的带轴套连接的光滑不过端校准工具》.pdf

UNI 7008-1971 Measuring instruments Handles for gauging members with taper shaft 《测量工具 带圆锥形连接手柄的端校准工具用曲柄》.pdf

UNI 7009-1971 Measuring instruments Handles and screw for gauging members with collet 《测量工具 带轴套连接的端校准用曲柄和螺钉》.pdf

UNI 7010-1971 Measuring instruments Gauges and check and setting gauges for ISO metric threads Distintion signs indications and check and their position on gauges and check and set.pdf