1、 IEC 62047-22 Edition 1.0 2014-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Micro-electromechanical devices Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates Dispositifs semiconducteurs Dispositifs microlectromcaniques Partie 22:
2、Mthode dessai de traction lectromcanique pour les couches minces conductrices sur des substrats souples IEC 62047-22:2014-06(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publicati
3、on may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enqu
4、iry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque
5、 forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette pu
6、blication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commissio
7、n (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest
8、 edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for
9、 PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Pub
10、lished - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms conta
11、ining more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and Fren
12、ch extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need furt
13、her assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies appar
14、entes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les
15、renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publication
16、s IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les n
17、ouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents
18、 dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues de
19、puis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62047-22 Edition 1.0 2014-06
20、 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Micro-electromechanical devices Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates Dispositifs semiconducteurs Dispositifs microlectromcaniques Partie 22: Mthode dessai de traction lectrom
21、canique pour les couches minces conductrices sur des substrats souples INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 31.080.99 PRICE CODE CODE PRIX ISBN 978-2-8322-1649-1 Registered trademark of the International Electrotechnical Commission Marque dpose d
22、e la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 62047-22:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Sc
23、ope 5 2 Normative references 5 3 Terms, definitions, symbols and designations 5 3.1 Terms and definitions 5 3.2 Symbols and designations 6 4 Test piece . 6 4.1 General . 6 4.2 Shape of a test piece 6 4.3 Measurement of dimensions . 7 5 Testing method and test apparatus 7 5.1 Test principle 7 5.2 Tes
24、t machine 7 5.3 Test procedure 9 5.4 Test environment 9 6 Test report . 9 Figure 1 Bilayered test piece 6 Figure 2 Schematic of an electromechanical test machine . 8 Figure 3 Electromechanical tensile grip 9 Table 1 Symbols and designations of a test piece 6 IEC 62047-22:2014 IEC 2014 3 INTERNATIONA
25、L ELECTROTECHNICAL COMMISSION _ SEMICONDUCTOR DEVICES MICRO-ELECTROMECHANICAL DEVICES Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compri
26、sing all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standa
27、rds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepar
28、atory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organiz
29、ations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of
30、 recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
31、 by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or region
32、al publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
33、 independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees fo
34、r any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Nor
35、mative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held resp
36、onsible for identifying any or all such patent rights. International Standard IEC 62047-22 has been prepared by subcommittee 47F: Micro- electromechanical systems, of IEC technical committee 47: Semiconductor devices. The text of this standard is based on the following documents: FDIS Report on voti
37、ng 47F/186/FDIS 47F/190/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 62047-22:2014 IEC 2014 A list of all parts in the
38、 IEC 62047 series, published under the general title Semiconductor devices Micro-electromechanical devices, can be found in the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webst
39、ore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be u
40、seful for the correct understanding of its contents. Users should therefore print this document using a colour printer. IEC 62047-22:2014 IEC 2014 5 SEMICONDUCTOR DEVICES MICRO-ELECTROMECHANICAL DEVICES Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates 1
41、 Scope This part of IEC 62047 specifies a tensile test method to measure electromechanical properties of conductive thin micro-electromechanical systems (MEMS) materials bonded on non-conductive flexible substrates. Conductive thin-film structures on flexible substrates are extensively utilized in M
42、EMS, consumer products, and flexible electronics. The electrical behaviours of films on flexible substrates differ from those of freestanding films and substrates due to their interfacial interactions. Different combinations of flexible substrates and thin films often lead to various influences on t
43、he test results depending on the test conditions and the interfacial adhesion. The desired thickness of a thin MEMS material is 50 times thinner than that of the flexible substrate, whereas all other dimensions are similar to each other. 2 Normative references The following documents, in whole or in
44、 part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62047-2:2006, Semiconductor devices Micro-
45、electromechanical devices Part 2: Tensile testing method of thin film materials IEC 62047-3:2006, Semiconductor devices Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing IEC 62047-8:2011, Semiconductor devices Micro-electromechanical devices Part 8: Strip bend
46、ing test method for tensile property measurement of thin films ISO 527-3:1995, Plastics Determination of tensile properties Part 3: Test conditions for films and sheets 3 Terms, definitions, symbols and designations 3.1 Terms and definitions For the purposes of this document, the following terms and
47、 definitions apply. 3.1.1 gauge factor G Fratio of the change in electrical resistance divided by the original resistance (R o , resistance in the undeformed configuration) to engineering strain (e) Note 1 to entry: Gauge factor is expressed as G F= (R R O )/R O e, where R is the electrical resistan
48、ce in the deformed configuration. 6 IEC 62047-22:2014 IEC 2014 3.1.2 elongation at electrical failure A telicengineering strain value at which the electrical resistance starts to exceed a predefined limit 3.2 Symbols and designations The shape of the test piece and symbols are presented in Figure 1
49、and Table 1, respectively. The overall shape of the test piece is similar to a conventional thin-film or sheet test piece (in accordance with ISO 527-3) for tensile tests, but it has a multilayered structure. Figure 1 Bilayered test piece Table 1 Symbols and designations of a test piece Symbol Unit Designation l 1m Gauge length for strain and resistance change measurements l 2m O
