CSN ON 50 3435-1966 Embossing papers and foils《提花纸和压印箔》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 7682-2007 Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Requirements for amplification and detection.pdf

TCVN 7683-1-2007 Test conditions for milling machine with table of variable height Testing of the accuracy Part 1 Machines with horiaontal spindle 《带可变高度工作台的铣床的试验条件 精度检验 第1部分 带水平主轴.pdf

TCVN 7683-2-2007 Test conditions for milling machine with table of variable height Testing of the accuracy Part 2 Machines with verticle spindle 《带可变高度工作台的铣床的试验条件 精度检验 第2部分 带垂直主轴的机.pdf

TCVN 7684-2007 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) Performance requirements《灯附件 放电灯(管形荧光灯除外)用镇流器 性能要求》.pdf

TCVN 7685-1-2007 Test conditions for manually controlled milling machines with table of fixed height Testing of the accuracy Part 1 Machines with horizontal spindle《带固定高度工作台的手工控制铣床.pdf

TCVN 7685-2-2007 Test conditions for manually controlled milling machines with table of fixed height Testing of the accuracy Part 2 Machines with vertical spindle《带固定高度工作台的手工控制铣床的试.pdf

TCVN 7686-2007 Microbiology of food and animal feeding stuffs Horizontal method for the detection of Escherichia coli O157《食品和动物饲料的微生物学 大肠杆菌O157检测的水平法》.pdf

TCVN 7687-1-2013 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 1 Machines with fixed column and movable table《机.pdf

TCVN 7687-2-2013 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2 Machines with movable column and fixed table《机.pdf