CNS 509-1955 Knuckle Thread for Poison Gas Mask《圆螺纹（防毒面具类用）》.pdf

相关资源

GB 2890-1995 过滤式防毒面具通用技术条件.pdf

GB T 2891-1995 过滤式防毒面具面罩性能试验方法.pdf

GB T 2892-1995 过滤式防毒面具滤毒罐性能试验方法.pdf

GB T 2891-1995 过滤式防毒面具面罩性能试验方法.pdf

GB T 2892-1995 过滤式防毒面具滤毒罐性能试验方法.pdf

GB 2890-2009 呼吸防护.自吸过滤式防毒面具.pdf

GB 2890-1995 过滤式防毒面具通用技术条件.pdf

ARMY MIL-C-10083 C (2)-1994 CLAMPS WIRE GAS MASK《防毒面具线夹》.pdf

ARMY MIL-C-10083 C NOTICE 2-1995 CLAMPS WIRE GAS MASK《防毒面具线夹》.pdf

ARMY MIL-C-10083 C VALID NOTICE 1-1988 CLAMPS WIRE GAS MASK《防毒面具线夹》.pdf

猜你喜欢

AGMA 98FTM5-1998 Low Vibration Design on a Helical Gear Pair《螺旋齿轮副上的低振动设计》.pdf

AGMA 98FTM6-1998 Calibration of Master Gears on Coordinate Measurement Machines《坐标量测设备上的主齿轮的校准》.pdf

AGMA 98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control《新一代和质量控制用准双曲面的和伞形齿轮齿的3D形状精度检查》.pdf

AGMA 98FTM8-1998 New Test Methods for the Evaluation of Wear Scuffing and Pitting Capacity of Gear Lubricants《齿轮润滑剂的磨损 擦伤和点蚀能力评价的新试验方法》.pdf

AGMA 98FTM9-1998 Studies on Improvement of Surface Durability of Case-Carburized Steel Gear - Effects of Surface Finish Processes upon Oil Film Formation《关于提高渗碳钢齿轮的表面耐久性的研究.表面精整工艺对.pdf

AGMA 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears《用于检测齿轮中的磨削损伤的巴克豪森(Barkhausen)噪声检验法》.pdf

AGMA 99FTM10-1999 Design and Testing of a Low Noise Marine Gear《低噪声船用齿轮的设计和试验》.pdf

AGMA 99FTM11-1999 Performance of Nitrided Gears in High Speed Epicyclic Gearbox Used in Gas Turbogenerators - a Case Study《燃气轮机发电机组用高速行星齿轮箱中的氮化齿轮的性能.一项案例分析》.pdf

AGMA 99FTM12-1999 Gearbox Field Performance from a Rebuilder's Perspective《从维修者的角度看到的变速箱的野外性能》.pdf