CNS 127-1947 Metric Taper Gauge with Flat Head《公制圆锥量规（有扁头）》.pdf

相关资源

HB 4351-1989 扁头螺钉.pdf

TCVN 285-1986 Plat head rivets《扁头铆钉》.pdf

HB 7344.26-1996 数控机床用夹具元件.大型扁头定位销.pdf

SN 197 432-1984 Linear density of yarns and twists - Titer《润滑喷嘴 扁头润滑喷嘴》.pdf

HB 7344.26-1996 《数控机床用夹具元件 大型扁头定位销》.pdf

CNS 130-1972 Morse Taper Gauge Without Flat Head《莫氏圆锥量规（无扁头）》.pdf

TIS 412-1982 Standard for slotted countersunk (flat) head screws《开槽圆柱头(扁头)螺钉标准》.pdf

CNS 128-1947 Metric Taper Gauge Without Flat Head《公制圆锥量规（无扁头）》.pdf

DLA MS21271 REV A-1963 SCREW INSTRUMENT - BINDING HEAD《仪器的扁头结合螺钉》.pdf

C0012700_459 Metric Taper Gauge with Flat Head《公制圆锥量规（有扁头）》.pdf

猜你喜欢

EN 15811-2014 en Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts《农业用机械 移动传输部分使用的有无保护闸的固定式防护及联锁式防护(ISO TS 28.pdf

EN 15812-2011 en Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability《防水用聚合物改性沥青厚涂层 裂纹桥接能力的测定》.pdf

EN 15813-2011 en Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures《防水用聚合物改性沥青厚涂层 低温下柔韧性的测定》.pdf

EN 15814-2011 en Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements (Incorporates Amendment A2 2014)《聚合物改性沥青厚防水涂料 定义和需求》.pdf

EN 15815-2011 en Polymer modified bituminous thick coatings for waterproofing - Resistance to compression《防水用聚合物改性沥青厚涂层 耐压性》.pdf

EN 15816-2011 en Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain《防水用聚合物改性沥青厚涂层 抗雨性》.pdf

EN 15817-2011 en Polymer modified bituminous thick coatings for waterproofing - Water resistance《防水用聚合物改性沥青厚涂层 抗水性》.pdf

EN 15818-2011 en Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature《防水用聚合物改性沥青厚涂层 高温下尺寸规格稳定性的测定》.pdf

EN 15819-2011 en Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried《防水用聚合物改性沥青厚涂层 充分干燥时涂层的厚度缩减 》.pdf