1、 IEC 62313 Edition 1.0 2009-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock Applications ferroviaires Alimentation lectrique et matriel roulant Critres techn
2、iques pour la coordination entre le systme dalimentation (sous-station) et le matriel roulant IEC 62313:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in a
3、ny form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights
4、 to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd
5、 lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordon
6、nes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and
7、 publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publi
8、shed. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/ju
9、stpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and
10、 definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please vis
11、it the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectri
12、cit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI:
13、www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/o
14、nline_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectr
15、iques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nou
16、s donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62313 Edition 1.0 2009-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Power supply
17、 and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock Applications ferroviaires Alimentation lectrique et matriel roulant Critres techniques pour la coordination entre le systme dalimentation (sous-station) et le matriel roulant INTERNATIONAL
18、ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 45.060 PRICE CODE CODE PRIX ISBN 2-8318-1035-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62313 IEC:2009 CONTENTS FOREWORD.5 1 Scope
19、7 2 Normative references .7 3 Terms and definitions .8 4 Periods over which parameters can be averaged or integrated .11 5 Different source sections 11 5.1 AC phase separation sections .11 5.2 System separation sections.12 5.3 Acceptance criteria13 6 Power factor of a train 13 6.1 General .13 6.2 I
20、nductive power factor .13 6.3 Capacitive power factor.14 7 Train current limitation14 7.1 Maximum train current.14 7.2 Automatic regulation15 7.3 Power or current limitation device15 8 Quality index of the power supply.16 8.1 General .16 8.2 Description16 8.3 Values for U mean usefulat the pantograp
21、h 17 8.4 Relation between U mean useful and U min1 .17 8.5 Acceptance criteria17 9 Type of line and electrification system 17 10 Harmonics and dynamic effects 17 10.1 General .17 10.2 Acceptance procedure for new elements .19 10.3 Compatibility study19 10.4 Methodology and acceptance criteria 23 11
22、Coordination of protection 23 11.1 General .23 11.2 Protection toward short-circuits .23 11.3 Coordination of the circuit breakers on loss of line voltage and re- energisation 24 11.4 D.C. electrification systems: transient current during closure.24 11.5 Acceptance criteria24 12 Regenerative braking
23、 .25 12.1 General conditions on the use of regenerative braking 25 12.1.1 Traction unit conditions .25 12.1.2 Power supply system conditions 25 12.2 Acceptance criteria25 13 Tests25 14 Test methodology.26 14.1 Neutral sections 26 14.1.1 Tests for traction unit.26 62313 IEC:2009 3 14.1.2 Tests for in
24、frastructure 26 14.2 Power factor26 14.3 Train current limitation.27 14.4 Quality index of the power supply27 14.4.1 U mean useful(zone) 27 14.4.2 U mean useful(train).27 14.4.3 Relation between U mean usefuland U min1 28 14.5 Harmonics and dynamic effects.28 14.6 Coordination of protections28 14.6.
25、1 Protection toward short-circuits and action on circuit-breakers 28 14.6.2 Coordination of the circuit breakers on loss of line voltage and re- energisation.28 14.6.3 DC traction units: Transient current during closure 29 14.7 Regenerative braking 29 14.7.1 Traction unit 29 14.7.2 Substation .29 An
26、nex A (informative) Integration periods over which parameters can be averaged .30 Annex B (informative) Selection criteria determining the voltage at the pantograph for high speed trains 31 Annex C (informative) Investigation of harmonic characteristics and related overvoltages .34 Annex D (informat
27、ive) Data related to the compatibility study of harmonics and dynamic effects.36 Annex E (informative) Types of different source sections .42 Annex F (informative) Maximum allowable train current .44 Annex G (informative) Maximum contact line rail short-circuit level as European practise.45 Annex H
28、informative) di/dt when closure of traction unit circuit breaker.46 Annex I (informative) Special national conditions .47 Bibliography48 Figure 1 Maximum train current against voltage.15 Figure 2 Procedure for compatibility study of harmonics and dynamic effects 20 Figure E.1 Insulator section .42
29、Figure E.2 Neutral section with insulators 42 Figure E.3 Neutral section with insulated overlaps .42 Figure E.4 Split neutral section with an insulator and insulated overlaps42 Figure E.5 Split neutral section with three insulated overlaps.43 Figure E.6 Changeover section43 Figure E.7 Example of sys
30、tem separation section from AC to DC.43 Figure E.8 Example of system separation section from DC to AC.43 Table 1 Total inductive power factor of a train.14 Table 2 Value of factor a (informative) .15 Table 3 Minimum U mean usefulat pantograph (V)17 Table 4 Description of steps.21 4 62313 IEC:2009 Ta
31、ble 5 Action on circuit-breakers at an internal fault within a traction unit.23 Table 6 Tests.26 Table A.1 Integration period.30 Table D.1 Characterization of a.c. electrified lines .36 Table D.2 Characterisation of d.c. electrified lines .38 Table D.3 Characterisation of one a.c. train with respect
32、 to impedances, harmonics and stability 39 Table D.4 Characterisation of one d.c. train with respect to impedances, harmonics and stability 41 Table F.1 Maximum allowable train current (A) 44 Table G.1 Maximum contact line rail short-circuit level as European practise45 Table H.1 di/dt when closure
33、of traction unit circuit breaker .46 62313 IEC:2009 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS POWER SUPPLY AND ROLLING STOCK TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK FOREWORD 1) The International Electrotechnical Commission
34、IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addi
35、tion to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interes
36、ted in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance wit
37、h conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested I
38、EC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for
39、 the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between
40、any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users s
41、hould ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other d
42、amage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use
43、of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent ri
44、ghts. International Standard IEC 62313 has been prepared by IEC technical committee 9: Electrical equipment and systems for railways. This standard is based on EN 50388 (2005). The text of this standard is based on the following documents: FDIS Report on voting 9/1225/FDIS 9/1258/RVD Full informatio
45、n on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 62313 IEC:2009 The committee has decided that the contents of this publication will remain uncha
46、nged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62313 IEC:2009 7 RAILWAY APPLICATIONS POWER SUP
47、PLY AND ROLLING STOCK TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK 1 Scope This International Standard is intended to be used to set up the requirements for the acceptance of rolling stock on infrastructure in the field of: co-ordination of protection p
48、rinciples between power supply and traction units, especially fault discrimination for short-circuits; co-ordination of installed power on the line and power demand of the trains; co-ordination of traction unit regenerative braking and power supply receptivity; co-ordination of harmonic behaviour. T
49、his standard deals with the definition and quality requirements of the power supply at the interface between traction unit and fixed installations. The standard specifies the interface between rolling stock and electrical fixed installations for traction, in the frame ”supply system“. The interaction between pantograph and overhead line and the i
