1、 IEC 60695-1-21 Edition 1.0 2016-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary and relevance of test methods Essais relatifs aux risques du feu Partie 1-21: Lignes directrices pou
2、r lvaluation des risques du feu des produits lectrotechniques Allumabilit Rsum et pertinence des mthodes dessais IEC 60695-1-21:2016-09(en-fr) BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserv
3、ed. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If y
4、ou have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette p
5、ublication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si v
6、ous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch A
7、bout the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant rev
8、iew by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specificati
9、ons, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on pr
10、ojects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading o
11、nline dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical te
12、rminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feed
13、back on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, l
14、lectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Applicat
15、ion autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche ava
16、nce permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publicati
17、ons IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ai
18、nsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publi
19、cations IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60695-1
20、-21 Edition 1.0 2016-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary and relevance of test methods Essais relatifs aux risques du feu Partie 1-21: Lignes directrices pour lvaluation
21、 des risques du feu des produits lectrotechniques Allumabilit Rsum et pertinence des mthodes dessais INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 13.220.40, 29.020 ISBN 978-2-8322-3617-8 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT Registere
22、d trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur
23、 agr. 2 IEC 60695-1-21:2016 IEC 2016 CONTENTS FOREWORD 3 INTRODUCTION 5 1 Scope .7 2 Normative references 7 3 Terms and definitions 8 4 Summary of published test methods 12 4.1 General 12 4.2 Tests using heated air or electrical heating 12 4.2.1 Determination of ignition temperature using a hot-air
24、furnace, ISO 871 . 12 4.2.2 Differential scanning calorimetry (DSC), ISO 11357 1 . 13 4.3 Tests using radiant heat 14 4.3.1 Heat release rate Cone calorimeter method, ISO 5660-1 4 14 4.3.2 Heat release of insulating liquids, IEC TS 60695-8-3 5 . 15 4.3.3 Standard test method for determining material
25、 ignition and flame spread properties, ASTM E 1321 6 . 16 4.3.4 Determination of the characteristic heat flux for ignition from a non- contacting flame source, IEC TS 60695-11-11 7 . 17 4.4 Oxygen index tests . 17 4.4.1 Oxygen index Ambient temperature test, ISO 4589-2 8 17 4.4.2 Oxygen index Elevat
26、ed temperature test, ISO 4589-3 10 . 18 4.5 Glowing/hot-wire based test methods 20 4.5.1 Glow wire tests, IEC 60695-2-11 14, IEC 60695-2-12 15 and IEC 60695-2-13 16 . 20 4.5.2 Hot wire coil ignitability test, IEC 60695-2-20 and ASTM D 3874 17 22 4.6 Flame tests . 23 4.6.1 Needle flame test, IEC 6069
27、5-11-5 18 23 4.6.2 50 W Horizontal and vertical flame test methods, IEC 60695-11-10 19 500 W flame test methods, IEC 60695-11-20 20 . 24 4.6.3 1 kW nominal pre-mixed flame, IEC 60695-11-2 23 25 4.6.4 Vertical and 60 tests for aircraft components, FAR 25 25 25 4.7 Tests using an electrical arc 26 4.7
28、.1 Tracking index tests, IEC 60112 26, ASTM D 3638 27 26 4.7.2 High-Current Arc Ignition (HAI), UL 746A Sec. 32 30 . 28 4.7.3 High-voltage arc resistance to ignition (HVAR), UL 746A Sec. 33 31 28 Annex A (informative) Applicability of test methods 30 A.1 Applicability of test methods 30 Bibliography
29、 . 32 Table 1 Main differences between IEC 60112 and ASTM D 3638 27 Table A.1 Applicability of test methods (1 of 2) . 30 IEC 60695-1-21:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIRE HAZARD TESTING Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Igni
30、tability Summary and relevance of test methods FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on
31、all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Pub
32、lication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation.
33、 IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
34、 opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made
35、 to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transpar
36、ently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent cert
37、ification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sh
38、all attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including le
39、gal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pu
40、blication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60695-1-21 has been prepared by IEC technical committ
41、ee 89: Fire hazard testing. The text of this standard is based on the following documents: FDIS Report on voting 89/1336/FDIS 89/1339/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been draf
42、ted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 60695-1-21:2016 IEC 2016 It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This first edition of IEC 60695-1-21 cancels and replaces the first edition of IEC TR 60695-1-21 published in 2
43、008. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Change from a TR to an international standard; b) Modified Introduction; c) Modified Scope; d) Updated normative references; e) Updated terms and defin
44、itions; f) Updates and new text in Clause 4; g) Addition of text concerning ASTM D 3638; h) Updates to Annex A; i) Updates to the bibliography. A list of all the parts in the IEC 60695 series, under the general title Fire hazard testing, can be found on the IEC website. The IEC 60695-1 series, under
45、 the general title Fire hazard testing, consists of the following parts: Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines Part 1-11: Guidance for assessing the fire hazard of electrotechnical products Fire hazard assessment Part 1-12: Guidance for ass
46、essing the fire hazard of electrotechnical products Fire safety engineering Part 1-20: Guidance for assessing the fire hazard of electrotechnical products Ignitability General guidance Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary and relevance o
47、f test methods Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Preselection testing procedures General guidelines Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids The committee has decided that the contents of this publi
48、cation will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60695-1-21:2016 IEC 2016 5 I
49、NTRODUCTION Fires are responsible for creating hazards to life and property as a result of the generation of heat (thermal hazard), and also as a result of the production of toxic effluent, corrosive effluent and smoke (non-thermal hazard). Fires start with ignition and then can grow, leading in some cases to flash-over and a fully develop
