CNS 380-1984 Calcium Chloride for Industrial Use《氯化钙（工业用）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

C0048800_374 Method of Test for Specific Gravity and Absorption of Coarse Aggregates《粗粒料比重及吸水率试验法》.pdf

C0048900_459 Method of Test for Surface Moisture in Fine Aggregates《细粒料表面含水率试验法》.pdf

C0049000_809 Method of Test for Resistance to Abrasion of Small Size Coarse Aggregates by Use of the Los Angeles Machine《粗粒料（３７．５ｍｍ以下）磨损试验法》.pdf

C0049100_459 Method of test for materials finer than 75μm sieve in mineral aggregates by washing《粒料内小于试验筛７５μｍＣＮＳ３８６材料含量试验法（水洗法）》.pdf

C0049200_781 Whitworth Thread (Without Tip Clearance)《韦氏螺纹（尖端无空隙）》.pdf

C0049300_346 Fine Whitworth Thread (Diameter Ranging From 20 to 189 mm with Tip Clearance)《韦氏细螺纹（尖端有空隙，直径自２０至１８９公厘）》.pdf

C0049400_317 Parallel Pipe Threads《平行管螺纹》.pdf

C0049500_488 Taper Pipe Threads《推拔管螺纹》.pdf

C0049600_516 ISO Metric Screw Threads-Basic Profile (General Purpose)《公制螺纹基准轮廓（ＩＳＯ制）》.pdf