1、 IEC 60384-22 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 22: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Condensateurs fixes utiliss dans les quipements lectroniques Partie
2、 22: Spcification intermdiaire Condensateurs multicouches fixes dilectriques en cramique pour montage en surface, de Classe 2 IEC60384-22:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry
4、 about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque fo
5、rme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette
6、 publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading glo
7、bal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Pu
9、blished: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms con
10、taining more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or n
11、eed further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationale
12、s pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Cata
13、logue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces
14、 Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au mon
15、de de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custs
16、erv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60384-22 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATION
17、ALE Fixed capacitors for use in electronic equipment Part 22: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Condensateurs fixes utiliss dans les quipements lectroniques Partie 22: Spcification intermdiaire Condensateurs multicouches fixes dilectriqu
18、es en cramique pour montage en surface, de Classe 2 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 31.060.10 PRICE CODE CODE PRIX ISBN 978-2-88912-821-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele
19、ctrotechnique Internationale 2 60384-22 IEC:2011 CONTENTS FOREWORD . 6 1 General 8 1.1 Scope 8 1.2 Object . 8 1.3 Normative references 8 1.4 Information to be given in a detail specification . 8 1.4.1 Outline drawing and dimensions 9 1.4.2 Mounting . 9 1.4.3 Rating and characteristics . 9 1.4.4 Mark
20、ing . 10 1.5 Terms and definitions 10 1.6 Marking . 10 1.6.1 Information for marking 11 1.6.2 Marking on the body 11 1.6.3 Requirements for marking 11 1.6.4 Marking of the packaging . 11 1.6.5 Additional marking . 11 2 Preferred rating and characteristics 11 2.1 Preferred characteristics . 11 2.1.1
21、Preferred climatic categories . 11 2.2 Preferred values of ratings 12 2.2.1 Rated temperature (TR) . 12 2.2.2 Rated voltage (UR) 12 2.2.3 Category voltage (UC) . 12 2.2.4 Preferred values of nominal capacitance and associated tolerance values . 12 2.2.5 Temperature characteristic of capacitance . 13
22、 2.2.6 Dimensions . 14 3 Quality assessment procedures 14 3.1 Primary stage of manufacture 14 3.2 Structurally similar components . 14 3.3 Certified records of released lots . 14 3.4 Qualification approval 14 3.4.1 Qualification approval on the basis of the fixed sample size procedures 14 3.4.2 Test
23、s . 15 3.5 Quality conformance inspection . 20 3.5.1 Formation of inspection lots . 20 3.5.2 Test schedule 20 3.5.3 Delayed delivery 20 3.5.4 Assessment levels . 20 4 Test and measurement procedures . 22 4.1 Special preconditioning . 22 4.2 Measuring conditions 22 4.3 Mounting . 22 4.4 Visual examin
24、ation and check of dimensions . 22 4.4.1 Visual examination 22 60384-22 IEC:2011 3 4.4.2 Requirements 22 4.5 Electrical tests . 24 4.5.1 Capacitance 24 4.5.2 Tangent of loss angle (tan ) . 25 4.5.3 Insulation resistance 25 4.5.4 Voltage proof . 26 4.5.5 Impedance (if required by the detail specifica
25、tion) . 27 4.5.6 Equivalent series resistance ESR (if required by the detail specification) . 27 4.6 Temperature characteristic of capacitance 27 4.6.1 Special preconditioning . 27 4.6.2 Measuring conditions . 27 4.6.3 Requirements 28 4.7 Shear test . 28 4.8 Substrate bending test 28 4.8.1 Initial m
26、easurement . 28 4.8.2 Final inspection . 28 4.9 Resistance to soldering heat . 29 4.9.1 Special preconditioning . 29 4.9.2 Initial measurement . 29 4.9.3 Test conditions 29 4.9.4 Recovery . 30 4.9.5 Final inspection, measurements and requirements 30 4.10 Solderability 31 4.10.1 Test conditions 31 4.
27、10.2 Recovery . 32 4.10.3 Final inspection, measurements and requirements 32 4.11 Rapid change of temperature 32 4.11.1 Special preconditioning . 32 4.11.2 Initial measurement . 32 4.11.3 Number of cycles . 32 4.11.4 Recovery . 32 4.11.5 Final inspection, measurements and requirements 32 4.12 Climat
28、ic sequence . 33 4.12.1 Special preconditioning . 33 4.12.2 Initial measurement . 33 4.12.3 Dry heat 33 4.12.4 Damp heat, cyclic, Test Db, first cycle . 33 4.12.5 Cold 33 4.12.6 Damp heat, cyclic, Test Db, remaining cycles 33 4.12.7 Final inspection, measurements and requirements 34 4.13 Damp heat,
29、steady state 34 4.13.1 Special preconditioning . 34 4.13.2 Initial measurement . 34 4.13.3 Conditions of test 34 4.13.4 Recovery . 35 4.13.5 Final inspection, measurements and requirements 35 4.14 Endurance . 35 4.14.1 Special preconditioning . 35 4 60384-22 IEC:2011 4.14.2 Initial measurement . 36
30、4.14.3 Conditions of test 36 4.14.4 Recovery . 36 4.14.5 Final inspection, measurements and requirements 36 4.15 Robustness of terminations (only for capacitors with strip termination) 37 4.15.1 Test conditions 37 4.15.2 Final inspection and requirements . 37 4.16 Component solvent resistance (if re
31、quired) 37 4.17 Solvent resistance of the marking (if required) . 37 4.18 Accelerated damp heat, steady state (if required) 37 4.18.1 Initial measurement . 37 4.18.2 Conditioning 38 4.18.3 Recovery . 38 4.18.4 Final measurements 38 Annex A (normative) Guidance for the specification and coding of dim
32、ensions of fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 39 Annex B (informative) Capacitance ageing of fixed capacitors of ceramic dielectric, Class 2 . 40 Annex C (informative) Temperature characteristics of capacitance for the reference temperature of 25 C 42 Bibliograp
33、hy 43 Figure 1 Fault: crack or fissure 23 Figure 2 Fault: crack or fissure 23 Figure 3 Separation or delamination 23 Figure 4 Exposed electrodes 23 Figure 5 Principal faces . 24 Figure 6 Reflow temperature profile . 30 Figure A.1 Dimensions . 39 Table 1 Preferred values of category voltages . 12 Tab
34、le 2 Preferred tolerances 13 Table 3 Temperature characteristic of capacitance 13 Table 4 Fixed sample size test plan for qualification approval, assessment level EZ 16 Table 5 Tests schedule for qualification approval . 17 Table 6a Lot-by-lot inspection 21 Table 6b Periodic test 21 Table 7 Measurin
35、g conditions 24 Table 8 Tangent of loss angle limits . 25 Table 9 Test voltages. 26 Table 10 Details of measuring conditions . 27 Table 11 Reflow temperature profiles for Sn-Ag-Cu alloy . 30 Table 12 Maximum capacitance change . 31 Table 13 Maximum capacitance change . 33 Table 14 Number of damp hea
36、t cycles . 33 Table 15 Final inspection, measurements and requirements 34 60384-22 IEC:2011 5 Table 16 Test conditions for damp heat, steady state . 35 Table 17 Final inspection, measurements and requirements 35 Table 18 Endurance test conditions (UC= UR) . 36 Table 19 Endurance test conditions (UC
37、UR) . 36 Table 20 Final inspection, measurements and requirements of endurance test 37 Table 21 Initial requirements 38 Table 22 Conditioning 38 Table A.1 Dimensions 39 Table C.1 Temperature characteristics of capacitance for the reference temperature of 25 C 42 Table C.2 Measuring conditions of tem
38、perature characteristic of capacitance for the reference temperature of 25 C . 42 6 60384-22 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 22: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
39、 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in th
40、e electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted
41、to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Internationa
42、l Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each te
43、chnical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Pu
44、blications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their n
45、ational and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
46、services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees,
47、servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publi
48、cation, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibi
49、lity that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-22 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the firs
