DB65 T 2857-2008 Construction regulation for sunlight greenhouse(Steel Framework) in the east of Xinjiang《东南疆地区节能日光温室（全钢骨架）建造规程》.pdf

相关资源

NY T 1553-2007 日光温室能效评价规范.pdf

JB T 10286-2001 日光温室结构.pdf

DB12 T 554-2015 日光温室黄瓜智能灌溉技术规程.pdf

DB12 T 583-2015 日光温室辣椒栽培水肥一体化技术规范.pdf

DB12 T 567-2015 日光温室春番茄—秋芹菜栽培模式技术规范.pdf

DB12 T 568-2015 日光温室冬春番茄套种生菜—秋黄瓜栽培模式技术规范.pdf

NY T 3024-2016 日光温室建设标准.pdf

NY T 610-2016 日光温室 质量评价技术规范.pdf

DB11 T 291-2005 日光温室建造规范.pdf

DB11 T 550-2008 日光温室用电动卷帘机技术条件.pdf

猜你喜欢

GOST 24961-1981 Plate double-end plug gauges with diameter from 14 to 98 mm Design and dimensions《直径 14mm～98mm双头板塞规 结构及尺寸》.pdf

GOST 24962-1981 Go plug gauges of not full form with diameter from 102 to 125 mm Design and dimensions《直径 102mm～125mm不完整通端塞规 结构及尺寸》.pdf

GOST 24963-1981 Not-go plug gauges of not full form with diameter from 102 to 125 mm Design and dimensions《直径 102mm～125mm不完整止端塞规 结构及尺寸》.pdf

GOST 24964-1981 Not-go snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by D or b Design and dimensions《直齿花键轴按D或b定心时内径检验用止端卡规.pdf

GOST 24965-1981 Double-end snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by d Design and dimensions《直齿花键轴按d定心时内径检验用双面卡规 结构.pdf

GOST 24966-1981 Double-end snap-gauges for checking tooth thickness of splined shafts with straight-sided profile Design and dimensions《直齿花键轴齿厚度检验用双头卡规 结构及尺寸》.pdf

GOST 24967-1981 Splined gauges for dimensions up to 3 mm Design and dimensions《尺寸 3mm槽量规 结构及尺寸》.pdf

GOST 24968-1981 Splined gauges for dimensions over 3 to 18 mm Design and dimensions《尺寸 3mm槽量规 结构及尺寸》.pdf

GOST 24969-1981 Gauges for checking 30 involute splined joints Tolerances《齿形30角花键连接检验用量规 公差》.pdf