1、 IEC 60317-48 Edition 2.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 Spcifications pour types particuliers de fils de bobi
2、nage Partie 48: Fil de section circulaire en cuivre nu ou maill, recouvert dun guipage de fibres de verre imprgnes de rsine ou de vernis, indice de temprature 155 IEC 60317-48:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise s
3、pecified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions
4、about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre
5、 reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obten
6、ir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC T
7、he International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC
8、. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,).
9、It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.elect
10、ropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Cent
11、re - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des No
12、rmes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut
13、avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces o
14、u retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en lig
15、ne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/cs
16、c Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60317-48 Edition 2.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish i
17、mpregnated, bare or enamelled round copper wire, temperature index 155 Spcifications pour types particuliers de fils de bobinage Partie 48: Fil de section circulaire en cuivre nu ou maill, recouvert dun guipage de fibres de verre imprgnes de rsine ou de vernis, indice de temprature 155 INTERNATIONAL
18、 ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS 29.060.10 PRICE CODE CODE PRIX ISBN 978-2-83220-217-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained
19、 this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60317-48 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.
20、1 Terms and definitions 6 3.2 General notes 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance . 7 4 Dimensions . 7 5 Electrical resistance 7 6 Elongation 7 7 Springiness . 7 8 Flexibility and adherence 7 9 Heat shock . 7 10 Cut-through 7 11 Resistance to abrasion . 7 12 Resistance to sol
21、vents 7 13 Breakdown voltage . 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants . 8 17 Solderability 8 18 Heat or solvent bonding 8 19 Dielectric dissipation factor . 8 20 Resistance to hydrolysis and to transformer oil 8 21 Loss of mass 8 23 Pin hole test . 8 30
22、Packaging. 8 Bibliography 9 60317-48 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 FOREWORD 1) The International Electrote
23、chnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To t
24、his end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nationa
25、l Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO
26、) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fr
27、om all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be h
28、eld responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any
29、divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to
30、IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual
31、 experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this
32、IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this
33、IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-48 has been prepared by IEC technical committee 55: Winding wires. This second edition cancels and replaces the first edition, publis
34、hed in 1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: new subclause containing general notes on winding wire, formerly part of the scope; new subclause containing requirements for appearance
35、; new Clause 23, Pin hole test. 4 60317-48 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 55/1326/FDIS 55/1341/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This p
36、ublication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be read in conjunction with IEC 60317-0-6:2001 and its Amendment 1:2006. The numbering of clauses in this standard is not continuous from Clauses 20 and 30 in order to reserve space for p
37、ossible future wire requirements prior to those for wire packaging. A list of all the parts in the IEC 60317 series, published under the general title Specifications for particular types of winding wires can be found on the IEC website. The committee has decided that the contents of this publication
38、 will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60317-48 IEC:2012 5 INTRODUCTION This
39、part of IEC 60317 is one of a series which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) Winding wires Test methods (IEC 60851); 2) Specifications for particular types of winding wires (IEC 60317); 3) Packaging of winding wires (IEC
40、60264). 6 60317-48 IEC:2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 1 Scope This part of IEC 60317 specifies requirements of glass-fibre wound resin or varnish impregnated
41、, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 155. The impregnating agent can be, for instance, polyester or polyesterimide resin based. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established.
42、Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only
43、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60317-0-6:2001, Specifications for particular types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish impregnated, bare or enamel
44、led round copper wire Amendment 1:2006 3 Terms, definitions, general notes and appearance 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in 3.1 of IEC 60317-0-6: 2001 and its Amendment 1:2006 apply. 3.2 General notes 3.2.1 Methods of test Subclause 3.2 o
45、f IEC 60317-0-6:2001 applies. In case of inconsistency between IEC 60317-0-6 and this standard, IEC 60317-48 shall prevail. 3.2.2 Winding wire The enamelled wire shall have a temperature index of at least 155, and shall be agreed between purchaser and supplier. The temperature index of the wire is d
46、ependent upon the type of impregnating agent used. The impregnating agent applied to the glass-fibre shall have a minimum temperature index of 155. 60317-48 IEC:2012 7 The glass-fibre covering may be a) a single layer of glass-fibre, b) a double layer of glass-fibre, with one layer applied in the di
47、rection opposite to that of the other layer. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-6:2001. 3.3 Appearance Subclause 3.3 of IEC 60317-0-6:2001, Amendment 1:2006 applies. 4 Dimensions Clause 4 of IEC 60317-0-6:2001 applies. 5 Electrical resistance Clause 5 of IEC 603
48、17-0-6:2001 applies. 6 Elongation Clause 6 of IEC 60317-0-6:2001 applies. 7 Springiness Clause 7 of IEC 60317-0-6:2001 applies. 8 Flexibility and adherence Clause 8 of IEC 60317-0-6:2001 applies. 9 Heat shock Test inappropriate. 10 Cut-through Test inappropriate. 11 Resistance to abrasion Test inapp
49、ropriate. 12 Resistance to solvents Test inappropriate. 8 60317-48 IEC:2012 13 Breakdown voltage Clause 13 of IEC 60317-0-6:2001 applies. 14 Continuity of insulation Test inappropriate. 15 Temperature index Clause 15 of IEC 60317-0-6:2001 applies. 16 Resistance to refrigerants Test inappropriate. 17 Solderability Test inappropriate. 18 Heat or solvent bonding Test inappropriate. 19 Dielectric dissipation factor Test in
