1、 IEC 61188-5-5 Edition 1.0 2007-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Printed boards and printed board assemblies Design and use Part 5-5: Attachment (land/joint) considerations Components with gull-wing leads on four sides Cartes imprimes et cartes imprimes quipes Conception et utilisation
2、 Partie 5-5: Considrations sur les liaisons pistes-soudures Composants sorties en aile de mouette sur quatre cts IEC 61188-5-5:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be repr
3、oduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obta
4、ining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce
5、soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publicatio
6、n, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organiz
7、ation that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendmen
8、t might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: ww
9、w.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing mor
10、e than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further
11、 assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout
12、 ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des p
13、ublications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Publ
14、ished CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de terme
15、s lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f
16、htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61188-5-5 Edition 1.0 2007-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Printe
17、d boards and printed board assemblies Design and use Part 5-5: Attachment (land/joint) considerations Components with gull-wing leads on four sides Cartes imprimes et cartes imprimes quipes Conception et utilisation Partie 5-5: Considrations sur les liaisons pistes-soudures Composants sorties en ail
18、e de mouette sur quatre cts INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 31.180 PRICE CODE CODE PRIX ISBN 2-8318-1061-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2
19、61188-5-5 IEC:2007 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 General information7 3.1 General component description .7 3.2 Marking .7 3.3 Carrier packaging format.8 3.4 Process considerations .8 4 PQFP (square) .8 4.1 Field of application 8 4.2 Component descriptions8
20、4.3 Component dimensions .9 4.4 Solder joint fillet design .13 4.5 Land pattern dimensions .14 5 PQFP (rectangular) 17 5.1 Field of application 17 5.2 Component descriptions18 5.3 Component dimensions .19 5.4 Solder joint fillet design .19 5.5 Land pattern dimensions .21 6 PLQFP (square) .23 6.1 Fie
21、ld of application 23 6.2 Component descriptions23 6.3 Component dimensions .24 6.4 Solder joint fillet design .26 6.5 Land pattern dimensions .28 7 PLQFP (rectangular) 31 7.1 Field of application 31 7.2 Component descriptions31 7.3 Component dimensions .32 7.4 Solder joint fillet design .33 7.5 Land
22、 pattern dimensions .34 8 PTQFP (square) .35 8.1 Field of application 35 8.2 Component descriptions35 8.3 Component dimensions .36 8.4 Solder joint fillet design .39 8.5 Land pattern dimensions .40 Bibliography43 Figure 1 PQFP (square).9 Figure 2 PQFP (square) component dimensions 10 Figure 3 Solder
23、 joint fillet design14 Figure 4 PQFP (square) land pattern dimensions.17 61188-5-5 IEC:2007 3 Figure 5 PQFP (rectangular)18 Figure 6 PQFP (rectangular) component dimensions .19 Figure 7 Solder joint fillet design21 Figure 8 PQFP (rectangular) land pattern dimensions 22 Figure 9 PLQFP (square).23 Fig
24、ure 10 PLQFP (square) component dimensions 24 Figure 11 Solder joint fillet design28 Figure 12 PLQFP (square) land pattern dimensions .31 Figure 13 PLQFP (rectangular) 32 Figure 14 PLQFP (rectangular) component dimensions32 Figure 15 Solder joint fillet design34 Figure 16 PLQFP (rectangular) land pa
25、ttern dimensions 35 Figure 17 PTQFP (square).36 Figure 18 PTQFP component dimensions 37 Figure 19 Solder joint fillet design40 Figure 20 PTQFP land pattern dimensions.42 4 61188-5-5 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES DESIGN AND USE Part 5
26、5: Attachment (land/joint) considerations Components with gull-wing leads on four sides FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is
27、 to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
28、 Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the
29、 IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly
30、as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that se
31、nse. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees un
32、dertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure
33、 to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents i
34、ncluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or r
35、eliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th
36、e elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61188-5-5 has been prepared by IEC technical committee 91: Electronics assembly technology. This bilingual version, publ
37、ished in 2009-09, corresponds to the English version. The text of this standard is based on the following documents: FDIS Report on voting 91/704/FDIS 91/736/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The Fr
38、ench version of this standard has not been voted upon. 61188-5-5 IEC:2007 5 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61188-5-5 is to be read in conjunction with IEC 61188-5-1. A list of all parts of the IEC 61188 series, under the general title Printed
39、 boards and printed board assemblies Design and use, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specifi
40、c publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 6 61188-5-5 IEC:2007 INTRODUCTION This part of IEC 61188 covers land patterns for components with gull-wing leads on four sides. Each clause gives information in accordance with th
41、e following format. The proposed land pattern dimensions in this standard are based upon the fundamental tolerance calculation combined with the given land protrusions and courtyard excesses (see IEC 61188-5-1, Generic requirements). The courtyard includes all issues of the normal manufacturing nece
42、ssities. The unaltered land pattern dimensions of this part are generally applicable for the solder paste application plus reflow soldering process. For application of the wave soldering process, the land pattern dimensions normally have to be modified. Orientation parallel to the wave direction is
43、preferable and special, suitably dimensioned solder thieves should be added. This standard offers a threefold land pattern dimensioning (levels 1, 2, and 3) on the basis of a threefold set of land protrusions and courtyard excesses: maximum (max.); median (mdn) and minimum (min.). Each land pattern
44、has been assigned an identification number to indicate the characteristics of the specific robustness of the land patterns. Users also have the opportunity to organize the information so that it is most useful for their particular design. If a user has good reason to use a concept different from tha
45、t of IEC 61188-5-1, or if the user prefers unusual land protrusions, this standard should be used for checking the resulting solder fillet size. It is the responsibility of the user to verify the SMD land patterns used for achieving an undisturbed mounting process including testing and an ensured re
46、liability for the product stress conditions in use. Component dimensions listed in this standard are those available on the market and should be regarded as for reference only. 61188-5-5 IEC:2007 7 PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES DESIGN AND USE Part 5-5: Attachment (land/joint) considera
47、tions Components with gull-wing leads on four sides 1 Scope This part of IEC 61188 provides information on land pattern geometries used for the surface attachment of electronic components with gull-wing leads on four sides. The intent of the information presented herein is to provide the appropriate
48、 size, shape and tolerances of surface mount land patterns to ensure sufficient area for the appropriate solder fillet, and also allow for inspection, testing and reworking of those solder joints. Each clause contains a specific set of criteria such that the information presented is consistent, prov
49、iding information on the component, the component dimensions, the solder joint design and the land pattern dimensions. The land pattern dimensions are based on a mathematical model that establishes a platform for a solder joint attachment to the printed board. The existing models create a platform that is capable of establishing a reliable solder a
