1、 IEEE Guide for the Use of Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE) Sponsored by the IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Standards Coordinating Committee
2、 20 IEEE Std 1232.3-2014 IEEE Std 1232.3-2014 IEEE Guide for the Use of Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE) Sponsored by the IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems Approved 20 August 2014 IEEE-SA Standar
3、ds Board Abstract: Guidance to developers of IEEE Std 1232-conformant applications is provided in this guide. A simple doorbell is used as an example system under test to illustrate how the static model constructs of Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTAT
4、E) are used to form a diagnostic reasoner knowledge base. Each of AI-ESTATEs knowledge base types is discussed in conceptual terms, and how those concepts are represented in exchange files is shown. Also, some of the nuanced aspects of diagnostic knowledge bases in AI-ESTATE are clarified. An exampl
5、e reasoner session is provided to illustrate the use of AI-ESTATE services. Keywords: AI-ESTATE, Bayesian Network, diagnosis, diagnostic inference, diagnostic model, diagnostic services, D-matrix, fault tree, IEEE 1232.3, knowledge exchange, reasoner, system test The Institute of Electrical and Elec
6、tronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 October 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a p
7、articular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE stand
8、ard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved a
9、nd issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity
10、nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a com
11、petent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROF
12、ITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REG
13、ARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official
14、 statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position
15、 of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for r
16、evision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed
17、change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societie
18、s and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisi
19、ons to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicab
20、le laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publica
21、tion of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are
22、 adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public
23、authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or in
24、dividual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be
25、obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigend
26、a, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not
27、 undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given doc
28、ument is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards
29、 development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
30、 Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. I
31、f a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwillin
32、g to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has n
33、ot been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a
34、 Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further informat
35、ion may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the AI-ESTATE Users Guide Working Group had the following membership: Simon Jessop, Chair Darryl Busch, Co-Chair Michael Bodkin Nathan Fortier Mike Seavey John Sheppard Liessman Sturlaugs
36、on Timothy Wilmering The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Malcom Brown Darryl Busch Keith Chow William Frank Randall Groves Werner Hoelzl Noriyuki Ikeuchi Anand Jain Albert Livshitz Teresa
37、Lopes Mukund Modi Ion Neag Alexandros Nikitas Leslie Orlidge Ulrich Pohl Bartien Sayogo Mike Seavey John Sheppard Joseph Stanco Walter Struppler Ronald Taylor Timothy Wilmering Daidi Zhong When the IEEE-SA Standards Board approved this guide on 21 August 2014 it had the following membership: John Ku
38、lick, Chair Jon Walter Rosdahl, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Philippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David Law Hung Ling Oleg Logvinov T. W. Olse
39、n Glenn Parsons Ron Peterson Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member EmeritusAlso included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE-SA Conten
40、t Publishing Patricia Gerdon IEEE-SA Technical Community Programs Copyright 2014 IEEE. All rights reserved. vi Introduction This introduction is not part of IEEE Std 1232.3-2014, IEEE Guide for the Use of Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE). IEEE Std
41、 1232-2010, IEEE Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE) defines formal information models and software services specific to several different types of diagnostic reasoners to enable unambiguous access to and understanding of the information
42、 supporting system test and diagnosis. This guide supplements IEEE Std 1232-2010 and is part of the document set. This guide has been prepared to help all users of IEEE Std 1232-2010. IEEE Std 1232-2010 may be used within any test discipline and with any carrier language, and the examples provided i
43、n this guide should be seen as typical. This guide explains AI-ESTATE features and application using a consistent simple doorbell system example. It describes the static diagnostic model information contained in the Common Element Model (CEM) and four additional specialized diagnostic model types. T
44、he guide also shows how the standard supports the dynamic operation of the reasoner using standard services. The need for a guide arose from the experience of users in the creation of diagnostic models and applications using IEEE Std 1232-2010. This experience showed that further information and exa
45、mples on the implementation and application of the standard was required. The purpose of this guide is to provide guidance in the technique of implementation, application, and usage of the basic diagnostic models defined in IEEE Std 1232-2010 to create diagnostic models and reasoning applications. T
46、his is seen as particularly important in promoting the use of a relatively new and unambiguous method of describing diagnostic information. This guide is not intended to be used as an instruction manual for IEEE Std 1232-2010 nor as a substitute for formal training, but by its nature it should find
47、some application in the training environment. Clause 5 is intended as a brief introduction to the history and development of AI-ESTATE. Clause 7 concentrates on the description of the static diagnostic models used to describe system test and diagnosis information. The Common Element Model (CEM), Fau
48、lt Tree Model (FTM), Bayesian Network Model (BNM), Dmatrix Inference Model (DIM), and Diagnostic Logic Model (DLM) are all covered. Clause 8 provides a description of the AI-ESTATE reasoner services and provides a diagnostic session sequence example. IEEE Std 1232-2010 does not specify any particula
49、r software language, interface bindings, or client-reasoner communication framework, and this guide does not provide any advice on this topic. Copyright 2014 IEEE. All rights reserved. vii Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 1.3 Word usage 2 1.4 IEEE download site . 2 2. Normative references 2 3. Definitions, acronyms, and abbreviations 2 3.1 Definitions . 2 3.2 Acronyms and abbreviations . 2 4. Background 3 5. Use cases 5 5.1 Introduction . 5 5.2 Static model exchange . 5 5.3 Technology insertion . 5 5.4 Session data export 5 6. Introduction to the doorbell ex
