1、 IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements Sponsored by the IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Standards Coordin
2、ating Committee 20IEEE Std 1636.99-2013IEEE Std 1636.99-2013 IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements Sponsor IEEE Standards Coordinating Committees on Test and Diagnosis for Electronic Systems (SCC20) Approved 23
3、August 2013 IEEE-SA Standards Board Abstract: This standard is intended to promote and facilitate interoperability between components of SIMICA. The standard defines EXPRESS information models and XML schemas that together define the common information elements supporting these interfaces. Keywords:
4、 automated test system (ATS), eXtensible markup language (XML), IEEE 1636.99, session information, Software Interface for Maintenance Information Collection and Analysis (SIMICA), test results, XML schema The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5
5、997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 8 November 2013. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy,
6、 effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard
7、does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through develo
8、pments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any oth
9、er person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a
10、 given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY TH
11、EORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translation
12、s The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not proce
13、ssed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational c
14、ourses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any in
15、terested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting commen
16、ts. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to pro
17、vide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEE
18、E working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of
19、any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in
20、 compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses
21、. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any righ
22、ts in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment o
23、f licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating o
24、f IEEE Standards Documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in tim
25、e consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude
26、 that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amende
27、d through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA website at http:/st
28、andards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implem
29、entation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement
30、 of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensatio
31、n or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifyi
32、ng Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreement
33、s are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Pa
34、rticipants At the time this IEEE standard was completed, the Diagnostic and Maintenance Control Subcommittee SIMICA CommonWorking Group had the following membership: Mike Seavey, Chair Chris Gorringe Teresa Lopes Ion Neag John Sheppard Timothy Wilmering The following members of the individual ballot
35、ing committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Michael Bodkin Bill Brown Malcom Brown Keith Chow David Droste Chris Gorringe Randall Groves Werner Hoelzl Noriyuki Ikeuchi Anand Jain Teresa Lopes Greg Luri William Maciejewski Mukund Modi Charl
36、es Ngethe Leslie Orlidge Peter Richardson Robert Robinson Bartien Sayogo Mike Seavey Krishna Seeburn John Sheppard Gil Shultz Joseph Stanco Walter Struppler Ronald Taylor Benton Vandiver John Vergis Timothy Wilmering Oren Yuen Daidi Zhong When the IEEE-SA Standards Board approved this standard on 23
37、 August 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffm
38、an Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following non-voting IEEE-SA Standards Board liaisons: Richard DeBlasio
39、, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Kathryn Bennett IEEE Standards Program Manager, Technical Program Development Copyright 2013 IEEE. All rights reserved. viIntroduction This introduction is not part of IEEE Std
40、1636.99-2013, IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements. Maintainers of complex systems require the ability to capture and share historical test and maintenance-related information in a way that supports such activi
41、ties as performance analysis, post-production product improvement, maintenance process improvement, and diagnostic maturation. Principal stakeholders of this project include but are not limited to maintenance organizations within various Departments/Ministries of Defense, the commercial airlines, th
42、e automotive industry, and the telecommunications industry. This standard is being developed as a component of the IEEE 1636 Software Interface for Maintenance Information Collection and Analysis (SIMICA) project. SIMICAs purpose is to specify a software interface for access, exchange, and analysis
43、of product diagnostic and maintenance information. Maintenance action information provides a subset of the data needed to satisfy SIMICIA requirements. The use of formal information models will facilitate exchanging historical maintenance information between information systems and analysis tools. T
44、he models will facilitate creating open system software architectures for maturing system diagnostics. The XML schema described in this standard where appropriate utilizes and references components of the IEEE Std 1671 schema set. It is anticipated that these schemas will be used throughout industri
45、es that utilize diagnostic and maintenance data as an exchange format that can be understood by humans or machines. In order to ensure wide acceptance throughout the user community, the schemas have been designed to encompass a broad range of use cases. To accommodate use cases beyond the released d
46、esign, the schemas provide means for user extensibility. Copyright 2013 IEEE. All rights reserved. viiContents 1. Overview 1 1.1 General 1 1.2 Application of this documents annexes . 2 1.3 Scope . 2 1.4 Referenced IEEE Standards. 2 1.5 Application 2 1.6 Conventions used in this document . 2 2. Norma
47、tive references 4 3. Definitions, acronyms, and abbreviations 4 3.1 Definitions . 4 3.2 Acronyms and abbreviations . 5 4. SIMICA common elements 5 4.1 SIMICA common element partitioning . 5 4.2 Use of the IEEE Std 1671 Common.xsd schema. 6 5. EXPRESS model, EXPRESS-G diagram, and XML schema names an
48、d locations . 6 6. Conformance 8 7. XML schema extensibility 8 Annex A (normative) SimicaCommon XML schema . 10 A.1 SIMICACommon.xsd. 10 Annex B (normative) SimicaCommon EXPRESS models. 17 B.1 SIMICA_COMMON_MODEL_DOT_99 17 B.2 SIMICACommon model EXPRESS-G diagrams . 50 Annex C (informative) Bibliogr
49、aphy 58 Copyright 2013 IEEE. All rights reserved. viiiIEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all appl
