ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf

上传人:cleanass300 文档编号:1242614 上传时间:2019-08-27 格式:PDF 页数:50 大小:10.26MB
下载 相关 举报
ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf_第1页
第1页 / 共50页
ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf_第2页
第2页 / 共50页
ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf_第3页
第3页 / 共50页
ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf_第4页
第4页 / 共50页
ANSI NEMA Z535 4-2011 Product Safety Signs and Labels.pdf_第5页
第5页 / 共50页
点击查看更多>>
资源描述

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI Z535.4-2011 Product Safety Signs and LabelsANSI Z535.4-2011 Revision of ANSI Z535.4-2007 American National Standard Product Safety Signs and Labels Secretariat: National Electrical Manufacturers Association Approved July 19,

2、 2011 Published November 15,2011 American National Standards Institute, Inc. ANSI Z535.42011 DISCLAIMER The inlormalion in this publication was considered technically sound by the consensus ol persons engaged in the development and approval ol the document at the time it was developed. Consensus doe

3、s not necessarily mean that there is unanimous agreement among every person participating in the development olthis document. ANSI standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This proc

4、ess brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or

5、verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensa

6、tory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the i

7、nformation in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not un

8、dertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of

9、a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this

10、 publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or

11、safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. AMERICAN NATIONAL STANDARD Published by Approval of an American National Standard requires verification by ANSI that the requirements for due pro

12、cess, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more

13、 than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone

14、, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any Amer

15、ican National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the

16、 title page of this standard. This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may r

17、eceive current information on all standards by calling or writing the American National Standards Institute. National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 2011 by National Electrical Manufacturers Association All rights reserved including translati

18、on into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part ol this publication may be reproduced In any fonn, In an electronic retneval syste

19、m or otherwise, without the prior written pennisslon of the publisher. Printed in the United States of America ANSI Z535.42011 This page intentionally left blank. ii ANSI 2535.4-201 1 Contents Pogo Foreword . vii 1 Introduction 1 2 Scope and Purpose . 1 2.1 Scope 1 2.2 Purpose . 1 2.2.1 Existing Ame

20、rican National Slandards 1 3 Application and exceptions 1 3.1 Application . 1 3.1.1 ISO-foonatted safety signs 1 3.2 Exceptioos . 2 4 Definitions 2 5 Use of signal words 4 5.1 Hazard classification . 4 5.2 Signal word selection 4 5.3 Multiple hazard signs . 4 6 Sign or label format 4 6.1 Panels 4 6.

21、2 Panel arrangement 4 6.2.1 Panellonnat 4 6.2.2 Panel placemenl 4 6.2.3 Panel shape 5 6.3 Safety alert symbol 5 6.4 Distinctiveness 5 6.5 Wold message . 5 6.5.1 Multiple messages . 5 6.5.2 Longer word messages and space limalions 5 iii ANSI Z535.4-2011 7 Safety sign and label colors . 5 7. 1 Standar

22、d colors . 5 7.2 Signal word panels 5 7.2.1 DANGER . 5 7.2.2 WARNING . 5 7.2.3 CAUTION 6 72.4 NOTICE . 5 7 2 .5 SAFETY INSTRUCTIONS or similar words 5 7.2.6 Safely afert symbol . . 6 7.3 Message panel 6 7.4 SaJety symbol panel 6 7.5 Bordar 6 7.6 Color options . 6 7.6.1 Other colors . 6 7.62 When spe

23、cial circumstances fimltlhe use ol sign colors 6 7.6.3 When special circumstances preclude the use of safely colors 6 8 Letter style and size . 6 8.1 Letter style . 6 8.1 . 1 Signal words 6 8. 1.2 Message panef lettering 6 6.2 Le11er slze 6 8.2.1 Leltering 6 8.2.2 Determination ol minimum safe viewi

24、ng distance . 7 8.2.3 Signal word lener height 7 9 Sign and label placement 7 9.1 Location . 7 9. 1 . 1 Sal ely instruction signs . 7 9.2 Protection 7 lv ANSI Z535.4-201 1 t 0 Expeced lite and maintenance 7 1 0.1 Expeded lite 7 10.2 Product user instructions . 7 10.2.1 Maintenance . . 7 10.2.2 Repla

25、cemen (safety white triangle, safely red exclamation rna. safety red background) (B) for uso with WARNING signal word; (safety black triangle, safety orange exclamation mark) (C) lor use with CAUTION signal word; (safety black triangle, safety yellow exclamat.on mark) (D) and (E) lor use with DANGER

26、, WARNING, or CAUTION signal words ; (DIs a safety yellow triangle with a M fely black border and safety black exclamation mark; (Ei ts a safety yellow triangle with a safety black exctamatron mark and a safety yellow border around a safety black band) NOTE-(0) and (E) are provided to allow lor cons

27、istency wlth certain ISO standards such as ISO 38641 and ISO 3864-2. Figure 1 The Safety Alert Symbol 4.12 safety sign: A visual alerting device in the form of a decal, label, placard, cord tag, or other marking such as an embossing, stamping, etching, or other process that provides safety informati

28、on. 4.12.1 environmental/facility safety sign: Sign or placard in a work or public area that provides safety information. 4.12.2 product safety sign or label: Sign, label, cord tag, or decal affixed to a product that provides safety information about that product. 4.12.2.1 permanent safety sign or l

29、abel: A sign that is to be permanently affixed to the product so that it cannot be easily removed. Permanent safety signs typically provide information about potential exposure to hazards inherent in the normal use associated with the product, or which might be created during other reasonably antici

30、pated product use or misuse. 4.12.2.2 temporary safety sign or tag: A sign affixed to a product or its container that is intended to be removed. Temporary safety signs and tags typically provide information about a temporary hazard created by situations such as shipment, setup, service or repair. 4.

31、12.3 Types of product safety signs 4.12.3.1 hazard alerting sign: Sign directly related to a hazard that identifies the hazard, the level of hazard seriousness, the probable consequence of involvement with the hazard, and how the hazard can be avoided. When information on consequence, avoidance, or

32、type of hazard is readily inferred, this Information may be omitted from the message panel (see Annex 83.1 ). 4.12.3.2 safety notice sign: Sign that gives notice of safety practices not directly related to physical injury. 4.12.3.3 safety instruction sign: Sign that identifies specific safety-relate

33、d i ns1 ructions or procedures. This type of sign may be used to supplement a haxard alerting sign by providing a place to convey lengthy safety-related instructional information. 4.13 safety symbol: A graphic representation intended to convey a safety message without the use of words. (See ANSI Z53

34、5.3) 4.14 signal words: The words used in the signal word panel. The signal words for hazard alerting signs are “DANGER,“ “WARNING, and cAUTION: Safety notice signs use the signal word “NOTICE: Safety instruction signs use signal words that are specific to the situation. See Annex E for guidance in

35、selecting a signal word. 4.14.1 DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations. 3 ANSI Z535.4-2011 4.14.2 WARNING: Indicates a hazardous situation that, if not avoided, could resul

36、t in death or serious injury. 4.14.3 CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. 4.14.4 NOTICE: Indicates information considered important, but not hazard-related (e.g., messages relating to property damage). The safety alert symbol shall

37、not be used with this signal word. 4.14.5 SAFETY INSTRUCTIONS or similar words: Indicates a type of safety sign, or a separate panel on a safety sign, where specific safety-related instructions or procedures are described. More definitive signal words are encouraged, where practical (e.g., SAFE SHUT

38、DOWN PROCEDURE, SAFE OPERATING PROCEDURES, BOILER SHUTDOWN PROCEDURE, LOCKOUT PROCEDURE, SAFE INSTALLATION INSTRUCTIONS, EMERGENCY SHUTDOWN INSTRUCTIONS). The safety alert symbol shall not be used with this classification of signal word. This signal word may also be used as a heading for a safety in

39、struction panel incorporated into a hazard alerting sign to convey lengthy instructional information (see Annex 87). 5 Use of signal words 5.1 Hazard classification Hazard alerting signs are classified according to the relative seriousness of the hazardous situation. The classification is based on t

40、he probability of being injured if the hazard is not avoided, and on the severity of the resulting injury. For hazard alerting signs, there are three hazard classifications that are denoted by the signal words “DANGER,“ “WARNING,“ and “CAUTION.“ 5.2 Signal word selection When no federal, state, or l

41、ocal government code, regulation, standard, or guideline specifies a particular signal word, selection of the signal word shall be made in accordance with the definitions provided in Section 4. 5.3 Multiple hazard signs 5.3.1 One sign or label When more than one hazard exists on a product, either in

42、 close proximity to each other, or which might be preventable from a common location, one hazard alerting sign may be used, provided that the information addresses each hazard. 5.3.2 Signal word for multiple hazard signs When multiple hazardous situations are addressed on one hazard alerting sign, a

43、nd the hazards are classified at different levels of seriousness, the signal word corresponding to the greatest level of seriousness (i.e., DANGER, WARNING, or CAUTION) shall be used. 6 Sign or label format 6.1 Panels A product safety sign or label consists of a signal word panel plus a message pane

44、l. On hazard alerting signs, in addition to a word message, a safety instruction panel may be incorporated as a place to convey lengthy instructional information (see Figure 13). A safety symbol panel may be used to communicate a part or all of the elements of a message panel (see Annex 83.1 ). 6.2

45、Panel arrangement 6.2.1 Panel format The sign or label panels may be in a horizontal or vertical format. See Figures 2 through 13 for examples. 6.2.2 Panel placement The relative placement of the signal word and message panels should be such that the signal word panel precedes all text in the messag

46、e panel, as shown in Figures 2 through 6 and in Figure 10. When space is 4 ANSI Z535.4-2011 limited, a panel arrangement such as that shown in Figures 7, 8, and 11 may be used to increase the size of the message panel. When vertical space, in particular, is limited, the panel arrangement shown in Fi

47、gure 8 may be used. An option for a larger symbol panel is shown in Figure 9. When no word message panel is used, the panel arrangement shown in Figure 12 may be used. Figure 13 is an example of how a safety instructions panel may be incorporated into a hazard alerting sign. 6.2.3 Panel shape Panels

48、 may be non-rectangular to make good use of the available space. 6.3 Safety alert symbol A safety alert symbol, when used with the signal word, shall precede the signal word. The base of the safety alert symbol shall be on the same horizontal line as the base of the letters of the signal word. The h

49、eight of the safety alert symbol shall equal or exceed the signal word letter height. 6.4 Distinctiveness A safety sign or label shall be distinctive on the product. A contrasting border may be used on the sign to achieve distinctiveness. 6.5 Word message The word message should be concise and readily understood. 6.5.1 Multiple messages Multiple messages should be provided with sufficient space between them, when feasible, to prevent them from visually blending together. 6.5.2 Longer word messages and space limitations When detailed instructions, precautions, or consequences re

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1