HG T 21541-1992 General drawing of standard joints for welding H shaped steel《焊接H型钢标准节点通用图》.pdf

相关资源

HG T20721-2021 浓盐水蒸发塘设计规范.pdf

HG T20719-2021 微生物法修复化工污染土壤技术规范.pdf

HG T 5481-2018 C.I.酸性蓝185.pdf

HG T 5502-2018 N-甲基-4-（对甲酰苯乙烯基）吡啶甲基硫酸盐.pdf

HG T 5455-2018 发动机气缸盖罩橡胶密封垫.pdf

HG T 5473-2018 聚氧化乙烯.pdf

HG T 5417-2018 甲醇气相脱水制二甲醚催化剂活性试验方法.pdf

HG T 5488-2018 C.I.酸性红405.pdf

HG T 5480-2018 C.I.酸性黄99.pdf

HG T 5489-2018 邻甲氧基苯胺-对-羟乙基砜硫酸酯.pdf

猜你喜欢

GOST 21580-1976 End countersinks with cylinder chucking for machining parts from light alloys Design and dimensions《轻合金零件加工用圆柱柄端面扩孔钻 结构及尺寸》.pdf

GOST 21581-1976 Tapered countersinks for machining parts for light alloys Design and dimensions《轻合金零件加工用锥形柄扩孔钻 结构及尺寸》.pdf

GOST 21582-1976 End countersinks with taper chucking for machining parts from light alloys Design and dimensions《轻合金零件加工用锥形柄端面扩孔钻 结构及尺寸》.pdf

GOST 21583-1976 Tapered carbide-tipped countersinks for machining parts from lignt alloys Design and dimensions《轻合金零件加工用硬质合金锥形柄扩孔钻 结构及尺寸》.pdf

GOST 21584-1976 Shell countersinks for machining parts from light alloys Design and dimensions《轻合金零件加工用套式扩孔钻 结构及尺寸》.pdf

GOST 21585-1976 Shell carbide-tipped countersinks for machining parts from light alloys Design and dimensions《轻合金零件加工用镶硬质合金刀片套式扩孔钻》.pdf

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm Hole tolerance《加工直径3mm～80mm轻合金孔用扩孔钻 直径公差》.pdf

GOST 21600 17-1983 Ferrochrome Methods for the determination of chromium《铬铁 铬的测定法》.pdf

GOST 21600 18-1983 Ferrochrome Methods for the determination of total aluminium《铬铁 铝的测定法》.pdf